emerio WK-122248 Tea & Water Kettle Instruction Manual
- June 6, 2024
- emerio
Table of Contents
emerio WK-122248 Tea & Water Kettle
SAFETY INSTRUCTIONS
Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual. In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.
- This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
- Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
- Keep the appliance and its cord out of reach of children aged less than 8 years.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environment; bed and breakfast type environments.
- If the kettle is overfilled, boiling water may be ejected.
- When cleaning, the appliance must not be immersed.
- Regarding the instructions for cleaning the surfaces which come in contact with food, please refer to the paragraph “CLEANING AND MAINTENANCE” of the manual.
- Warning: Avoid spillage on the connector.
- There is a potential risk of injuries from misuse.
- The heating element surface is subject to residual heat after use.
- Before inserting the plug into the mains socket, please check that the voltage and frequency comply with the specifications on the rating label.
- Disconnect the mains plug from the socket when the appliance is not in use and before cleaning.
- Ensure that the mains cable is not hung over sharp edges and keep it away from hot objects and open flames.
- Do not immerse the appliance or the mains plug in water or other liquids. There is danger to life due to electric shock!
- To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
- Do not touch the appliance if it falls into water. Remove the plug from its socket, turn off the appliance and send it to an authorized service center for repair.
- Do not plug or unplug the appliance from the electrical outlet with a wet hand.
- Never attempt to open the housing of the appliance, or to repair the appliance yourself. This could cause electric shock.
- Do not use the appliance for other than intended use.
- Do not operate the appliance without water to avoid damaging the heating elements.
- Should you accidentally allow the kettle to operate without water; the boil-dry protection will automatically switch it off. If this should occur, allow the kettle to cool before filling with cold water and re-boiling.
- Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
- Do not touch the hot surface. Use the handle or the button.
- Extreme caution must be used when moving an appliance containing hot water.
- The kettle is for household use only, not for outdoor.
- Our warranty does not cover water kettles that malfunction resulting from failure to descale.
- If you wish to stop the kettle before the water has boiled, you must switch off the appliance before removing the kettle from its base.
- The kettle is only to be used with the base provided.
- Ensure that the appliance is used on a firm and flat surface out of reach of children, this will prevent the kettle from overturning and prevent damage or injury.
- While the water is boiling or just after the water has been boiled, avoid contact with steam from the spout.
- Be careful of refilling when the appliance is hot.
- Do not detach filter during normal use to avoid spilling over.
- To disconnect, turn off the appliance and then remove the plug from the wall outlet.
PARTS DESCRIPTION
- Lid
- Handle
- Spout
- Anti-calc filter
- Water gauge
- Power base
- Control panel
- Tea-brewing basket
Control panel
- On/off button with indicator light
- Strength button
- Indicator light of the strength of tea: Strong
- Indicator light of the strength of tea: Medium
- Indicator light of the strength of tea: Mild
- Indicator light of the strength of tea: Custom
- Time setting buttons
- Digital display (e. Brewing temperature / f. Brewing time)
- Temperature setting buttons
- Tea button
- Indicator light of the type of tea: Green
- Indicator light of the type of tea: Black
- Indicator light of the type of tea: White
- Indicator light of the type of tea: Herbal
- Indicator light of the type of tea: Oolong
- Indicator light of the type of tea: Custom
- Keep warm button with indicator light
- Auto start button with indicator light
BEFORE USING YOUR APPLIANCE
If you are using the appliance for the first time, it is recommended that you
clean your appliance before use by brewing a full kettle of water twice and
then discarding the water.
Note: The maximum capacity and minimum capacity for brewing water is 1.7L
and 0.5L. The maximum capacity and minimum capacity for brewing tea is 1.0L
and 0.5L.
OPERATION
Brew water
- Rotate the kettle lid anti-clockwise to turn the mark “OPEN” (on the rim of the lid) align with the mark “▲”. Lift the lid; pour out left over water from the previous brewing cycle and fill with the desired amount of fresh water to the kettle. Rotate the kettle lid clockwise to turn the mark “CLOSE” (on the rim of the lid) align with the mark “▲” to lock the kettle lid in place.
- Put the kettle body on the power base and plug the appliance into an appropriate electrical outlet. A beep sound will be heard.
- Press the temperature setting buttons to set your desired brewing temperature (70-100℃). Press the time setting buttons to set the time to “0:00”.
- Press the button “ON/OFF”, the digital display firstly shows “- -” and then shows the current water temperature. The appliance starts to brew water.
- When the temperature reaches the set temperature, 3 beep sounds will be heard. The appliance will stop working and the digital display will extinguish after approx. 20 seconds.
Note: for brewing water, it is recommended to take the tea-brewing basket out of the kettle by the ring-pull on the top of the basket.
Brew tea
- Rotate the kettle lid anti-clockwise to turn the mark “OPEN” (on the rim of the lid) align with the mark “▲”. Lift the lid; pour out left over water from the previous brewing cycle and fill with the desired amount of fresh water to the kettle. Add some tea leaves into the tea-brewing basket. Rotate the kettle lid clockwise to turn the mark “CLOSE” (on the rim of the lid) align with the mark “▲” to lock the kettle lid in place.
- Put the kettle body on the power base and plug the appliance into an appropriate electrical outlet. A beep sound will be heard.
- Firstly, press the button “TEA” to select your desired type of tea: “Green”, “Black”, ”White”, “Herbal” and “Oolong”. Its corresponding indicator light will illuminate and the digital display will show the corresponding brewing temperature. If you want other type of tea, press the button “TEA” to select “Custom” and then press the temperature setting buttons to set your desired brewing temperature (70-100℃).
