SMITH NOBLE CWF0001B2 Smart Hub User Manual
- June 5, 2024
- SMITH NOBLE
Table of Contents
SMITH NOBLE CWF0001B2 Smart Hub
Instructions
- To ensure safety, please read this manual carefully before installation and follow the instructions herein.
- Prior to installation, make Sure that the power outlet of the place you are installing the device follows the instruction indicated on the device’s label.
- Sensitive to humidity! The device must not come in Contact With liquids or be exposed to excessive moisture environments.
- Fragile. Handle the device carefully, avoid impacts.
- Recyclable product. Dispose appropriately in the proper facilities.
This is a free manual and part of the product, thus, it cannot be sold separately, copied or duplicated without the prior written permission of Smith
- Noble Home, Inc.
INTRODUCTION
The Smith & Nobel Smart Hub is the main device of the Smith & Nobel Smart Shades Platform. This system was created to integrate motorized window treatments via APP, voice control, keypads and more.
SAFETY AND RESPONSIBILITY
lease read this guide carefully before installing and using the product
FUNCTIONALITY
- Smith &Nobel Motors Control;
- Create and Customize Scenes;
- Remote ACCESS,
- Scheduling Feature
- 32 Virtual Remotes Control
TECHNICAL INFORMATION
- Input Voltage: 5vdc/50-60 Hz;
- Communication: RF Commands;
- Radio Frequency: 433,92 Mhz
- RF SIgnal Range: 80 t
- Storing Temperature Range: 0C to +50 C;
- Humidity: +5% to 95% non-condensing
- W-Fi network communication (2.4 Ghz)
HOW To INSTALL
- download the APP on your smartphone
- When the A and the following message wo notifications Click on”Allow to receive importantly CICk On AlOW 1o receve mportant notifications. Click on “start.
- Type a user name and password, than press Enter
- Click on the “*icon (Add Devices) located in the upper nght part of the APP SCreen. The APP Will ask permission to have access to the camera,
- Click on OK and scan the QR code (located underneath the Hub)
- Plug your Hub to the power outlet
- The hub’s LED will star blinking. Follow the APP instructions.
ADDING AND PAIRING RF MOTORS
- Click on the “” icon (Add Devices); Select Other” and “Add Shades” You will be able to name the device according to your preference and also to choose the kind of motor and shade you want. nice you complete the related selection, click on OK and the device will de added and listed among your list or
- To pair the motor with the Hub, set the motor tO the programming mode, then access the channel you want on the APP, click on “Edit” and then click on Program. The motor should indicate that the pairing was successful and the APP will be controlling the motor
- You can add up to 32 virtual remotes control per Hub. To other motors repeat the same process.
IMPORTI EXPORT SETTINGS
EXPORT your settings to another the “Settings Menu”, then “Export Settings”.
Choose the exporting mode (Admin or User) and send the Config File via email.
To IMPORT the settings on another mobile device, Download the APP, Start the
APP and type your name and email. Open the email which contains the Config
File attached to it. Download the file and open it using the Smith and Noble
APP le, access
FACTORY RESET
If you need to factory reset the Hub for any reason, press and hold the reset button located on the back part of it. The LED will start blinking. Hold the reset button pressed until the LED becomes red and solid (approximately 40s), then release the reset button. The Hub will be reset after 2 min and all the configurations will be lost.
Periodic transmissions at regular predetermined intervals are not permitted
.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>