RUSTA 907512050101 Air Cooler User Manual

RUSTA 907512050101 Air Cooler

Air cooler
Read the user manual carefully to make sure that the product is assembled, used, and maintained correctly, as described in the instructions in this user manual. Keep the user manual for future reference.

SAFETY INSTRUCTIONS

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a
• Household and indoor use
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Unplug the appliance during filling and
• Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
• Non-specialized personnel or unauthorized repair personnel shall not to repair or modify the
• It is forbidden to operate with wet hands to avoid electric
• If the unit is not in use for a long time, unplug the power
• To prevent accidental injury or damage to the unit, please do not insert any foreign matter into the air inlet and outlet, because the unit incorporates a high-speed wind
• It is prohibited to use this unit in environments with flammable and explosive gases and direct sunlight for a long period shall be avoided.
• Do not place this unit in an inclined or another uneven place to prevent the unit from falling and causing damage to the unit or internal parts.
• Always unplug it before moving the appliance to another location
• This machine has a safety switch. If the honeycomb filter support has not been installed well, the unit will not work as usual; when the machine is working, do not remove the honeycomb filter frame.
• At any time the water level in the tank shall not
• ”MAX” (maximum) scale, and during humidification, the total water level in the tank shall be controlled, and shall not be below ”MIN” (minimum)
• After the water tank is filled with water, do not tilt or collide with the unit when placing or moving it. To move the unit body, please drive it slowly from the side to prevent water overflow.
• In using the unit, prohibit overturning to avoid any accident. If the unit topples over accidentally, and it contains water, unplug the power cord immediately and take it to repair
• Do not place items on the unit, and covering the outlet is strictly
• When wash the unit appearance, apply a damp cloth (or add a little cleaning agent) to wipe, and never use corrosive cleaning agent or solvent for cleaning. Never rinse the unit with water.
• Do not have the air inlet and outlet of the unit close to walls, curtains and other objects, or they may block the airflow and affect air supply.
• When the unit is running, do not knock at or shock the unit body forcibly or it may lead to automatic shutdown, in which case simply restart the
• In summer, the water in the tank may easily deteriorate and generate odor, please pay attention to regular change of water; if the indoor temperature is below zero in winter humidification, it is best to use warm water for
• Do not place the unit directly below the power
• Do not use the unit around the tub, sprinkler or swimming
• Product repair must be carried out in a designated
• To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
• Use a soft cloth moisten with mild soap, and then use a dry cloth to wipe it again.
• Be aware that high humidity levels may encourage the growth of biological organisms in the Environment.
• Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.

WARNING
If these instructions are not followed, an accident may lead to serious personal injury or property damage.

RULES FOR SAFE OPERATION

1. Never insert fingers, pencils, or any other object through the grille when fan is
2. Disconnect fan when moving from one location to
3. Be sure fan is on a stable surface when operating to avoid
4. DO NOT use fan in window, rain may create electrical
5. Household use

PRODUCT INTRODUCTION

NOTICE  Pictures in the manual are for reference only, and real objects within the packaging box will prevail in the end.

INSTRUCTIONS

GUIDANCE ON FEEDING WATER AND DISASSEMBLING & WASHING OF THE WATER TANK

NOTICE

• Please clean up water accumulated at the bottom of the water tank in a timely manner when the product is left
• Please remove the power plug when feeding water and
• Please make sure that the water pump module is fixed in position before startup. Random displacement of the water pump module can cause the abnormalities of the product in cool wind
• Two ways for feeding water:

1. Pull out half of the water tank, and feed water directly without disassembling the water pump module.
   Pull the water tank buckle to the horizontal state.

2. Separate water pump module, and fully pull out the water tank, to feed water or clean the water tank.
   Pull out the water tank to the position as shown in the figure (push the water tank inside after filling of water).

3. Unscrew the rotary knob in ”—” shape manually (90° anticlockwise) to separate the water tank from the water pump module (including the water pipe).

4. Pull out the water tank slowly to clean it up or feed water.

5. After feeding water or cleaning the water tank, install the water pump module in the water tank. Insert front hook into the slot of the water tank, and then rotate rotary knob in ”—” shape clockwise for 90°, and close it as shown in the figure.

