H Koenig naty210 Plant Milk Maker Instruction Manual

naty210 Plant Milk Maker
Instruction Manual

https://www.hkoenig.com/s/24409_343318_machine-a-lait-vegetal

Important safety information

Please read this manual carefully before using the device for the first time and keep the manual.

1. Warning — When positioning the appliance, ensure the supply cord is not trapped or damaged.
2. Warning — Do not place any power strips or power generators in the immediate vicinity of the appliance.
3. Warning — Do not insert objects or your hand into the appliance while it is in operation

Intended use

The appliance is exclusively intended for the preparation of vegetable drinks made of grains, nuts, pits, seeds, legumes, or Fruit. Do not bill it with any other types of food, especially coffee.
Symbols
This symbol warns of hazards that can damage the appliance or cause injury.
This symbol warns of an electric shock that may because by a defective appliance or by improper handling. This product may only be opened for necessary service work by an authorized technician.

Safety information

WARNING: Never hold your hands under the spout as the beverage is being dispensed. The danger of scalding!
WARNING: Never remove the plug from the lid during preparation. The danger of scalding!
Do not immerse the appliance in water or any other liquid. Protect the power cable and mains plug from moisture.

• After unpacking the appliance, check that it is in perfect condition and has not sustained any damage that could impair its functional safety. Should you notice any defects or if the appliance has fallen on the floor, do not attempt to use it, but call our customer service.

• Improper repairs can lead to hazards for the user and the warranty may be deemed void. If individual parts are damaged, they must be replaced by the manufacturer, an authorized specialist company, or a similarly qualified person.

•  The appliance is exclusively intended for the preparation of vegetable drinks made of grains, nuts, pits, seeds, legumes or fruits. Do not fill it with any other types of food.

• Store the appliance out of the reach of children.

• Children under the age of 8 should be kept away from the appliance or be under constant supervision.

• This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.

• Children aged 8 and above or persons with reduced physical, sensory, or mental capabilities or lack of experience and/or knowledge should only switch on/off or use the appliance if it is in its intended, normal operation position, and if they are supervised or have been instructed on the safe use of the appliance and have understood the hazards involved. Children aged 8 and above should neither connect nor clean or service the appliance. The appliance is not a toy.
  Children should be supervised to ensure that they do not play with appliances.

• Position the appliance on a free and level surface.

• The appliance is only intended for use in the household or other similar uses such as:
  – In kitchenettes in shops, offices or other workplaces,
  – On farms,
  – For use by guests in accommodation establishments (hotels, motels), private guest houses, or holiday homes.

• Only use the appliance after proper assembly.

• The appliance may only be used with its original accessories and spare parts.

• The device may not be operated while standing in a cabinet.

• Never fill cold or hot liquids into the mixing chamber and only use ingredients at room temperature.

• Only fill the water with filtered water with a low

lime content, to protect your appliance and get the best possible taste.

•  Do not disconnect the appliance from the mains during preparation or the sell-cleaning program.
• Remove stones of Fruit before processing (e.g. nectarines, cherries, plums, and similar Fruit).
•  Do not Bill it with coffee beans or instant coffee!
• Allow the appliance to cool completely before cleaning.
• Connect the appliance only to alternating current as indicated on the type plate. Connect the mains plug only to an earthed socket.
• Uncoil the power cable completely before use.
• Disconnect the mains plug as soon as you have finished using the appliance. Do not pull on the power cable itself, as this might damage the cable.
• Switch off the machine before unplugging it.
• The appliance may not be operated with an external timer or remote-control system.
• Always disconnect the mains plug after use, before cleaning, or in the event of malfunctions during operation.
• The appliance is not suitable for dishwashers. The lid, plunger, collection tray, and glass jar can be cleaned in the dishwasher.
• Never place or use the appliance and power cable on or near a hot surface.
• The cable must not hang over the edge of the work surface.
• Do not use the appliance outdoors.
• This appliance may be used by children aged 8 years and over, provided they are supervised or instructed in the safe use of the appliance and understand the hazards involved.
• Cleaning and maintenance by the user should not be carried out by children unless they are over 8 years of age and under adult supervision.
• Keep the appliance and its cable out of the reach of children under 8 years of age.
• Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Before using the appliance for the first time

• Remove all transport safety and packaging parts and keep them away from children — the danger of suffocation!
•  The product should be cleaned before the first use and after prolonged periods of non-use. When doing so, follow our instructions on cleaning and maintenance.
• Place the appliance on a level and dry surface.
• Calibrate the device by holding the cleaning button. The program will take 5 minutes.

