Shenzhen X Photoelectric Technology X-40PRE Aurora Projector User Manual
- June 5, 2024
- Shenzhen X Photoelectric Technology
Table of Contents
User Manual
Thanks for your purchasing lease read this manual carefully before operating
the system.
It gives you general information for your safety and better operation.
Packing Accessories
Check for the contents in the package refers to the bellowing lest:
- 1 x Light
- 1 x Adaptor
- 1 x User manual
- 1 x Remote control
Button Instructions:
- The default effect is the Aurora effect, that is LED lighting changes automatically with the sequence of green, blue and red, laser lighting fade in and out.
- Press the button “Aurora” once then came into voice control mode, that is Led lighting changing to the beat of the music, laser lighting Fade in and out.
- Press the button “Aurora” a second time, the Led lighting will change the color automatically.
- Press the button “Starry Sky” to enter the Nebula cloud effect, which is blue led lighting with laser lighting Fade in and out.
- Press the button “Starry Sky” a second time to enter voice control mode, Led lighting no change, but laser lighting will flash to the beat of the song.
- Press the button “Starry Sky” a third time, then there is led blue lighting only.
- This button is for power on/off.
Remote Control Instruction
Product Features
| Input power: | AC110V-240V |
|---|---|
| Output power: | 12V 1A |
| Laser Power: | 30mW 515nm green |
| LED Power: red: | 1W, green: 1W, blue: 1W |
| Housing material: | ABS |
| Application: | Home light, Party light, Atmosphere light, Bedroom, Night light, |
Theater, Restaurant, Bar, etc
FCC ID: 2AX2GX-40PRE
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.