NOBLE Falcon Pro True Wireless Earphones Instruction Manual

NOBLE Falcon Pro True Wireless Earphones

Thanks for purchasing NOBLE Falcon Pro Bluetooth 5.2 True Wireless Earbuds. Please read this instruction manual carefully before using your new Falcon Pro Earbuds.

Packing List

Product Overview

POWER ON

The earbuds will power on automatically when removed from the charging case if the earbuds have been sufficiently charged. A white indicator LED will bling for one second to indicate a “power on” state.

How to Pair

Pairing Procedure

The first time you use your earbuds with your smartphone, you will need to pair them with your smartphone. Once paired, they will connect automatically each time they are booted up. Pairing

1. Remove your two earbuds from the charging case. They will power on automatically and will enter pairing mode, with orange a,d white indicator lights flashing alternately.
2. Enable Bluetooth on your smartphone, and search for … NOBLE Falcon Pro” in available Bluetooth devices. Once found, click “NOBLE Falcon Pro to initiate the pairing.
3. After pairing, the connect interface of the second earbud should appear on your smartphone. Click it to confirm and all settings will be completed.

Pairing a new device: Repeat the above steps

Button Operation

RESET

HEAR-THROUGH FUNCTION

• Take the earbuds out of the case and double-tap the Tap sensor to activate the hear-through mode.
• Please make sure that the earbuds are on standby, whether connected or disconnected to the device.
• Note that hear-through mode cannot be activated when music is playing or during a call. Please pause any music or terminate any calls prior to activating the hear-through function.

SINGEL EARBUDS USAGE

1. Please note that both earbuds can be used in mono mode. Remove the desired earbud from the charging case to switch it on.
2. The selected earbud will automatically enter the connection mode indicated by white LED flashes.
3. Turn on Bluetooth on your device and search for Noble Falcon Pro to connect.

Notes:
To switch to stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, thus enabling stereo usage. You cannot skip tracks or return to the previous tracks in mono mode.

THE LED INDICATOR FOR FALCON PRO

Charging

Battery Indicator:

Declarations and Warning

• Declarations and Warnings Disconnect previous devices before pairing a new device.

• WARNING! Long-term exposure to high noise volumes may cause permanent hearing loss.

• Do not use the NOBLE Falcon earbuds in locations prohibiting the use of electronic equipment.

• Consult your physician prior to using your NOBLE Falcon earbuds if you have a pacemaker or other electrical medical device.
  , This package contains small parts, which may pose a hazard to small children.

• Do not disassemble the NOBLE Falcon as it contains lithium batteries, and disassembly could result in electric shock or fire, or serious injury.

• Any disassembly of the NOBLE Falcon, or attempt to replace or repair the NOBLE Falcon by an unauthorized person, will void the NOBLE Falcon’s warranty.

• This product is not designed for use in water, keep the product away from water and liquids. Failure to do so may cause

Qualcomm aptX Adaptive & Qualcomm aptX
Qualcomm aptX and Qualcomm cVc are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX and cVc are trademarks of Qualcomm Technologies International, Ltd., registered in the United States and other countries. Qualcomm aptX and Qualcomm TrueWireless are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered in the United States and other countries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>