Product description

Display

Preparing a drink

1. Connect the appliance to the power supply.

2. Switch on Mila by tapping at the bottom center of the display. The display now lights up.
   

3. You can select the various programs using the “Program” button. just push the button several times.

4. Press the “Capacity” button multiple times to select the quantity. You can prepare 300 ml, 500 ml, 800 ml, or 1,000 ml. The device processes large quantities in two runs.
   Nevertheless, all ingredients are to be poured into the mixing chamber at the beginning.

5. Fill the water container with filtered water.

6. Pour all ingredients into the mixing chamber.

7. Press the “Start/Stop” button to start the program.

8. Press the “Start/Stop” button again during the first minute to stop the program.

9. It pours your drink into the glass jar. Warning: The drink and glass jar are very hot. Only hold the glass jar by the handle. At the end of preparation, you will hear a beep sound as the sell-cleaning mode starts. The display will show the following message “Self-clean”. It pours out the cleaning water into the collection container. The device beeps again when the sell-cleaning mode is completed.

Programs

Program| Description| Ingredients| Grams of ingredients / 100 ml
---|---|---|---
Dry soy/ Soaked soy| For dried or soaked soybeans and other legumes| Dried soybeans| 3
Soybeans soaked for 12 hours| 5
Nuts| For nuts, pits, and seeds| Almonds and hazelnuts (roasted, blanched, or natural)| 3 – 4
Cashews| 1 – 6
Shredded coconut”| 11
Lupine meal*| 4 – 6
Macadamia| 3 – 1
Grains| For grains and pseudo-grains| Rice**| 8
Oats and spelt (flakes. yields flakes or instant flakes| 1 – 2
Buckwheat| 8
Hulled hemp seeds| 6 – 8
Miller| 3 – 5
Fruit| For non-dairy milk with dates or other dried fruits or ripe bananas| Ripe banana|
Soft dried fruits such as dates of apricots’
Juice| For approx.. 500g of juice/fruit Nectar from berries and soft fruit,
Washed and pitted. Fill in a Maximum of 250g of fruit.| Banana
Berry fruit
Peach
Apricot
Nectarines

**max. preparation Quantity 300 ml
***washed and cooked

Time delay

You can pre-set the device to prepare the drink at a later time.

1. Just select the program and capacity

2. Press the “Timer” button. By pressing the button several times, you can increase the pre-set time in steps of 30 minutes, from 30 minutes up to a max. of 24 hours.
   The pre-set time is 8 hours. The program is then completed after 8 hours.

3. Select the program. For safety reasons, the “Soaked Soy” and “Juice”
   programs are not included.

4. Fill in the ingredients and press “Start/Stop”.

5. You can stop the program and delay the time by pressing the “Start/Stop” button again during the first minute. Now you can make a new selection.

Warning: If the room temperature exceeds 30°C, do not set the timer at over 12 hours to prevent germs.

Cleaning and care Cleaning

The device comes with one automatic and two manual self-cleaning modes. This makes cleaning a breeze.

1. After every program, Mila automatically switches on the self-cleaning mode. The cleaning takes 7 minutes. The device only needs water to clean herself. After the end of the self-cleaning process, open the lid to allow the mixing chamber to dry.

2. You can also directly select the cleaning mode via the display, for example after not using the device for a longer period of time, after preparing a sweet drink (with sugar, syrup, or fruit), or whether the appliance is due for a basic cleaning:
   – Select the cleaning mode and press “Start” to start the cleaning mode. It takes 3 minutes. After the end of the self-cleaning process, open the lid to allow the mixing chamber to dry.
   Press the cleaning button again to select the intensive cleaning mode. This program takes 8 minutes. It is recommended to run the intensive cleaning program regularly, even if the appliance is in constant use. Add a drop of mild detergent into the mixing chamber before the program starts. On first use, make sure that the detergent is not  too highly concentrated to prevent excessive foam from forming in the mixing chamber. If foam residues remain after the end of the program, flush out the appliance using the 3-minute flushing program. After the end of the self-cleaning process, open the lid to allow the mixing chamber to dry.

