kitchenAid KSM3300 Series Stand Mixer User Guide
- June 7, 2024
- KitchenAid
Table of Contents
kitchenAid KSM3300 Series Stand Mixer
GET READY
DISCOVER MORE
AT KITCHENAID.COM/QUICKSTART
For exciting recipes, demo videos, product registration, and more, our quick
start page has what you need to help you get the most from your new product.
KitchenAid.com | KitchenAid.ca | USA: 1.800.541.6390 | Canada: 1.800.807.6777
W11100321A KSM3300 Series 04/17
®/™ ©2017 KitchenAid. All rights reserved. KITCHENAID and the design of the
stand mixer are trademarks in the U.S. and elsewhere. Used under license in
Canada.
GET STARTED
QUICK START GUIDE
In a few easy steps you’ll be on your way to enjoying something delicious! For
complete instructions and videos, go online to
kitchenaid.com/quickstart.
-
Check to be sure that the Stand Mixer is unplugged and the speed control is turned to “0”.
NOTE: To move the speed control lever with ease, lift slightly up as you move it across the settings in either direction. -
Raise the motor head: Slide the locking lever to the unlock position and lift the motor head. Once lifted, ensure the locking lever is in the lock position to keep the motor head up.
-
Attach the bowl: Place the bowl on the bowl clamping plate and gently turn it in a clockwise direction to lock it into place.
-
Attach any accessory: Slip the accessory 4. Attach any accessory: Slip the accessory
-
Lower the motor head: Slide the locking lever to the unlock position and guide the motor head down. Make sure motor head is completely down, then slide the locking lever to the lock position. Before mixing, test lock by attempting to raise motor head.
*Available with select models only and available as an accessory purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>