GL GRUP BUDDY Wireless Headphone User Manual

GL GRUP BUDDY Wireless Headphone User Manual

Product Overview

1. Power Switch
2. Mode Button
3. Up Button
4. Down Didion
5. Micro-USB
6. AUX
7. Light
8. TF card
9. Mic

How to Charge the Headphones?

Please DO NOT use QUICK Charging adapts with Charging Voltage upper than: DC SV -. Any normal adapters from iPhone Samsung Phone etc. would be suitable for your headphones. We recommend you to charge the headphones from laptop as the best way of charging.

Specifications

• Working Distance Range; 10 M
• Charging Time: About 4 hours
• Playing Time: About 10 hours

Button Description

• / / : ON/OFF Switch/ Play or Pause Music/ Answer or Reject Calls/ Double press for re-dialing the last number
• M : Three kinds of playback modes switch (if Mode , Bluetooth Mode, flashing lights on/off switch)
• : Long press for Next song / Short press for increasing volume
• :long press for Previous song/ Short press for reducing volume

Bluetooth Function Description

1. Pairing Operation:
   a. When you pair via Bluetooth for first time: Turn on the Bluetooth headphone by holding the on /off button for 3-5 seconds. It will boot into Bluetooth mode automatically, voice prompts “Bluetooth Mode”, LED indicator light rapidly alternating flashes with blue and green colors. Please open the smart device’s Bluetooth searching function, and select the device “Power Locus Buddy”, no password required, after successful pairing, voice prompts “Connected”, LED indicator light stays blue.
   b. Pair to a new device: Turn off the attached smart device’s Bluetooth function, voice prompts “Disconnected”, LED indicator light rapidly alternating flashes with blue and green colors. Open other device’s Bluetooth searching function, and select the device “PowerLocus Buddy”, no password required, after successful pairing, voice prompts “Connected”, LED indicator light stays blue. c. Pairing to previously connected device: After powered on the headphone automatically pairs the last connected device in 3 seconds after boot.
   d. Connect two devices at the same time: Remark: When you need to connect the headphone with two Bluetooth devices at the same time, you need to connect with both of the devices first

2. Answer Call: Short press / / when call is coming.

3. Hang up phone calls: Short press / / after calling.

4. Reject Calls: Long press / / .

5. Redial the last number: Double-click / /

6. Music Play: Short press / / % after connected with the smart device.

Micro SD Card playback Mode

1. When the slot is empty, inserted the Micro SD Card, voice prompts “music”. Then it plays media automatically.
2. When the Micro SD Card is inside, switch to TF Mode through “M”.

Blinking lights on/off switch:

Within the headphone is on, turn on or off the breathing lights by long pressing “M”.

Line-in Mode
When the headphone is on, insert the Aux-in cable, voice prompts “Line-in, mode. Thai it plays smart device’s media automatically.

1. Maximum/ minimum volume waning voice prompt “du du”,
2. Supports mP3, WAV format playback.
3. Battery indication on IOS.
4. Micro USB as common use dimming port

LED Indicator light status

Charging Status| Steady red LED. When fully charged, the blue LED indicator light turn **on.
---|---
Power on Status| Blue LED indicator light turns on.
Power of Status| LED indict light turns off.
Pairing Status| Blue and rem LED indicator lights rapidly alternating flash.
Standby St atus| Blue LED indicator light turns on.
Connected Status| Blue LED indicator light tunas on.
Using Status| Bluetooth Mode, Blue LED indicator light flashes slowly.
TF Mode, green LED indicator light flashes slowly.**

Line-in Mode, the headphone automatically  turns  off’, LED lig ht turns off

Note: If no pairing Connection after the Bluetooth headphone enters the pairing mode, please turn of the headphone as for power saving. Do not perform other operations when searching Murano& to prevent the program CM3r. Please select the app volume in use to prevent dan3age to your sm. Please note that a good environment while using the Bluetooth headphone can avoid damage to the product Please charging the headphone after a long time none-use.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>