3. Open the lid and simply remove it in the vertical direction for easier cleaning by hand. You can also simply remove the plug. Do not clean the lid and plug in the dishwasher, to avoid damaging the seals.

4. Also regularly clean the metal pins protruding into the mixing chamber, the silicone valve through which the water flows into the mixing chamber, as well as the silicone spout with a damp cloth.

5. Regularly clean the water container to make sure it always stays hygienically clean.

6. Clean the housing with a damp and soft cloth and thoroughly dry afterwards.

Tips: should the blades be stained by ingredients, pour some water into the mixing chamber and add a denture-cleaning tablet. Leave it to stand for 1- 24 hours before running a short manual cleaning program.
Warning: If you wish to clean the blades by hand, switch off the device and remove the mains plug. Please pay attention and be careful, the blades are sharp.

Do not disconnect the power supply of the appliance during the cleaning program and do not interrupt the program.
Remove residues from the mixing chamber Please follow these steps if you wish to remove  any residues or unfinished milk left in the mixing chamber due to a power outage or for a different reason:

1. Connect the device to the power supply.
2. As soon as the display shows all symbols, you can have the rests fed out by holding the “Capacity” button.
3. Afterward, start a manual cleaning program using the “Cleaning” button.

Descaling
Treat your product with care and only use filtered water. You should additionally descale it regularly. We recommend descaling after every 50th preparation process, or whenever you clearly notice limescale on or in the machine. To descale, proceed as follows:

1. Add 3 tsp baking soda into the water container and fill it with water.
2. Start any program with 300 ml.
3. Stop the preparation as soon as the device starts pumping water into the mixing chamber (approx. 5-10 seconds) by removing the water tank and disconnecting your product from the power. Wait 1 hour.
4. Plug it again and allow the program to run to the end.
5. Afterward, run through two preparation programs without any ingredients using a quantity of 1 000ml each time. Repeat the process, if required. Now the device is good to go.

Replacement

If the blades get blunt after a period of use, you can replace them yourself. Only use original spare parts!
Attention! Exercise particular care when handling the blades, also if they are dull.
There is a risk of injury!!!

1. Ensure that it is not connected to the power supply

2. Use rugged tools such as a long screwdriver. Protect the base of the mixing chamber, e.g. by placing several layers of paper or a fitting piece of silicone underneath the blades, to prevent scratching the coating.

3. Position one tool on the back side of the blade and slightly tilt it with the blade exerting a bit of resistance.

4. Use the other tool to strike against the tilted tool above the mixing chamber to loosen the blade.

5. After loosening the blade, carefully remove it by turning it and inserting the new blade.

6. Carefully tighten the new blade by hand. Start a manual cleaning program using the “Cleaning” button. The blade fastens itself during the first use.

Trouble shooting

The device indicated problems using a signal beep and via the display.

If the device does not work properly, please check the following steps:

• Check if the manual was followed precisely and correctly
• Check the following table for possible reasons
• Check if all fuses are working

containers are closed and that the collection container had not spilled over.
The mixing chamber/blades are not clean after the automatic self-cleaning program| Add a drop of detergent and select the intensive cleaning mode
Gently wipe off by hand with a damp cloth
The beverage tastes sandy| Reduce the number of ingredients used to prepare your drink
Soak the ingredients before processing
The mixing result is chunky| Soak the ingredients and/or chop them before preparation
Filter out any chunks using a sieve
Replace the blades

Error codes

number of ingredients and clean the machine
0.00E+00| The temperature sensors are sticky or there are too many ingredients| Reduce the number of ingredients and clean the sensors inside of the mixing chamber
0.00E+00| The voltage is lower than 160 V or exceeds 260V| Please contact customer services
0.00E+00| Signal defect
0.00E+00
El 0| The discharge hose is jammed| Please clean
El 1| The temperature sensor is defective or damaged| Please contact customer services
0.00E+00
0.00E+00| The pass-through sensor is defective or damaged
0.00E+00| Electrical fault
0.00E+00| The heating unit of the mixing chamber is defective or damaged

ENVIRONMENT

CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05

References

• H.Koenig : Le spécialiste du petit électroménager
• HKOENIG SAV: Pezzi di ricambio, accessori, FAQ
• H.Koenig customer support
• HKOENIG SAV: Repuestos, accesorios, FAQ
• HKOENIG SAV: Pièces détachées ,accessoires, FAQ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>