BeraShield BB02AI01 Smart Phone Charger User Manual
- June 6, 2024
- BeraShield
Table of Contents
User manual
Product Name: BeraShield Battery
Model Name: BB02AI01
FCC ID 2AXTGBB02AI01
BeraShield Battery How to use
How to charge another device
Press the power button to turn it on.
The blue LED means the fast charging Mode mode has been activated.
The white LEDs show the current power button battery levels.
Press and hold the power button for 5 seconds to switch the charging speed.
Blue: The fast charging
Green: The normal charging
Attach the battery to the BeraShield Case to start charging.
Press the power button twice quickly to turn the BeraShield Battery off.
(If not, it will automatically turn off after 10 seconds.)
How to charge the EteraShield Battery
Press the power button and place it on the BeraShickl Charger. It
automatically sticks to the position for the best wireless charging efficiency
with strong internal magnets. The red LED turns on when wireless charging is
started.
Stack charging function (maximum tea)
-
Prepare a cell phone(device).
-
Attach the provided phone case with the device.
-
Attach the auxiliary battery to the phone case. (The phone case and battery are magnetically attached.)
-
When the battery is attached, the cell phone starts charging.
Care and use your device properly
Do not store your device near magnetic fields
Your device may malfunction or the battery may discharge from exposure to
magnetic fields.
Magnetic stripe cards, including credit cards, phone cards, passbooks, and
boarding passes, may be damaged by magnetic fields. Prolonged exposure of your
skin to an overheated device may cause low-temperature burn symptoms, such as
red spots and pigmentation Ensure maximum battery and charger life
Batteries may malfunction if they are not used for extended periods.
Over time, unused devices will discharge and must be recharged before use.
Disconnect the charger from power sources when not in use.
Use the battery only for their intended purposes
Do not disassemble, modify, or repair your device
Copyright
Copyright 0 2020 Smart Guardians Inc.
This manual is protected under international copyright laws.
No part of this manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval
system.
Trademarks
BeraShield and the BeraShield logo are registered trademarks of Smart
Guardians Inc.
All other trademarks and copyrights are the property of their respective
owners.
Safety Instruction
Please check the manual before use.
Do not keep magnetic-sensitive products close./The product may break down.
Children should explain their usage before use./Injury may occur.
Do not place anything on top of the product when not In use./Fire may occur.
Do not use at temperatures below -20 degrees Celsius and above 40 degrees
Celsius/It may cause malfunction and fire.
Do not expose the product to direct sunlight./Overheating and fire may occur.
Please use normal products and charge./It may cause malfunction
Do not exceed the rated value when using the product./There Is a risk of fire.
Do not damage the product/Continued use of the product may cause fire,
electric shock, or overheating.
Do not charge more than three batteries at the same time./Overheating may
occur. Do not charge with foreign substances In contact with the
product./Overheating and fire may occur.
Cation
Failure to comply with safety cautions and regulations can cause injury or
property damage
Turn off your device in potentially explosive environments instead of removing
the battery.
Always comply with regulations, instructions, and signs In potentially
explosive environments.
Do not use your device at refueling points (petrol stations), near fuels or
chemicals, or in blasting areas.
Do not store or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or accessories.
Warning
Failure to comply with safety warnings and regulations can cause serious injury or death
Do not use your device outdoor during a thunderstorm
Doing so may result in electric shock or device malfunction.
Do not drop or cause an impact to the charger or the device
Handle and dispose of the device and charger with care
Never dispose of the battery or device in a fire.
Never place the battery or device on or in heating devices, such as microwave
ovens, stoves, or radiators.
The device may explode when overheated.
Follow all local regulations when disposing of used batteries or devices.
Never crush or puncture the device.
Avoid exposing the device to high external pressure, which can lead to an
internal short circuit and overheating. Avoid exposing your device and battery
to very cold or very hot temperatures.
Extreme temperatures can damage the device and reduce the charging capacity
and life of your device and battery.
Do not bite or suck the device or the battery
Doing so may damage the device or result in an explosion or fire.
Children or animals can choke on small parts.
If children use the device, make sure that they use the device properly.
Do not insert the device or supplied accessories into the eyes, ears, or mouth
Doing so may cause suffocation or serious injuries.
The device contains magnets. The American Heart Association (US) and the
Medicines and Healthcare Products Regulatory Agency (UK) both warn that
magnets can affect the operation of implanted pacemakers, cardioverters,
defibrillators, insulin pumps, or other electromedical devices (collectively,
“Medical Device”) within the range of 15 cm (6 inches). If you are a user of
any of these Medical Devices, DO NOT USE THIS DEVICE UNLESS YOU HAVE CONSULTED
WITH YOUR PHYSICIAN
**** To use the charger on the go, use the enclosed cover case.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.