RND Single Channle Remote Control Syntax 20-KA Series User Guide

June 7, 2024
RND

RND 320-KA Series single Channel Remote Control Syntax V3.0

Command format: VSET:

  1. VSET: Command header
  2. X: output channel
  3. separator
  4. NR2: parameter
Command Details:
  1. ISET :
    Description: Sets the output current.
    Example: ISET1 :2.225
    Sets the CH 1 output current to 2.225A

  2. ISET ?
    Description: Returns the output current setting.
    Example: ISET1?
    Returns the CH 1 output current setting

  3. VSET :
    Description: Sets the output voltage. Example:
    VSET1:20.50
    Sets the CH 1 voltage to 20.S0V

  4. VSET ?
    Description: Returns the output voltage setting.
    Example: VSET1?
    Returns the CH1 voltage setting.

  5. IOUT ?
    Description: Returns the actual output current.
    Example: IOUT1?
    Returns the CH1 output current

  6. VOUT ?
    Description: Returns the actual output voltage.
    Example: VOUT1?
    Returns the CH 1 output voltage

  7. BEEP
    Description: Turns on or off the beep. Boolean: boolean logic.
    Example: BEEP1 Turns on the beep.

  8. OUT
    Description: Turns on-off the output.
    Boolean: 0 OFF, 1 ON
    Example: OUT1 Turns on the output

  9. STATUS?
    Description: Returns the POWER SUPPLY status.
    Contents 8 bits in the following format
    Bit Item Description
    0 When output is ON,0=CC mode, 1 =CVmode
    4 Beep 0=Off, 1 =On
    5 OCP 0=Off, 1 =On
    6 Output 0=Off, 1 =On
    7 OVP 0=Off, 1 =On

  10. * IDN?*
    Description: Returns the RND 320-KA3005P identification.
    Example
    IDN?**
    Contents RND 320-KA3005P V1 .3 (Manufacturer, model name,).

  11. RCL
    Description: Recalls a panel setting.
    NR 1 1-5: Memory numbers 1 to 5
    Example RCL 1 Recalls the panel setting stored in memory number1

  12. SAV
    Description: Stores the panel setting.
    NR 1 1-5: Memory numbers 1 to 5
    Example SAV1 Stores the panel setting stored in memory number1

  13. OCP < Boolean >
    Description: Stores the panel setting.
    Boolean: 0 OFF, 1 ON
    Example: OCP1 Turns on the OCP

  14. OVP < Boolean >
    Description: Turns on the OVP.
    Boolean: 0 OFF, 1 ON
    Example: OVP1 Turns on the OVP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals