Zhongshan City Richsound Electronic Industrial TB285SW 3.1Channel Dolby Atmos Soundbar Instruction Manual

Zhongshan City Richsound Electronic Industrial TB285SW 3.1Channel Dolby

Atmos Soundbar

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to the person. the poInt with in an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safety

1.  Read these instructions – All the safety and operating instructions should be read before this product is operated.
2.  Keep these instructions – The safety and operating instructions should be retained for future reference.
3.  Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4.  Follow all instructions – All operating and usage instructions should be followed.
5.  Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11.  Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.  Unplug the apparatus during lightning storms or when unused for long periods of time.
14.  Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to the electrical earth.
16.  The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
17.  The minimum distance around the apparatus for sufficient ventilation is 5cm.
18.  The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,table-cloths, curtains, etc…
19.  No naked flame sources, such as lighted candles, should be placed on the apparatus.
20.  Batteries should be recycled or disposed of as per state and local guidelines.
21.  The use of apparatus in moderate or tropical climates.

Caution:

•  Use of controls or adjustments or performance of procedures other than those described herein may result in hazardous radiation exposure or other unsafe operation.
•  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
•  The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning

•  The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
•  Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
•  Do not place this unit close to strong magnetic fields.
•  Do not place this unit on the amplifier or receiver.
•  If any solid object or liquid falls into the system, unplug the system and have it checked by qualified personnel before operating it any further.
•  Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth.
•  When removing the power plug from the wall outlet, always pull directly on the plug, never yank on the cord.
•  Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment.
•  The rating label is pasted on the bottom or back of the equipment.

Battery usage CAUTION
To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus:

•  Install all batteries correctly, + and – as marked on the apparatus.
•  Do not mix old and new batteries.
•  Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
•  Remove batteries when the unit is not used for a long time.

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
We hereby declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

FCC INFORMATION：

NOTE : This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a connected.
• Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

IC-Canada: CAN ICES-3(B)/NMB-3(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1.  This device may not cause interference.
2.  This device must accept any interference, including interference that may cause undesired operation of the device.

FCC & IC Warning: 

• approved by the party responsible for compliance could void the user’s authority to operate the equipment.
•  This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

What’s in the Box

Design and specifications are subject to change without notice.

Identifying the Parts

Main Unit

1. Remote Control Sensor
   Receive signal from the remote control.

2. Display Window
   Show the current status.

3. Wall bracket screws
   
   

4. (ON/OFF) button
   Switch the unit between ON and Standby mode.

5. (SOURCE) button
   Select the play function.

6. VOL+/VOL- buttons
   Increase/decrease the volume level

7. AC~ Socket

8. COAXIAL Socket

9. OPTICAL Socket

10. USB Socket
    Insert the USB device to play music.

11. AUX Socket
    Connect to an external audio device.

12. HDMI OUT (eARC/ARC) Socket Connect to a TV via HDMI cable.

13. HDMI IN (1/2) Sockets Connect to a TV via HDMI cable.

Wireless Subwoofer

1. AC ~ Socket Connect to power.

2. PAIR button
   Press activate the pairing function b e t we e n t h e ma i n u n i t a n d t h e subwoofer.

3. PAIR Indicator
   Light up solidly when the pairing succeed

Remote Control

1.   POWER BUTTON: Switch the unit between ON and STANDBY mode.
2. SOURCE buttons: Select the play function.
3. PAUSE: Skip to previous/next track in Bluetooth/USB mode
4. RESUME: Play/pause/resume playback in Bluetooth/USB mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device
5. BASS+/- Adjust bass level.
6. TREBLE +/ Adjust treble level.
7. – (MUTE) Mute or resume the sound.
8. +/- (vol): Increase/decrease the volume level.
9. VERTICAL/SURROUND: Adjust the surround ON/OFF.
10. EQ buttons: Select Equalizer (EQ) Effect.
11.   DIMMER: Adjust display brightness.

 Preparations

Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.

•  Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
•  If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.

