hama 00201684 Wireless Charger for Smartphones Instruction Manual

June 6, 2024
Hama

hama 00201684 Wireless Charger for Smartphones Instruction Manual

Controls and displays

  1. USB-C input
  2. Status LED

LED function indicator

Power supply| Red – Blue – Violet
Standby| Solid red
Charging process| Solid blue
End of charging| Solid violet (Samsung), solid blue (Apple) 1)
Error message| Flashes alternately red and blue

The display at the end of charging may differ on some devices, depending on the manufacturer.

Thank you for choosing a Hama product.

Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

WarningWarning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

  • “QI-FC10S” Wireless Charger for Smartphones
  • 1x USB-C cable
  • these operating instructions

Safety instructions

  • Protect the product from dirt, moisture and overheating and use it in dry environments only.
  • Do not drop the product and do not expose it to any major shocks.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not use the product in areas in which electronic products are not permitted.
  • Ensure that the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.
  • Dispose of packaging material in accordance with the locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Use the product only for the intended purpose.
  • Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
  • As with all electrical products, this device should be kept out of the reach of children.
  • Only use the article under moderate climatic conditions.
  • Do not use the product in a damp environment and avoid splashing water.
  • The product is intended only for use inside buildings.
  • This product is not intended for use by persons, including children, with limited physical, sensory or mental abilities or lacking in experience or knowledge, unless they are supervised by a person responsible for their safety or have been instructed on how to use the product.
  • Pull directly on the plug when disconnecting the cable, never on the cable itself.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not bend or crush the cable.
  • Do not place any liquid-filled vessels such as flower vases on or in the immediate vicinity of the product. The vessel may topple over and the liquid can then impair the electrical safety.

Risk of electric shock

  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Warning
Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted

Warning
Ensure that there are no metal parts (e.g. metal plate for magnetic holders) on the back of your device.
Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.

Start-up and operation

Start-up and operation
Start-up and operation

Warning

  • Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
  • Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
  • If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
  • If you will not be using the product for a prolonged period, disconnect it from mains power.

Note

  • To be able to charge your device via the wireless charger, it must be compatible with induction charging technology. Please refer to the operating instructions of your device for more information.
  • Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the back of your device may interfere with or even prevent the charging process.
  • Connect the enclosed USB-C cable with the USB-C input (1) on the inductive charger and a suitable USB charger. When doing so, consult the operating instructions for the USB charger.

Note

  • The maximum charging power of up to 10W is only achieved with a Qualcomm quick charging device (9V/1.67A).
  • An active power supply is confirmed by the brief, alternate illumination of the status LED (2) in red – blue – violet. The LED then switches to red.

Warning

  • Do not use defective chargers or USB ports and do not attempt to repair them.
  • Place your device with its back on the inductive charger (B).
  • The charging process begins as soon as an effective induction field has been established. The status LED (2) lights up solid blue. The current charge status is displayed on your device.
  • If no induction connection can be established, change the position of your device if necessary (B).
  • The charging process ends automatically once your device’s battery is fully charged. The status LED (2) lights up solid violet (Samsung) or blue (Apple).
  • Remove your device from the inductive charger and disconnect it from the power supply

Care and maintenance

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners. Ensure that no water is able to enter the product.

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

Technical data

Wireless charger

Input| 5V 2.0 A

9V __1.67 A (QC)

Output (under optimized conditions)| 5W / 7.5 W/ 10 W max.
Dimensions| 72 mm x 110 mm x 85 mm

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00201684] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com->00201684->Downloads.

Frequency band(s) 110.26-147.44 kHz
Maximum radio-frequency power transmitted -16.55 dBµA/m at 10 m

hama

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals