JFKDX K1 Wireless Microphone User Manual
- June 6, 2024
- JFKDX
Table of Contents
JFKDX K1 Wireless Microphone
ID Diagram
- Windproof net
- Microphone indicator
- Microphone Type-C
- charging port
- Microphone clip
- urn on/Off/ Pause
- Type-C/lightning port
- Receiver indicator Type-C/
- lightning port of the receiver
some Phones may have incompatib·1ilisty- problems due to system please consult your dealer for details.
How to use
Step1 Plug the microphone receiver into the phone. After the plug-in, the receiver’s indicator turns red.
If the receiver’s indicator doesn’t turn red after plug-in, you need to (search “OTG” – turn on OTG power supply) Step 2 Press the Turn on/Off/Pause button of the microphone. The indicator of the microphone turns green.
Note:
if it is the first time you use the microphone, it will search the receiver
first for pairing. During searching, the indicator of the microphone turns red
and green. After successfully connecting, the indicator turns green. Now the
microphone is ready to work.
Note:
to stop the microphone from working, you can press the Turn on/Off/Pause
button. The indicator of the microphone flashes slowly. When your phone is low
battery, you can charge it through the type-c /lightning port of the receiver.
For phones with a type-c port, charge it with the type-c cable. For phones
with a lightning port, charge it with Note, some models may not have this
function. The actual product shall govern.
When the microphone is low battery, the indicator of the microphone flashes
red light. Charge the microphone with the type-c cable. the lightning cable.
About UI
| Function | How to use | Light |
|---|---|---|
| Power on | Press button | Red and green light flashing |
| Power off | Press button for 3 seconds | Light off |
| Pairing | Red and green light |
flashing
Paired| | Green light
Pause(Mute)| Press button| Green light flashing
Low battery| | Red light flashing
Charging| Charging with Type-c cable| Charging – red light Fully Charged –
light off
Function| How to use| Light
---|---|---
Power on| Plug in the device| Red light
Power off| Plug off the device| Light off
Pairing| | Red light flashing
Paired| | Red light
Packing List
- Microphone transmitter
- Type-C/ Lightning receiver
- Type-C charging cable
- User manual
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause
undesired operation
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning:
changes or modifications not expressly approved by the party responsible
for compliance could void the user’s
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>