Replace the Remote Control Battery

1. Press and slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.
3. Close the battery compartment cover.

Precautions Concerning Batteries

•  Be sure to insert the batteries with correct positive “” and negative “” polarities.
•  Use batteries of the same type. Never use different types of batteries together.
•  Either rechargeable or non-rechargeable b a t t e r i e s c a n b e u s e d . R e f e r t o t h e precautions on their labels.
•  Be aware of your fingernails when removing the battery cover and the battery.
•  Do not drop the remote control.
•  Do not allow anything to impact the remote control.
•  Do not spill water or any liquid on the remote control.
•  Do not place the remote control on a wet object.
•  Do not place the remote control under direct sunlight or near sources of excessive heat.
•  Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.
•  Do not use any batteries other than those specified.
•  Do not mix new batteries with old ones.
•  Never recharge a batter y unless it is confirmed to be a rechargeable type.

 Placement and Mounting

Placement

1. If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centered with the TV screen.
2. If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.

Wall Mounting (if using option-B)

• Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the unit   and wall brackets.
•  Additional tools (not included) are required for the installation.
•  Do not overtighten screws.
•  Keep this instruction manual for future reference.
•  Use an electronic stud finder to check the wall type before drilling and mounting.

1.  Drill 4 parallel holes (Ø 5.5-6 mm each according to wall type) in the wall. The distance between the holes should be 870 mm.
2.  Firmly fix 1 dowel into each hole in the wall if necessary. Tighten the wall mount brackets on the wall with screws and screwdriver (not included). Make sure that they are securely installed.
3.  Remove the screws at the back of the unit. Install the wall mounting screws into the back of the unit.
4.  Lift the unit onto the wall mount brackets and slot into place.

 Connections

Dolby Atmos®
Dolby Atmos gives you amazing experience you have never before by overhead sound, and all the richness, clarity, and power of Dolby sound.

For using Dolby Atmos®
Dolby Atmos® is available only in HDMI mode. For the details of the connection, please refer to “HDMI Connection”.

1.  To use Dolby Atmos® in HDMI 1 / HDMI 2 / HDMI ARC mode, your TV has to support Dolby Atmos®.
2.  Make sure that “No Encoding“ is selected for bitstream in the audio output of the connected external device (e.g. Blu-ray DVD player, TV etc.).
3.  While entering Dolby Atmos / Dolby Digital /PCM format, the soundbar will show DOLBY ATMOS / DOLBY AUDIO / PCM AUDIO.

HDMI Connection
Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For further setup details on HDR display, please refer to the instruction manual of your TV.

Method 1: ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to your soundbar through a single HDMI connection. To enjoy the ARC function, please ensure your TV is both HDMI-CEC and ARC compliant and set up accordingly. When correctly set up, you can use your TV remote control to adjust the volume output (VOL +/- and MUTE) of the sound bar.

•  Connect the HDMI cable from unit’s HDMI OUT (eARC/ARC) socket to the HDMI (ARC) socket on your ARC compliant TV. Then press the remote control to select HDMI (eARC/ARC) .

Tips:

•  Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On.
•  The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, please refer to the owner’s manual.

Method 2: Standard HDMI

•  If your T V is not HDMI ARC-compliant,connect your soundbar to the TV through a standard HDMI connection.

1.  Use an HDMI cable to connect the soundbar’s HDMI OUT (eARC/ARC) socket to the TV’s HDMI IN socket.
2.  Use an HDMI cable to connect the soundbar’s HDMI IN (1 or 2) socket to your external devices (e.g. games consoles, DVD players and blu ray).

Use the OPTICAL Socket

•  Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not included) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit.

Use the COAXIAL Socket

• You also can use the COAXIAL cable (not included) to connect the TV’s COAXIAL OUT socket and COAXIAL socket on the unit. Tip: The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the input source device for its audio setting details) with HDMI / OPTICAl / COAXIAL input.

Use the AUX Socket

•  Use a RCA to 3.5mm audio cable (included) to connect the TV’s audio output sockets to the AUX socket on the unit.

•  Use a 3.5mm to 3.5mm audio cable (included) to connect the TV’s or external audio device headphone socket to the AUX socket on the unit.

Connect Power

•  Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
• Before connecting the AC power cord, ensure you have completed all other connections.
•  Soundbar Connect the mains cable to the AC~ Socket of the main unit and then into a mains socket.
• Subwoofer Connect the mains cable to the AC~ Socket of the Subwoofer and then into a mains socket.

Pairing the Wireless Subwoofer with the Main Unit

Automatic pairing
The subwoofer and soundbar will automatically pair when both units are plugged into the mains sockets and turned on. No cable is needed for connecting the two units.