- Secondly, press the button “Strength” to select your desired tea strength: “Strong”, “Medium” and “Mild”. Its corresponding indicator light will illuminate and the digital display will show the corresponding brewing time. If you want other strength of tea, press the button “Strength” to select “Custom” and then press the time setting buttons to set your desired brewing time (0-10minutes).
- Finally, press the button “ON/OFF”, the digital display firstly shows “- -” and then shows the current water temperature. The appliance starts to brew water.
- When the temperature reaches the set temperature, the tea-brewing basket will go down into the water and the brewing time will start to count down. When the brewing time is “0:00”, the tea-brewing basket will go up automatically and 3 beep sounds will be heard. The appliance will stop working and the digital display will extinguish after 20 seconds.
Reference pre-set programmes for brewing temperature and brewing time
Type of tea
Tea Brewing
strength temperature/time
| ****
Green
| ****
Black
| ****
White
| ****
Herbal
| ****
Oolong
---|---|---|---|---|---
Strong| 80℃/4min| 100℃/3min| 85℃/4min| 100℃/5min| 90℃/4min
Medium| 80℃/3min| 100℃/2min| 85℃/3min| 100℃/4min| 90℃/3min
Mild| 80℃/2min| 100℃/1min| 85℃/2min| 100℃/3min| 90℃/2min
Auto start function
- If you want to set the auto start time to brew water, firstly follow the steps “1) – 3)” in section “Brew water”. If you want to set the auto start time to brew tea, firstly follow the steps “1) – 4)” in section “Brew tea”.
- And then follow the below steps:
- Press and hold the button “AUTO START” for approx. 2 seconds. The indicator light of the button “AUTO START” will illuminate in blue and the digital display will flash the “CURRENT TIME” and the “START TIME”.
- Press the temperature setting buttons to set the current time, the digital display will show the value under “CURRENT TIME”. Press the time setting buttons to set the start time, the digital display will show the value under “START TIME”. (See below picture.) The time cycle is 24 hours. Long press for rapid adjustment.
- Then press the button “ON/OFF” to enter into the auto-start working mode. The digital display will extinguish after 20 seconds.
- When the current time counts to reach the start time, the appliance will start brewing.
Keep warm function
- Press the keep warm button during brewing, its indicator light will illuminate in blue. After brewing is finished, 3 beep sounds will be heard and then the appliance will enter into keep-warm mode. The digital display will start to count the time and extinguish after approx. 20 seconds. You can press any button to turn on the digital display to check the current temperature and the keep warm time. The whole keep-warm process will last 30 minutes. The keep-warm temperature is ≥60℃. Press the button “ON/OFF” or “Keep warm” to exit the keep warm function. Under keep-warm mode the tea-brewing basket should not move. It should stay on top.
- Press the keep warm button after the brewing is finished, the digital display will show “- -” and then show the current water temperature.
- If the current water temperature is ≥60℃, the appliance will enter into keep-warm mode. The digital display will start to count the time and extinguish after approx. 20 seconds. The keep warm function will operate as above.
- If the current water temperature is <60℃, the appliance will not enter into keep-warm mode. The digital display will flash the temperature value 3 times and extinguish after approx. 20 seconds.
Tips
- The digital display will extinguish in approx. 20 seconds with no operations. If you want to do further operations, press any button first to turn on the digital display and then press the buttons to choose your desired functions.
- The appliance will not work if the set temperature is lower than the current water temperature.
Boil-dry protection
Should you accidentally let the kettle operate without water, the boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to cool before filling with cold water and re-boiling.
CLEANING AND MAINTENANCE
- Always let the kettle cool down first and disconnect the appliance from the power outlet before cleaning. Never immerse the kettle or base into the water or other liquid to avoid electric shock.
- Never immerse the kettle, power cord or power base in water, or allow moisture to contact with these parts.
- Wipe the appearance of kettle and base with a mild and damp cloth or cleaner, never use a corrosive cleaner. CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the kettle.
- Do not immerse the kettle lid into the water and wipe it with a wet cloth.
- The power cord can be stored under the power base when the kettle is not used.
Removal of mineral deposits
Your kettle should be periodically descaled as the mineral deposits in tap
water may form scale on the bottom of the kettle so as to cause the operation
less efficiency. You can use the commercially available descaler and follow
the instructions on the package of the descaler. Alternatively, you may follow
below instructions using the white vinegar.
- Fill the kettle with 3 cups of white vinegar, and then add water to the amount so as to cover the bottom of the kettle completely. Leave the solution in the kettle overnight.
- Discard the mixture in the kettle, fill the kettle with clean water, boil and then discard the water. Repeat several times until the odor of vinegar has been flushed away. Any stains remaining inside the spout can be removed by rubbing with a damp cloth.
To clean the filter
Hold and pull the ring (A) out from the kettle body (fig.1&2). Rinse the
filter under running water. Use a brush to clean it if needed. Push the ring
back to the kettle body.
TECHNICAL DATA
- Operating voltage: 220-240V ~ 50-60Hz
- Power: 1850-2200W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee: For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase. Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we hold responsible for material damage or personal injury caused by improper use if the instruction manual are not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance or the replacement of said parts are not covered by the warranty and are to be paid.
ENVIRONMENT FRIENDLY DISPOSAL
Recycling – European Directive 2012/19/EU This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Emerio Holland B.V. Zomervaart 1A
2033 DA Haarlem The Netherlands
Customer service:
T: +31(0)23 3034369
E: info.nl@emerio.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>