NOBLE Falcon 2 True Wireless Earbuds Instruction Manual

June 5, 2024
Noble

NOBLE Falcon 2 True Wireless Earbuds

Packing List

NOBLE Falcon 2 True Wireless Earbuds 1

  1. Noble Falcon earbuds x 1 pairs
  2. Instruction Manual x 1
  3. Ear tips x 3
  4. USB charging cable x 1
  5. Storage bag x1

Product Overview

NOBLE Falcon 2 True Wireless Earbuds 2

Power On

  • The earbuds will power on automaticaly when removed from the charging case, if the charging case has a sufficient charge. (The white indicator light will blink for one second indicate that the earbuds are in a “power on” state)NOBLE Falcon 2 True Wireless Earbuds 3
  • To manually turn the earbuds on, press the MFB button lightly to boot up.

Power Off

NOBLE Falcon 2 True Wireless Earbuds 6

  • To turn off the earbuds, press the MFB button for 3 seconds until you hear a “beep” sound twice.

  • If the charging case has a sufficient charge, the earbuds will automatically turn off when placed in the charging case.

How to Pair

Pairing Procedure

The first time you use your earbuds with your smartphone, you will need to pair them with your smartphone. Once paired, they will connect automatically each time they are booted up. Pairing

  •  Remove your two earbuds from the charging case. They will power on automatically and will enter pairing mode, with orange and white indicator lights flashing alternately.
  • Enable Bluetooth on your smartphone, and search for “NOBLE Falcon_LR” in available Bluetooth devices. Once found, click “NOBLE Falcon_LR” to initiate the pairing.
  •  After pairing, the connection interface of the second earbud should appear on your smartphone. Click it to confirm and all settings will be completed. Pairing a new device Repeat the above steps

Button Operation

Model Function L R

MUSIC

| Play| –| Single Click
Pause| –| Single Click
Next Track| –| Double Click
Previous Track| –| Three Click

Phone

| Answer Call| –| Single Click
Hang Up| –| Single Click or Put in Charging Case
Reject Call| –| Press 1 Second

Siri

| Enable| Press 1 Second
Disable| Press 1 Second

Volume

| Up  +| Three Click| –
Down –| Double Click| –

Charging

Battery Indicator:

NOBLE Falcon 2 True Wireless Earbuds 9

Case Charging Earbuds Charging
Charging White LED ON
Fully Charged All LED On

Declarations and Warning
Declarations and Warnings Disconnect previous devices before pairing a new device.
WARNING!

  • Long-term exposure to high noise volumes may cause permanent hearing loss.
  • Do not use the NOBLE Falcon earbuds in locations prohibiting the use of electronic equipment.
  • Consult your physician prior to using your NOBLE Falcon earbuds if you have a pacemaker or other electrical medical device.
  • This package contains small parts, which may pose a hazard to small children.
  • Any disassembly of the NOBLE Falcon, or attempt to replace or repair the NOBLE Falcon by an unauthorized person, will void the NOBLE Falcon’s warranty.
  •  This product is not designed for use in water, keep product away from water and liquids. Failure to do so may cause permanent damage to the product.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

  • this device may not cause harmful interference,
  •  this device must accept any interference received, including interference that may cause undesired operation

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Noble User Manuals

Related Manuals