renkforce 2867337 LED Table Lamp Instruction Manual
- June 14, 2024
- renkforce
Table of Contents
renkforce 2867337 LED Table Lamp
Product Information
Specifications
- Product: LED Table Lamp, Dimmable
- Item Number: 2867337
- Delivery Contents: Product, Power adaptor (1.8 m), Operating instructions
Description of Symbols
The following symbols are on the product/appliance or are used in the text:
- The symbol warns of hazards that can lead to personal injury.
- This product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
- This product is constructed according to protection class III.
- Read the operating instructions carefully.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications, and repairs must only be completed by a technician or an authorized repair center.
Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
Operating Environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
Operation
Consult an expert when in doubt about the operation, safety or connection of
the product.
Power Adapter
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
- Connect the appliance to a wall socket that can be accessed easily.
- As power supply, only use the supplied mains adaptor.
- Only connect the power adaptor to a normal mains socket connected to the public supply.
LED Light
Do not look directly into the LED light! Do not look into the beam directly or
with optical instruments!
Product Usage Instructions
- Connection
Connect one end of the power adaptor to the DC 12V input on the product and the other end to a suitable power supply.
FAQ
-
Where can I download the latest operating instructions?
You can download the latest operating instructions from www.conrad.com/downloads or scan the QR code shown in the manual. -
What should I do if I have questions or need technical support?
If you have any questions or need technical support, please contact our technical support service or other technical personnel.
Intended use
- The product is an LED table lamp with adjustable brightness level.
- The product is intended for indoor use only.
- Do not use it outdoors.
- Contact with moisture must be avoided under all circumstances.
- If you use the product for purposes other than those described, the product may be damaged.
- Improper use can result in short circuits, fires, or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the operating instructions carefully and store them in a safe place.
- Make this product available to third parties only together with the operating instructions.
- All company names and product names are trademarks of their respective owners.
- All rights reserved.
Delivery contents
- Product
- Power adaptor (1.8 m)
- Operating instructions
Operating instructions
Download the latest operating instructions from
www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Power adapter
Do not modify or repair mains supply components including mains plugs, mains cables, and power supplies. Do not use damaged components. Risk of death by electric shock!
- Connect the appliance to a wall socket that can be accessed easily.
- As power supply, only use the supplied mains adaptor.
- Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.
- Never connect or disconnect power adaptors if your hands are wet.
- Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on the plug.
- For safety reasons, disconnect the power adaptor from the mains socket during storms.
- Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
- Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
- Unplug the power adapter from the mains socket.
- Use a new power adapter of the same design. Do not use the damaged adapter again.
- Ensure that cables are not pinched, kinked or damaged by sharp edges.
- Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
LED light
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
Connection
Connect one end of the power adaptor to the DC 12V input on the product and
the other end to a suitable power supply.
Operation
Touch the button to change brightness levels and switch the light ON/OFF.
Cleaning
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Disconnect the product from the power supply.
- Let the product cool down to ambient temperature.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
General
This product contains a light source of energy efficiency class E.
- Input ……………………………………….. 12 V/DC 0.5 A, 5 W ø3.0 mm (inner) / ø6.5 mm (outer)
- Power consumption …………………… 4.3 W
- Energy consumption ………………….. 5 kWh/1000 h
- Energy efficiency ………………………. 125 lm/W
- Protection class ………………………… III
- LED
- Quantity: 30 pcs
- Lifespan: 25,000 hrs
- Colour temperature ……………………. 3000 K
- Colour rendering index (CRI) ………. ≥80
- Brightness ………………………………… max. 580 lm
- Operating conditions ………………….. -20 to + 40 °C, 20 – 80 % RH (non-condensing)
- Storage conditions …………………….. -20 to + 50 °C, 20 – 80 % RH (non-condensing)
- Dimensions (ø x H) ……………………. ø140 x 350 mm
Power adaptor
- Input ……………………………………….. 220 – 240 V/AC, 50/60 Hz 0.3 A max.
- Output ……………………………………… 12 V/DC 0.5 A, 6 W
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com). All rights including
translation reserved. Reproduction by any method (e.g. photocopying,
microfilming or the capture in electronic data processing systems) requires
prior written approval from the editor. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of
printing.
Copyright by Conrad Electronic SE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>