6. Push the water tank inside slowly, and stir the water tank buckle to lock it up.

NOTICE

1. The ice crystal box can be frozen repeatedly and recycled; You can also choose not to use it based on the
2. Please keep the ice crystal box closed to prevent from damage and liquid
3. The ice crystal box is made of eco-friendly and toxic-free materials, and can be refrigerated in fridge
4. When using the frozen ice crystal box in the water tank, the temperature at the air outlet will drop after operating cool wind function.
5. Ice blocks can be used to replace the frozen ice crystal box, to exert the same cooling
6. Control the water level of the water tank to be lower than the ”max” (maximum) indicating scale when feeding water, and if the water level is lower than ”min” (minimum) indicating scale, please feed water in time.
7. Pull out half of the water tank below the machine.
8. Take the ice crystal box out of the package and place it inside a refrigerator to freeze for more than 3 hours. Put the frozen ice crystal box in the water tank, and feed water below ”max” (maximum) indicating scale.

OPERATING INSTRUCTIONS OF THE MACHINE BODY

The product is activated or shut down.

Air swing

|

Touch the air swing button, to activate or shut down air swing.

Wind speed| Press the button to switch wind speed to low-grade, medium-gradend high-grade.
Wind type| Press the button to select among these three types of wind: Normal wind (grade 3, the wind speed indicator light is on), sleep wind (grade 1, sleep wind the indicator light is on), natural wind (grade 1, natural wind the indicator light is on).

Timing/ Reservation

| The indicator light will be on when pressing the button under startup state, and the timed shutdown time can be set by shortly pressing the button (the cyclic is based on 1-2-3•••-7-0-1•••).

The indicator light will be on when pressing the button under standby state, and the reserved startup time can be set by shortly pressing the button (the cyclic is based on 1-2-3•••-7-0-1•••).

Cool wind

| Shortly press to open or close cool wind under startup state. The experience effect is better, when opening the cool wind function in dried or hot weather.

If indicator light flashes, please feed water in time, and repress shortly to open the function.

REMOTE CONTROL BUTTON DESCRIPTION

NOTICE

• The remote control should be normally used within 5 meters of the front of the product and 30 degrees of the deviation angle.
• The battery contains many heavy metals, acids and bases, etc., which may threaten human’s health; Waste batteries should be recycled separately.

CLEANING AND MAINTENANCE

NOTICE

• Disconnect the power before cleaning the product. Clean after the product is shut down for 2
• Prevent from using any abrasive tools and solvents that may damage the surface to clean up the Detergent can be used in the cleaning, and then wiped clean with dried cloth in time.
• Prevent from washing the machine body with water directly, and wash disassemble parts (filter parts) with a soft brush and then install them after they are cleaned and dried.
• It is not allowed to take the product apart for any modification. It is recommended that this product should be checked and cleaned regularly in order to extend its service life.

GUIDANCE ON THE DISASSEMBLY AND INSTALLATION OF FILTER PARTS

1. Remove the filter support.
2. Rotate the bottom buckle at first, and then remove the filter.
3. Take out the filter for cleaning.
4. Install filter support.

REPLACE WATER

After stopping the cool wind function for 2 minutes, it’s applicable to pull out the water tank to replace water, as water in the pipeline and filter flows back to
the water tank.

COLLECTION OF POWER LINES

1. Press winding hooks at both sides, and make it open.
2. Wind the power lines around the winding hook.

TROUBLESHOOTING

PLEASE CHECK THE FOLLOWING POINTS BEFORE ASKING OTHERS FOR INSPECTION OR MAINTENANCE

The product cannot be normally operated after being installed.

| The power cord fails to be plugged in or has bad contacts.
The machine switch fails to be opened.
The air volume is getting smaller.| The filter is dirty, and should be cleaned on a regular basis.
Abnormalities of cool wind function.| Check whether the water tank lacks water.

MAINTENANCE INSTRUCTION

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed.

1. Before cleaning and assembling, fan must be
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild
4. Do not use any abrasive detergent or solvents to avoid scratching the Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior

CLEANING

1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove soap film with dry cloth.

RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original receipt in the event of a complaint. The user is liable for any damage to the product that is caused by not using the product for its intended purpose or by not following this user manual correctly. The right of complaint will not apply in these instances.

INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from household waste. They should be taken for recycling in accordance with local rules for waste management.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>