tuya E96K Smart Wireless Cube Camera User Guide
- June 6, 2024
- Tuya
Table of Contents
tuya E96K Smart Wireless Cube Camera
Welcome
Thank you for choosing our smart camera. Getting started is easy.
What’s Included
Product Details
Connection Preparation
Bring the camera and phone within 1 to 3 feet (30 to 100 centimeters) of the
router.
Note: Make sure smart phone is connected with your wireless router.
Please note the camera is only working under 2.4G Wi-Fi, not support 5G Wi-Fi.
Get the APP and Account
For the best experience, please download the “Tuya Smart” APP to your smartphone from App Store or Google Play, or you can also scan the QR code below, the APP icon will be displayed after installed successfully.
Launch the app from your smartphone and click the Sign Up button. Follow the on-screen instructions.
Insert the Micro SD card
Insert the Micro SD card gently on the side edge of camera.
Connect the power to the camera
Connect the power to the camera by DC5V/1A Micro USB Power Adapter.
Set up your camera
- Use the Reset Needle to press the reset button of camera above 5 seconds, then release the button, a red LED on the front of camera will blink quickly.
- Follow App’s instructions to complete network pairing process, the device will connect to your Wi-Fi network successfully.
- The blue light is on, camera is ready for viewing.
Place or Mount Your Camera
You can place your camera on a shelf or other flat surface, or you can mount it to the wall.
To mount your camera to the wall:
You can use 3M sticker to mount the camera on the wall.
You’re done!
Congratulations! Your camera is set up and ready to go.
Appendix Camera LED Guide
| NO. LED Status | Camera Status |
|---|---|
| 1 Red LED on | System starting up |
| 2 Red LED blinks quickly | Standby for configuration |
| 3 Blue LED blinks quickly | Network pairing |
| 4 Blue LED on | Camera online |
| 5 Red LED blinks slowly | OTA upgrade |
All trademarks are used for reference purposes only. Thanks again for choosing
our smart camera! Make
life safe in your hands!
Boost security mobility in your smartphone!
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>