•  When the subwoofer is pairing with the main unit, the Pair Indicator will flash fast.
•  When the subwoofer is paired with the main unit, the Pair Indicator will light up.

NOTE:

•  Do not press the Pair button on the rear of the subwoofer, except for manual pairing.
•  If the automatic pairing fails, pair the subwoofer with the main unit manually.

Manual pairing

1.  Ensure that all the cables are well connected and the main unit is in Standby mode.
2.  Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will enter the pairing mode and the Pair Indicator will blink quickly.
3.  Press the button on the main unit or on the remote control to switch the main unit on.
4.  After the wireless connection succeeded, the Pair Indicator will light up.
5.  If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer and then reconnect the main cable after 4 minutes. Repeat steps 1 ~ 4.

NOTE:

•  If the wireless connection fails again, check if there is a conflict or strong interference
  (for example, interference from an electronic device) around your location. Remove these conflicts or strong interferences and repeat the above procedures.

•  The subwoofer should be within 6m (18 feet) of the soundbar in an open area.

•  If a TV or an external device is connected, the main unit AUX model and the subwoofer will switch on automatically when the TV or the external device is switched on.

•  If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator will flash. Follow steps 1 ~ 4 above to pair the subwoofer to the main unit.

Basic Operation

Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.

• Press the button on the unit or on the remote control to switch the unit ON.
• Press the button again to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
• If a TV or an external device is connected, the unit will switch on automatically when the TV or the external device is switched on.

Automatic Power Off Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected, switched off or the volume is too close to mute.

•  To switch the unit off completely, remove the main plug from the main socket.
•  Please turn the unit off completely to save energy when not in use.

Select Modes
Press the (SOURCE) button on the unit or the AUX, BT, OPT/COA, HDMI 1/2, HDMI eARC and USB and buttons on the remote control to select the desired mode. The selected mode will show on the display.

Adjust the Bass/Treble Level

•  Press the BASS +/- buttons on the remote control to adjust bass level.
•  Press the TREBLE +/- buttons on the remote control to adjust bass level.

Turn the Surround Sound ON/OFF

• Press the VERTICAL/SURROUND button on the remote control to turn on the surround sound. Press this button again to turn off the surround sound.

Select Equalizer (EQ) Effect
Press the VOICE / SPORT / MOVIE / MUSIC buttons on the remote control to select your desired preset equalizer effects.

Adjust the Volume

•  Press the + / – (VOL) buttons on the unit or on the remote control to adjust the volume.
•  If you wish to turn the sound off, press the (MUTE) button on the remote control. Press the (MUTE) button again or press the + / – (VOL) buttons on the unit or on the remote control to resume normal listening.

Adjust the Brightness

•  Press the DIMMER button on the remote control to select the brightness level.

AUX / OPTICAL / COAXIAL /HDMI Operation

1. Ensure that the unit is connected to the TV or audio device.
2. Press the button repeatedly on the unit or the AUX, OPT/COA, HDMI 1/2, HDMI eARC buttons on the remote control to select the desired mode. The selected mode will show on the display.
3. Operate your audio device directly for playback features.
4. Press the VOL +/– button to adjust the volume to your desired level.

Tip:

•  The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the input source device for its audio setting details) with HDMI 1 /HDMI 2 / HDMI ARC / OPTICAl / COAXIAL input.
•  When the DOLBY DIGITAL audio format is entered, the Soundbar display shows DOLBY AUDIO.
•  When the PCM audio format is entered, the Soundbar display shows PCM AUDIO.
•  When entering non-PCM or DOLBY DIGITAL audio formats, if there’s no sound output from the unit and the display show NO SUPPORT.
•  The full Dolby Atmos experience is only available when the Soundbar is connected to the source via a HDMI 2.0 cable.
•  The Soundbar will still function when connected via other methods (such as a Digital Optical cable) but these are unable to support all of the Dolby features. Given this, our recommendation is to connect via HDMI, in order to ensure full Dolby support.

Bluetooth Operation

Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to this player, you need to pair your device to this player.

