NOBLE FoKus H-ANC True Wireless Stereo Earbuds User Guide
- June 5, 2024
- Noble
Table of Contents
NOBLE FoKus H-ANC True Wireless Stereo Earbuds
Product Overview
Charging case
EARBUDS
Accessories
How to pair
The Noble FoKus H-ANC will need to be paired to your device before use. Once paired, they will connect automatically each time they are activated.
Open the lid of the charging case, remove the earbuds from the charging case The earbuds will power on automatically and enter pairing mode, with blue and white indicator lights flashing alternately.Enable Bluetooth on your smartphone and search for NOBLE FoKus H-ANC” in available Bluetooth devices. Once found, select “NOBLE FoKus H-ANC” to initiate pairing. You will hear voice prompt “PAIRING COMPLETE”, now the earphones are ready to use.
Reset
If pairing does not work properly or the operation is unstable, please try to reset the earbuds. To do so, please open the lid, press and hold the reset button of the charging case for 10 seconds when the earbuds are on the case, until charging case white indicator LED1 and LED3 flash.
Hear-through & ANC function In standby mode or when playing music
- First time to use the earbud, default state is ANC OFF
- Press and hold the left earbud touch sensor for 3 seconds with voice prompt “AMBIENT MODE”, it will activate the external sound capturing function.
- Press and hold the left earbud touch sensor for 3 seconds with voice prompt •wind noise reduction”, it will activate the active noise cancellation for wind noise environment.
- Press and hold the left earbud touch sensor for 3 seconds with voice prompt “ANG ON”, it will activate the active noise cancellation.
- In a word, here is the loop for uAMBIENT MODE”, “Wind noise reduction”, “ANG ON”, “ANC OFF” by long pressing LEFT earbud for 3 seconds
FCC STATEMENT
This device complies with Part 15 of the CC Rules. Operation is subject to the following two conditions device may not cause harmful interference, and (2) This device must accept any interference received, inc|uding interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limiits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interterence in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ iv technician for help.