RENISHAW M-6195-9321-03-A Advanced Diagnostic Tool User Guide
- June 6, 2024
- RENISHAW
Table of Contents
RENISHAW M-6195-9321-03-A Advanced Diagnostic
System compatibility
- QUANTiC ™
- VIONiC ™
- ATOM DX ™
System requirements
- PC, laptop, or tablet with administration rights*
- USB 1.1 A to mini B cable, A-9572-0098
- ADT View software www.renishaw.com/adt
- ADT-100
- Adaptor cables for readheads with alternative pin-outs †
- QUANTiC analogue output only:
- Termination tool (120 ohms), A-6195-2132
- Adaptor cables, A-6637-1540 (pair of 15-way D-type male to female cables)
System connection
Tethered
The ADC-100 is connected to the readhead and powered via the PC’s USB port.
QUANTiC (digital output), VIONiC and ATOM DX:
In-line
The ADT-100 is connected between the readhead and the controller as part of
the control loop.
QUANTiC (digital output), VIONiC and ATOM DX:
Minimum requirements:
- Windows ® operating systems (×86 or ×64): 7 SP1, 10
- Quad-core 1.44-1.92 GHz processor
- 2 GB DDR3 RAM
- 5 GB disk space (including 2.5 GB for.NET)
- 500 MHz GPU capable of 1024 × 600 resolution or higher † Connections are shown for standard 15-way D-type pin-out. For redheads with alternative pin-outs or connectors adaptor cables are required. Contact your local Renishaw representative for more information.
Software operation
For worldwide contact details, visit www.renishaw.com/contact
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.
© 2016 – 2021 Renishaw plc. All rights reserved. Renishaw reserves the right
to change specifications without notice. RENISHAW and the probe symbol used in
the RENISHAW logo are registered trademarks of Renishaw plc in the United
Kingdom and other countries.
apply innovation and names and designations of other Renishaw products and
technologies are trademarks of Renishaw plc or its subsidiaries. All other
brand names and product names used in this document are trade names,
trademarks, or registered trademarks of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>