Shenzhen Baojia Battery Technology MPC-002 Foldable Keyboard User Manual

Shenzhen Baojia Battery Technology MPC-002 Foldable Keyboard

Introduction:

MPC-002 mini type Wireless connection keyboard with full-size alphanumeric keys, and the keycap with middle-low and high round structure brings you wonderful typing feeling. It is compatible with IOS, Android, and Windows system input device.

ON/OFF operation:

The keyboard adopts sensitive induction switch. The keyboard will automatically wake up after opening and shut down automatically after closing.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The device has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure conditions without restriction

Wireless connection pairing connection:

First, when the keyboard is opened, blue LED light will be lighted, Press the FN+C key, the blue LED light will flash, the keyboard will access in pairing.
Second, active the “Wireless connection “function in the device which you are going to operate, and find MPC-002, then press continue key to connect. If the connection is successful, the blue LED light will always be lighted.

LED light indication

1.  Power indication LED light- When the keyboard switches on, the blue LED light will be turned off after 3-second.
   When the keyboard is paired, the blue LED light will flash.
   The Red led light will flash in low energy, and the Red led light will be lighted in charging. Red led Light will be turned off after full charging.

2.  Caps Lock LED light- Press” CAPS-lock” key to shift “Capital” and “Lowercase “.

keyboard operation instruction:

When the keyboard and the operation device is in successful pairing. Please Press FN+Multimedia key to confirm the corresponding system, otherwise some of the function keys will out of work.

FN -function key instruction

FN key must combine the key with the same color to use ( The below figure for Android system functions can match with Samsung tablets perfectly . for other brand tablets, there will be some difference )

FN+按键图标FN+ Multimedia

key

|

IOS

|

Android

|

Windows

---|---|---|---
| Pairing| Ppairing| Pairing
| IOS| –| –
| –| Android| –
| –| –| Windows
|

Home page

|

Home page

|

ESC

|

All selection

|

All selection

|

F1

|

Copy

|

Copy

|

F2

---|---|---|---
| Cut| Cut| F3
|

Paste

|

Paste

|

F4

| Search| Search| F5
| Shift      input

method

| Shift      input

method

| F6
| On/off      soft keyboard| On/off

soft keyboard

|

F7

| Previous| Previous| F8
| Play/Pause| Play/Pause| F9
|

Next

|

Next

|

F10

|

Volume down

| Volume down|

F11

| Volume  up| Volume  up| F12
| delete| delete| delete
| Lock| Lock| Lock
| Page up| Page up| Page up
| Page down| Page down| Page down
| Beginning     of

Line

| Beginning      of

Line

| Beginning     of

Line

| End of Line| End of Line| End of Line

Technical data:

• Charger interface MICRO interface
• Frequency parameter Blue tooth 4.2 standard Class2
• Modulation type GFSK
• Working voltage 3.3V-4.2V
• Working current 1.3Ma-1.6Ma
• Sleeping current 80Ua
• Lithium Battery capacity 120Ma
• Charing current <100Ma
• Charing voltage 5V
• Charing time <2hous
• Stand-by time >120 Day
• Uninterrupted working time 85Hours
• Battery life 3-year
• Key Strength 65g±10g
• Key life 3million strokes
• Operation distance <10 meters
• Ambient temperature -10~+60DegC
• Storage temperature -40~+65DegC
• Key board unfolded Dimension 11.65″3.72″0.2″

Energy-saving mode

Without any operation more than 10minutes, keyboard will access in sleeping mode automatically, and the power indication light (Blue LED) will turn off. Press any key in 3-second, the keyboard will wake up, and the blue Led light will be lighted.

Battery Charging:

When the device lacks of power, Red Led light will be lighted. The device need battery charging. First, Connect the one side of MICRO USB to keyboard, the other side to adaptor or computer. Second, the Red LED light will be lighted in the charging process, and Red LED light turns off after battery full charging.

Security advice

Caution: Risk of electric shock, in fire and keyboard device damage due to incorrect operation.

1.  Stay away from sharp objects
2. Do not put heavy objects on the keyboard
3. Do not heat it in the microwave
4. Do not press hardly or twist the keyboard
5. Stay away from oil, chemicals, or other dangerous liquids
6. Clean the keyboard case by water, alcohol or medical alcohol.

FAQ

(A) If you cannot connect the Wireless connection keyboard to your device successfully or use it smoothly, please try the following steps

1. Ensure the keyboard is within 10 meters of the effective working distance
2. Make sure the Wireless connection is paired. If not, re-pair it
3.  If the Wireless connection keyboard repairing is unsuccessful, please delete the name of the connected Wireless connection device and repair it
4. Please check the battery, if the battery lacks of power, please recharge it .

(B) The keyboard battery charging is not workable

1. Make sure the USB charging cable is properly connected to the keyboard and power supply.
2.  Make sure the charger is connected to the power outlet

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>