ALTEC LANSING IMW339 FuryX Wireless Speaker Instruction Manual
- July 26, 2024
- Altec Lansing
Table of Contents
HFMRR0108F01 A0
REV
| Change Description| Changed By| Date
---|---|---|---
A0| | |
20240110
| | |
| | |
| | |
IMPORTANT
PLEASE DO NOT RETURN TO STORE
If You’re Having Trouble, We’re Here to Help!
Call us 24/7 at 1-855-292-4087
E-mail us at alsupport@sakar.com or visit us at
alteclansing.com
REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or firmware updates, warranty information and more please register your product at
WELCOME
Thank you for purchasing an Altec Lansing product. Download our App to unlock all the features our products have to offer!
follow us
@alteclansingofficial
follow us
@alteclansing
follow us
@alteclansingofficial
12 Month Limited Warranty
All Altec Lansing products come with 12 month limited warranty from the date of its original purchase
24 Hour Customer Support
We love our customers, and we care about your experience with Altec Lansing.
If you need assistance, please call us at
1.855.292.4087
or e-mail alsupport@sakar.com
JUST LISTEN.
FuryX Wireless Speaker
IMW339
QUICK START GUIDE
In the Box
FuryX Wireless Speaker USB-C Charge Cable
Carabiner
A Closer Look
——————
Voice Assistant
- Power/Answer/Voice Assistant
- Volume Down/Previous Track
- Volume Up/Next Track
- Play/Pause
- LED Indicator
- Mic
- USB-C Charging Port
PRESS x2
To activate voice assistant on the connected phone.
Charging
-
(Red)=Charging
(O )=Charging Complete -
About 2 Hours
Full Charge
Bluetooth® Pairing
-
PRESS & HOLD
1-2 SEC
TO POWER ON -
Pairing Mode
Blue Flashing LED -
Paired
(Blue Always On)
True Wireless Pairing
-
Speaker 1
-
Green Flashing LED
-
PRESS x2
Green Flashing LED -
PRESS & HOLD
2 SEC -
Blue Flashing LED
-
Speaker 2
-
Speaker 1
(left channel) -
Speaker 2
(right channel)
Controlling Music
-
Press: Vol –
Hold 1S: Previous Track -
Press: Vol +
Hold 1S: Next Track -
Press: Play/Pause
FCC Statement
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: The device has been evaluated to meet
general RF exposure requirement. The device can be used in the portable
exposure condition without restriction.
Altec Lansing . Edison, NJ 08817
CALL:1-855-292-4087
ALTECLANSING.COM FCC ID:2A8JA-IMW339
Calls
-
Press: Answer/End Call
Hold 3S: Reject Call -
Press: Vol –
-
Press: Vol +
Note: When two speakers are connected using True Wireless Pairing, only the first speaker paired will receive phone calls.
For additional user materials and warranty information, please visit alteclansing.com
THE INFORMATION CONTAINED HEREIN IS CONFIDENTIAL AND PROPRIETARY AND MAY NOT BE DISCLOSED OR USED IN ANY WAY WITHOUT THE EXPRESSED WRITTEN PERMISSION OF DE INC.
FIRST ANGLE PROJECTION
| |
DES BY
|
2024/1/10
|
Dolphin Electronics (DongGuan) Co.,LTD
---|---|---|---|---
GENERAL TOLERANCE LINE DIMS ANG DIMS
| CHK BY| | PART NAME|
0-6 ±0.05
6-15 ±0.08
15-30 ±0.12
30-50 ±0.15
50- ±0.20| X ±1°
XX ±0.5°
XXX ±0.3°| APR BY | | MODEL NAME|
BK311 (IMW339)
SUFACE
| /| DRAWING NO.| Y7001XXX
UNIT:mm| ORIGINAL SIZE:A4| SCALE 4:1| SHEET 1/1| MATERIAL|
/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>