Paulmann 94648 Tubs Outdoor Wall Light with Motion Detector Instructions
- October 30, 2023
- Paulmann
Table of Contents
94648 Tubs Outdoor Wall Light with Motion Detector
Product Information
- Brand: Paulmann Licht GmbH
- Product Model: 946.48 946.49 (+MA 326) PXI 07/22
- Max Power: 15W
- IP Rating: IP44
- Includes: Mounting holes, E27 bulb socket, PRI sensor (only in 946.48)
Product Usage Instructions
- Read and follow safety instructions listed as numbers 1-7 and 10.
- Visit www.paulmann.com/symbols to understand product symbols.
- For 946.48, insert a bulb with a maximum power of 15W into the E27 socket and attach the PRI sensor.
- For 946.49, insert a bulb with a maximum power of 15W into the E27 socket without the PRI sensor.
- Mount the product using the provided mounting holes, ensuring that the distance between the holes is between 7mm and 14mm.
- The product can be installed in an upward position (UP).
- Ensure that the power supply is off before installation or maintenance.
- Set the daylight sensor by adjusting the switches as follows:
- Switch G1 and G2 to “on” position for 946.49 or “off” position for 946.48.
- Move the switch to “-” position for at least 5 seconds.
- Move the switch to “+” position to adjust the light sensitivity. For daylight mode, set the sensitivity to a minimum of 10 Lux.
- Move the switch to “-” position to adjust the time delay. The maximum delay is 8 minutes.
- Move the switch to “+” position to adjust the detection range. The range should be between 1.5m to 2m.
In The Box
Installation
Replaceability
- (1) Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire.
- (2) Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire.
- (3) Light source or (6) operating device is not replaceable, the luminaire must be replaced.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>