inspire XTL7035C Lamp Instruction Manual
- June 6, 2024
- iNSPIRE
Table of Contents
inspire XTL7035C Lamp
Warning symbols
| ****
Read the instructions carefully.
---|---
| Safety Class II. This lamp is doubly insulated and may not be wire to a
protective conductor
| ****
The luminaire for indoor use only.
General Safety Instructions
Read this instruction manual thoroughly before using the appliance and save it
for future reference and if necessary pass the instruction manual on to a
third party.
WARNING: When using electrical appliance, basic safety precautions should
always be followed to reduce the risk of fire, electrical shock and personal
injury.
General
Any visitor, especially children, shall be kept away from the work area. Check
if the electrical specifications of this luminaire are compatible with your
installation. WARNING: The power supply must be deactivated prior to assembly,
maintenance, exchanging the bulb or cleaning processes. Remove the fuse or
switch the fuse to OFF and secure from reactivation. luminaire is not suitable
for mounting on tubular material.
For indoor use only. After switch off 5-10 minutes , exchange the bulb when
the bulbs have been cooled down.
Electrical safety
Luminaire should be installed by authorized electrician only according to
national wiring rules.
Warning: if the external flexible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the manufacturer or his service
agent or a similar qualified person in order to avoid a hazard.
Specific Safety Rules
No specific Safety Rules apply.
Environmental protection
CAUTION!
Electrical products must not be thrown out with domestic waste. They must be
taken to a communal collecting point for environmentally friendly disposal in
accordance with local regulations. Contact your local authorities or stockist
for advice on recycling. The packaging material is recyclable. Dispose of the
packaging in an environmentally friendly manner and make it available for the
recyclable material collection service.
Appliance specifications
TECHNICAL CHARACTERISTICS
Rated voltage| 220-240V
Rated frequency| SOHz
Rated wattage| Max.LED SW
Bulb rating| GUlO Max.LED SW
Ambient Temperature| 25°C
Protection class| Class II
IP number| IP 20
Maintenance/ Cleaning
- Disconnect from mains before maintenance or cleaning.
- Repairs should only be carried out by qualified persons and using genuine spare parts. Inappropriate repairing could cause significant danger.
- Always use bulbs according to specifications listed in this manual.
WARNING: The use of any accessory not specified in this manual may present a risk of personal injury.
Others (Service, Repairi ng, Guarantee, etc.)
- Have your product repaired by a qualified person.
- This electric product is in accordance with the relevant safety requirements.
- Repairs should only be carried out by qualified persons using original spare parts, otherwise This may result in considerable danger to the user.
- Please contact the store which you bought the product for after sale services if any.
ASSEMBLY
USE