Note:

•  The operational range between this player and a Bluetooth device is approximately 8 meters (without any object between the Bluetooth device and the unit).
•  Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
•  Compatibility with all Bluetooth devices is not guaranteed.
•  Any obstacle between this unit and a Bluetooth device can reduce the operational range.
•  If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode automatically.
• During ON mode, press the button repeatedly on the unit or the SOURCE button on the remote control to select Bluetooth mode. “NO BT” will show on the display if the unit is not paired to any Bluetooth device.
• Activate your Bluetooth device and select the search mode. “RSR TB600W3” will appear on the device list.
• If you cannot find the unit, press and hold the or BT button on the remote control to be searchable. The display will show “PAIR” and you will hear “Pairing” from the unit. Select “RSR
• TB600W3” in the pairing list. successful pairing, you will hear from the unit, and the display panel “BT”. Play music from the connected Bluetooth device.

To disconnect the Bluetooth function, you can :

•  Switch to another function on the unit.
•  Disable the function from your Bluetooth d e v I c e. The B l u e t o o t h d e v I c e w i l l b e disconnected from the unit af ter the “Disconnected” voice prompt.
• – Press and hold the or BT button on the remote control.

Tips:

•  Enter “0000” for the password if necessary.
•  If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous connection.
•  The player will also be disconnected when your device is moved beyond the operational range.
•  If you want to reconnect your device to this player, place it within the operational range.
•  If the device is move beyond the operational range, when it is brought back, please check if the device is still connected to the player.
•  If the connection is lost , follow t h e instructions above to pair your device to the player again.

Listen to Music from Bluetooth Device

•  If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the player.
•  If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player’s remote control to play music stored on the device.

1.  Pair your device with the player.
2.  Play music via your device (if it supports A2DP).
3.  Use supplied remote control to control play (if it supports AVRCP).

• – To pause/resume play, press the button on the remote control.
• To skip to a track, press the buttons on the remote control.

USB Operation

Insert the USB device.

1. Press the button repeatedly on the unit or press the SOURCE button on the remote control to select USB mode.
2. During playback:

• To pause or resume play, press the on the remote control.
•  To skip to the previous/next file, press the buttons on the remote control.

Tips:

•  The unit can support USB devices with up to 32 GB of memory.
•  This unit can play MP3 only.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service.

No power| •      Ensure that the AC cord of the apparatus is properly connected .

•      Ensure that there is power at the AC outlet.

•      Press      (standby) button to turn the unit on.

---|---
Remote control does not work| •      Before you press any playback control button, first select the correct source.

•      Reduce the distance between the remote control and the unit.

•      Insert the battery with its polarities (+/-) aligned as indicated.

•      Replace the battery.

•      Aim the remote control directly at the sensor on the front of the unit.

No sound| •      Make sure that the unit is not muted. Press MUTE or VOL+/VOL– button to resume normal listening.

•      Press      button on the unit or on the remote control to switch the soundbar to standby mode. Then press the      button again to switch the soundbar on.

•      Unplug both the soundbar and the subwoofer from the mains socket, then plug them again. Switch on the soundbar.

•      Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital mode while using digital (e.g. HDMI, OPTICAL, COAXIAL) connection.

•      The subwoofer is out of range, please move the subwoofer closer to the soundbar. Make sure the subwoofer is within 5 m of the soundbar (the closer the better).

•      The soundbar may have lost connection with the subwoofer. Re-pair the units by following the steps on the section “Pairing the Wireless Subwoofer with the Soundbar”.

•      The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect.device is not muted.

TV has display problem while viewing HDR content from HDMI source.| • Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For further setup details on HDR display, please refer to the instruction manual of your TV.
I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing| •      Ensure the Bluetooth function is activated on your Bluetooth device.

•      Ensure you have paired the unit with your Bluetooth device.

This is a 15 mins power off function, one of the ERPII standard requirement for saving power| •      When the unit’s external input signal level is too low, the unit will be turned off automatically in 15 minutes. Please increase the volume level of your external device.
The subwoofer is idle or the indicator of subwoofer do not light up.| • Please unplug power cord from the mains sockect, and plug it in again after 4 minutes to resent the subwoofer.

Specifications

USB

| 5V       0.5A

Hi-Speed USB (2.0) 32G (max) , MP3

Audio input sensitivity| 500mV
Frequency Response| 120Hz – 20KHz
Dimension (WxHxD)| 950 x 71 x 112
Net weight| 2.85 kg

Bluetooth / Wireless specification

Subwoofer

Amplifier (RMS Output Power)

Remote Control

References

• RSR | RichSoundResearch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>