FOREVER BS-700 Bumpair 5W Shockproof Bluetooth Speaker User Manual

FOREVER BS-700 Bumpair 5W Shockproof Bluetooth Speaker

Thank you for purchasing a product by Forever. Before use, please refer to the User’s manual, and save it for future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and ac-cessories provided by the manufacturer. The device should not be exposed directly to water, moisture, sunlight, fire or other heat sources. We hope that the product by Forever fulfills your expectations.

OVERVIEW

Image Description

1. ON/OFF button
2. Function key: “-” / Volume down / Previous track
3. Function key: Play / Pause, Answer / Hang up
4. Function key: “+” / Volume up / Next track
5. RGB light ON/OFF / light mode change button
6. MicroSD card slot
7. Audio input 3.5 mm
8. MicroUSB charging socket
9. LED
10. Leash clamp
11. LED RGB backlight

Specification

• Bluetooth version V5.0
• Coverage: up to 10 m
• Loudspeaker power: 5 W
• Input drives: 5 V DC
• Input: microUSB
• Bandwidth: 90 Hz – 20 kHz
• Battery: Lithium polymer: 3.7 V 1200 mAh
• Signal to noise ratio (SNR): ≥ 60 dB
• Battery charging time: 4 hours
• Music playing time: up to 5 hours (varies depending on volume setting and audio content)
• Operating mode: Bluetooth, audio IN, microSD card, RGB light, TWS

Charging

Connect the microUSB cable included in the set to a power source of maximum volta-ge 5 V DC. As a power source, you may use a wall charger with USB output. Insert the second end of the cable into the microUSB socket in the loudspeaker. Charging will be signaled by the illumination of the red LED located near the charging socket. After the battery fully charges, the LED will turn off. When the loudspeaker is fully charged, disconnect it from the power source.
The loudspeaker has an in-built battery – to prevent damage to the set, do not remo-ve the battery on your own.

Activation

Press and hold ON/OFF button until the LED lights up

Deactivation

Press and hold ON/OFF button until the LED goes out

Available operating modes

• Bluetooth
• Audio linear input (audio in)
• Playing music from a microSD card
• TWS function

Loudspeaker pairing

1. Press and hold ON/OFF button until the LED starts flashing
2. Activate Bluetooth connectivity in the device, which you want to connect with the loudspeaker.
3. Search for a new device. The loudspeaker will be visible as “BS-700” on the list.
4. Connect with the loudspeaker. Certain devices require entering code “0000”
5. Correct connection of the loudspeaker will be confirmed with a voice message. If you connect the Audio-in cable, Bluetooth connectivity will be interrupted.

Change of mode

To switch Bluetooth / SD Card/audio cable mode, press button (4)

TWS CONNECTION

1. Activate two loudspeakers
2. Press and hold Play / Pause button on one of the loudspeakers for 2 seconds until you hear the audio signal.
3. Release the play / pause button. The connection of loudspeakers may take several seconds.
4. Activate the Bluetooth function in the device, select the “BS-700” loudspeaker name from the list and pair the devices.

Press Play button twice to deactivate TWS function.

Music playing

1. Pair the loudspeakers with the device that is the sound source, and then start playing music on it.
2. The music application allows to skip, fast-forward or rewind tracks, as well as change volume

Tracks skipping

When listening to music, press the “+” button to skip to the next track or press the “-” button to skip to the previous track.

Change of volume

When listening to music, press and hold the “+” button to increase the volume or press and hold the “-” button to decrease the volume in order to set the required volume.

Answering/declining incoming calls

In order to answer a call via BS-700 loudspeaker, press the “PLAY” button

Play mode using SD card

1. Turn the loudspeaker on
2. Insert a microSD card
3. The music will start playing automatically.

Deactivation / change of RBG illumination type

RGB illumination may be activated by pressing button (5) ten times. To change the illumination mode, press button (5).
The set includes

1. Loudspeaker
2. MicroUSB cable
3. Manual

Safety principles

Note:Do not present the unit in direct sunlight or UV light, as the BumpAir surface (Thermoplastic Polyurethane) will be yellowing by UV.

1. Long-term listening to loud music may lead to hearing loss and health impairment.
2. Pay special attention to your surroundings when listening to music while moving.
3. Read and keep this manual.
4. Do not remove the cover of the device. Inside, there are no parts that can be repa-ired by the user. Any repairs should be carried out by a serviceman.
5. Note: The battery must not be exposed to direct sunlight, fire or other heat sources.
6. Note: Only use original parts/accessories supplied by the manufacturer.

TelForceOne S.A. declares that the product is compatible with requirements and other relevant provisions of the 2014/53/UE directive. You can download the decla-rationon of product on website www.telforceone.pl.

References

• Dystrybutor akcesoriów GSM - TelForceOne
• Urządzenia mobilne, technologiczne, ubieralne – Sprzęt elektroniczny, elektronika użytkowa | Sklep Forever
• Dystrybutor akcesoriów GSM - TelForceOne

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>