Fovaa B01F LED Bulb User Manual
- June 5, 2024
- Fovaa
Table of Contents
Fovaa B01F LED Bulb User
Safety Instructions
- The bulb is not waterproof. Avoid exposing it to splashing or dripping water.
- The operating temperature should be within – 10′ to 40’C(14’to 104’F).
- The bulb’s internal light source is unfixable. If it breaks, you must replace the entire bulb.
- Do not allow children to install the bulb alone.
- Do not install the bulb with a dimming driver.
- Do not twist the bulb housing.
- Avoid installing the bulb near heat sources.
- Avoid installing the bulb near potentially dangerous sources (e.g., candles, liquid-filled objects).
Introduction
Thank you for choosing Fovaa Smart Alexa Echo LED Bulb. The LED bulb connects
quickly to your Alexa APP in just a few simple steps. You can control the bulb
by voice or smart phone, no
need to download other APP, Alexa and Echo are more convenient and safer.
Packing list
- LED Bulb 1
- User manual 1
Specifications
|
---|---
Working Voltage
Power
| AC120V
9W
1000lm
Lumen|
Color temperature| 2700K- 6500K
RGBWW
Color| -10″ to 40’C / 14’F to 104’F
Working Temperature
Bulb Shape Size
| A19
| E26
Screw Base|
Installing Your Bulb
- Screw the bulb into base.
Notice: Switch off the power switch controlling the bulb before installing.
Connecting the Bulb to alexa APP
NOTICE
- Please make sure the bulb is powered on and fishing, Alexa is logged in, and Echo is connected. [If the bulb can’t flash, you’d better to repeatedly power on and off until it can flash.]
- Alexa Echo requires 2nd Gen and above, and has Bluetooth Mesh function.
- Please ensure your Amazon Alexa device is set up before adding the Smart bulb. It needs to have the latest software upgrade. You can try “Alexa, is my software up to date?” to trigger software update, then add the smart bulb.
- 0pen Alexa Home, say” Alexa Find Device”, wait for about 45s, and then follow your echo command for voice operation;
- Start to control the bulb with Voice or smartphone.
Cannot connect the bulb to Alexa
- Make sure the bulb is powered on.
- Keep the phone and echo closer to the bulb.
- lf the connection still fails, restart your Echo device and make sure it is connected to the network, and then reconnect.
FCC Statement
FCC ID: 2AY4S-B01F
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radionv technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.