Shenzhen Youcaijia Technology BD7606 7-Color Backlit Wireless Keyboard User Manual

Shenzhen Youcaijia Technology BD7606 7-Color Backlit Wireless Keyboard

Thank you very much for purchasing this backlight wireless Bluetooth keyboard. Please email us if you have any question or suggestion for this product. We will do our best to assist you.

Product Information

Bluetooth version: Bluetooth 5.1 Keyboard
Working range: 10 M
Battery capacity: 1600 mAH
Working current (without backlight): 1.5 mA
Wor1hours (without backlight): 10001>ours
Working current with the brightest backlight: 200 mA
Worldng time with the brightest bacldlght: 8 hours
Charging time; 3 hours
Slandby lime: 2100 hours
Backlight sleep mode: after 2 minutes off not use
Keyboard sleep mode: atter 30 minutes of not use

Package Content

• Backlight Wireless Bluetooth Keyboard * l
• Type C Charging Gable * 1
• User Manual * 1

LED Indicator Light

Press ·Fn Lock”, the LE01 flashes green light
Press “Caps Lock”, the LED2 flashes groon light
Press “Number Lock”, the LED3 fashes green light
LED4 flickers red light slowly if the keyboard is under low battery
LED4 flashes red light whlle charging and will be off if fully charged

Back Light User Guide

1. Pross and hold key, press key to adjust tho brightness of the backlight Low-Mid-High-Off.
2. Press and hold key, press key 1oadjust bacidight colors, 7 colors in total.

Warning

1. Do not squeeze, twist or hit the keyboard.
2. Do not put this product in microwave, or strong magnetic field.
3. Prevent splashing, make sure the using environment is dry.
4. Please use a soft dry cloth matetial to clean the keyboard. Remember to tum off the keyboard when not using.

Troubleshooting Common Problems

1. Make sure your keyboard is fully charged before use.
2. Make sure your keyboard is in its working range. (11 yards)
3. Make sure you have turned on the Bluetooth functioned when you connect.
4. Make sure you have been successfully paired to the tablet.
5. Clean up the Bluetooth pairing deviee-s on your laptop and try repairing.
6. Do not pair multiple keyboards to the same device.

How to Connect my Device to 2 or 3 or  4 Channel

1. Hold and press then press key to switch to the corresponding Bluetooth Channels, and then press Connect button until the LED indicator light flashes quickly. you can follow the connection steps of your device above to connect the keyboard.

2. When you successfully connected 2 or3 or 4 devices. you can switch among the devices easily by pressing the button

3. The keyboard supports aut-reoonnect. It will automatically connect to the previous devioe when you turn on the keyboard. (make sure you have turned on the Bluetooth). If you connect the keyboard to two or three devices. when you tum on the keyboard, it will automatically connect to the last connected device.

iPad/iPhone Pairing Steps

1. ⇨-Turn on the keyboard

2. Hold and press key, press key, LED 1 Blue light will be on for 1s and then off.

3. Press and hold for 3s, LED1 blue light flashes quiekly, your keyboard enters piaring mode and waiting for

4. Find “settings” on your device and tum on Bluetooth”.

5. Find”Bluetooth 5.1 Keyboard”. click pair

6. Click ·oonneced”, and your keyboard have been successfully connected to your device.

Please Note:

Once you have connected the keyboard, please follow the following steps to finish the setup. Otherwise, they might not be able to function properly.

Hua Wei Tablet Pairing Steps

1. ⇨-Turn on the keyboard

2. Hold and press key, press key, LED 1 Blue light will be on for 1s and then off.

3. Press and hold for 3s, LED1 blue light flashes quiekly, your keyboard enters piaring mode and waiting for

4. 5. This Bluetooth keyboard support aut reconnect. Turn on the keyboard and it will automatically reconnect to the last connected device (Make sure you have turned on the Bluetooth)

Samsung Tablet Pairing Steps

1. ⇨-Tum on the keyboard

2. Hold and press key, press key, LED 1 Blue light will be on for 1s and then off.

3. Press and hold for 3s, LED1 blue light flashes quiekly, your keyboard enters piaring mode and waiting for

Pairing Steps For Tablet With Windows System

1. ⇨-Tum on the keyboard

2. Hold and press key, press key, LED 1 Blue light will be on for 1s and then off.

3. Press and hold for 3s, LED1 blue light flashes quiekly, your keyboard enters piaring mode and waiting for

Mac Pairing Steps

1. ⇨-Tum on the keyboatd

2. Hold and press key, press key, LED 1 Blue light will be on for 1s and then off.

3. Press and hold for 3s, LED1 blue light flashes quiekly, your keyboard enters piaring mode and waiting for

4. Turn no Bluetooth oo your device, search for “Bluetooth 5.1 keyboard”, pair.

5. The keyboard connects in few seconds.

6. This Bluetooth keyboard support auto-reconnect. Turn on the keyboard and it will automatically reconnect to the last connected device (Make sure you have tumed on the Bluetooth)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any  interference received, induding interference that may cau.se undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

NOTE: This equipment has been tested and found ·to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. Thes.e limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partkular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit di fferent from that to which the receiver is connected.
— Con.suit the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>