hama 201613 Car Charger Kit Instruction Manual

Hama 201613 Car Charger Kit

Overview

Operating instruction

Thank you for choosing this Hama product! Take your time and read the following instructions and information completely. Please keep these instructions in asafe place for future reference

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates arisk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

•  Car charger
•  Charging cables
•  These operating instructions

Safety instructions

•  When using this product, observe the applicable local traffic laws and regulations.
• take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.
•  Do not allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.
•  Protect the product from dirt, moisture and overheating and use it in dry environments only.
•  Do not drop the product and do not expose it to any major shocks.
•  Do not operate the product outside the power limits specified in the technical data.
•  Do not modify the device in any way. Doing so voids the warranty.
•  Do not continue to operate the product if it is visibly damaged.
•  Use the product only for the intended purpose.
•  As with all electrical products, this device should be kept out of the reach of children.
•  Do not bend or crush the cable.
•  Always pull directly on the plug when disconnecting the cable, never on the cable itself.
•  Don’t use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
•  Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Only use the article under moderate climatic conditions.
• Donot use the product in areas in which electronic products are not permitted.
• Do not use the product in a damp environment and avoid splashing water.

Risk of electric shock

•  Do not open the device or continue to operate it if it becomes damaged.
•  Do not use the product if the charging cable, adapter cable or power cable is damaged.
•  Do not attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

Operation

Note -12V,24Vvehicle electrical systems
The charger is suitable for 12 Vand 24 Vehicle electrical systems.

Warning -connecting devices

•  Before connecting a device, check whether it can be adequately supplied with the charger’s current capacity.
• Ensurethat the power of the connected device does not exceed 12 W.
• Note the instructions in your device’s operating manual.

Note -QC3.0, 2.0

•  Plug &GO: no additional software is required, simply plugin and start:
• Thanks to QC 3.0, 2.0, the voltage and power are adjusted automatically.
•  Be aware that, for efficient and optimized charging, your terminal device must support the QC 3.0, 2.0 function.
•  If you have a large number of QC-enabled devices with different firmware updates, it may be that the function is not fully supported.Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:
•  Connect your device to the USB charging socket using a suitable USB cable.
• then connect the charger to the onboard electrical system’s car socket.
•  The charging process is displayed on your device.
•  Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
•  Then disconnect the charger from the line connection.
• When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.

Note -car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off.You should therefore disconnect the product from the line connection when not in use to protect your car battery from being drained.

Care and maintenance
Only use soft, dry towels to clean the product.

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technical data

Chargeur pour voiture

Tension du circuit de bord| 12 V, 24 V
Tension de sortie/ courant de sortie max.| 5.0 VDC/2.4 A/ 12 W
Puissance de sortie totale| 12 W max.

Warranty disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>