Simpled WF-SP WiFi Camera Doorbell User Manual
- June 5, 2024
- Simpled
Table of Contents
Simpled WF-SP WiFi Camera Doorbell User Manual
Packing List
After opening the package, please make sure the doorbell (hereinafter referred to as the * Equipment· ) is in good condition. Make sure parts below is included.
Appearance Introduction
Home Button To reset the device. long press this button for seconds To
light the display. short press this button for 1 second.
Battery Slot Support 1 * 5000 battery
USB Interface Micro USB port charging
Mounting Port Use this port to mount the camera to bracket
Setup the Device
Thank you for choosing our products! Please follow below instruction to setup and use your doorbell device.
1. Downloading and installing the APP
Open App store (for iOS) or Google Play Store (For Android outside China) or Yingyongbao Store (For Android inside China) on your device, Search for “TuyaSmart” or scan QR code as following to download the right App for your device
2. Setting up the APP
Before you begin;
▶ Make sure the TuyaSmart APP is installed to your device
▶ Make sure that your device is connected to a 2.4GHz network is NOT
compatible.
User Register
New user register it according to guide steps, already registered user just
login it
3. Add the device
Before add, make sure the device is in configuration – with a voice notification (Blue light blink per ls)
If you didn’t hear the voice notification , please RESET the device by pressing the home button for 0 seconds. You can release the button after the LED indicator turned off, the device will restart to default setting automatically.
Open the “TuyaSmart· app and tap “Add Device” Select device type : Video Surveillance – Smart Doorbell , then make connection with the device according to the steps.
Choose “next step”, the name of the WiFi network will automatically be filled
in, enter the WiFi password and tap “confirm'”.
Note: The App will fill the corresponding password automatically if connected
with the same WiFi, and you don’ t need to fill in password again.
When you hear the prompt “connecting the network”
Choose “Continue· and use camera to scan the QR Code show on your phone, make sure about 15-20cm distance between the mobile device to the doorbell, When you hear the prompt “connecting the network”, tap “I heard a Prompt” and waiting for device connection till success If your camera fails to connect, please try to RESET the camera and repeat all steps again.
When the app show Device added successfully, Congratulations! The device is ready for use now!
4. Wifi Doorbell Functions
Support following functions: Two-way Audio; Video recording to local file; Take Photo; Playback video on Micro SD card.
4.1 Live view
In the device list section, it shows all devices with successfully
connections. click the corresponding device to live view videos directly.
4.2 Micro SD Card Video Playback
Micro SD Card Recording Type: APP wake up the device and take video; Press
button to wake up the device and take video; Motion detection and take video;
Remark: Currently the device only supports Micro SD cards with the FAT32
system format, others cannot be identified.
5. Device Management
Click the corresponding device to live view videos directly in the device list section, You could choose·•· · ” at the top right corner to enter device setting.
5.1 Modify Device Name
Click “Device Name” on setting page to rename device
5.2 Device Sharing
Click “Share Device” on setting page to share the device to other family
members.
5.3 Device Information
Click “Device information” on setting page to check device information.
5.4 Power Management Setting
Click· Power Management Setting” to check power working status or set the low
battery alarm threshold.
Options: 10 96 – 50 9′
5.5 Basic Function Setting
Click “Basic Function Setting” to set below functions:
Flip Screen: on/off; Time Watermark: on/off; Talk Mode: One-Way Talk/ Two-Way
Talk
5.6 PIR sensitivity Setting
Click “PIR” to set the sensitivity.
PIR: Low/Medium/High/Off
Off: Close PIR function.
low: Wake up and record footage if any motion in front of the camera last for more than 7 seconds been detected. A notification will be sent to mobile devices at the same time.
Medium: Wake up and record footage if any motion in front of the camera last for more than 5 seconds been detected. A notification will be sent to mobile devices at the same time.
High: Wake up and record footage if any motion in front of the camera last for more than 1 seconds been detected. A notification will be sent to mobile devices at the same time.
Note: In crowded environment, it is recommended to close or sett he device to LOW sensitivity to reduce unwanted wake up and notification push to extend battery life.
5.7 Memory Card Settings
Click “Memory Card Setting” to check Micro SD card status, include total
capacity, used and remaining capacity or format memory card.
6. Note for using
- a. When device is powered by recharge able lithium batteries. With fully charged , the battery life approximately could be around six months. The mobile device APP will send notification when battery voltage is low. Please charge the device in time if you get the notification.
- b. Keep the camera within your router’ s range. Make sure to pick a place where is covered by your Wifi signal. Thick or insulated doors can greatly reduce the strength of your Wi Fi signal even if your router is close by. Trial test before installing the camera is recommended .
- c. The device is designed base on low power consumption component, it could be remotely wake up from the APP, by PIR human motion detection, or doorbell press. The device will work for 30 seconds after wake up each time then back to standby.
Technical Specification
Function Introduction
Contact us:
Twitter
Instagram
Facebook
LinkedIn
Note:
- We provide you with a two-year warranty from the date of purchased.
- This warranty service is valid for customers in any country in the world.
- For more help please scan the QR code, or contact us: support@simpled.tech
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>