hp 1D0K9AA 930 Creator Wireless Mouse User Guide

hp 1D0K9AA 930 Creator Wireless Mouse User Guide

Installation

OR

• **A

**

• **B

**

• **C

**

• D
  
  www.hp.com/support
  To download the Bluetooth Pairing User Guide , go to http://www.hp.com/support.

Introduction

Connect the mouse to one computer using the receiver and up to two computers via Bluetooth®.

To program the mouse buttons or change the DPI setting (1200 DPI by default), use the software. If the software does not download automatically, on your computer, open Microsoft Store or Apple Store. Search for HP Accessory Center, and then download the app.

Components description

1. Programmable forward button
   By default, press to display the next page in your application history.

2. Programmable Task View button
   By default, press to display all virtual desktops in Windows® 10.

3. Programmable back button
   By default, press to display the previous page in your application history.

4. Pairing button
   Press to switch between channels. Press and hold for 3 s to ente  pairing mode for the selected channel.

5. Programmable right-click button

6. Programmable scroll wheel
   Scrolls the screen up or down. Tilt right, tilt left, or click to use functions programmed in the app. By default, tilt right to scroll the screen right, tilt left to scroll the screen left, click to use application specific functions, and click and hold to scroll when you move the mouse up or down.

7. Hyperscroll button
   Press to turn hyperscroll on or off.

8. Battery light
   White (5 s): The mouse is on.
   Blinking amber: The mouse needs to be charged.
   Solid amber: The mouse is charging.
   Solid white: The mouse is fully charged and connected to power.

9. Receiver light
   Quickly blinking white (5 s): The receiver channel is currently  selected and the receiver is not connected to a computer.
   Solid white (5 s): The mouse is connected to the computer to which the receiver is connected.

10. Bluetooth pairing lights
    Quickly blinking white (5 s): The illuminated Bluetooth channel is currently selected. If you attempted to pair the mouse to a computer, the pairing was not successful.
    Solid white (5 s): The mouse is connected to the computer that is paired to the illuminated Bluetooth channel.
    Slowly blinking white (180 s): The illuminated Bluetooth channel is in pairing mode.

RMN/: STA-AM02 + STA-AD01

© Copyright 2020 HP Development Company, L.P.

The Bluetooth trademarks are owned by their proprietor and used by HP Inc. under license.

Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: September 2020

References

• hp.com/support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>