soundcore Rave Mini User Manual

sound core Rave Mini User Manual

Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Soundcore Rave Mini can be immersed in water up to 1m for up to 30 minutes.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner / oil to clean.

What’s Included

At a Glance

1. Power Button / Power Indicator
2. Bass Up Button / Bass Up Indicator
3. Light Effects Button / Light Effects Indicator
4. Previous Track Button
5. Volume – Button
6. Multi-function Button
7. Volume + Button
8. Next Track Button
9. Source Input Button / Source Input Indicator
10. Bluetooth Button / Bluetooth Indicator
11. DC Power Input
12. USB Port
13. AUX IN Port

Using Your Soundcore Rave Mini

1. Turn On / Off
   

ON         Press and hold for 2 seconds
OFF        Press and hold for 2 seconds

a. Bluetooth Mode

Note: Soundcore Rave Mini can pair up to 2 mobile devices via Bluetooth(Dual Bluetooth Connection). Soundcore Rave Mini can only play the music on one
mobile device at a time.

With True Wireless Stereo technology, you can pair your Soundcore EN Rave Mini with another Soundcore Rave Mini to explore the best
sound effects with left and right sound channels separated on both speakers.

Check available Light Effects modes on Soundcore App.

When turned on, Soundcore Rave Mini will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps. Having connection problems? Remove Soundcore Rave Mini from
your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

b. Source Input

Plug in an audio cable or insert USB drive (FAT32 / FAT16 formats), then press EN the source input button to switch between AUX in mode and USB mode.
Note: USB mode support MP3 / WAV / WMA formats

Solid Green(Source input indicator)      AUX in mode
Solid White(Source input indicator)       USB mode

2. Charging your Soundcore Rave Mini

Use the included DC power cable to charge your Soundcore Rave Mini and make sure it is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.

3. Beat-Driven Light Show

Press to turn Light Effects On / Off
Note: Flash can be turned off in Soundcore app individually.

4. Soundcore App

Download the Soundcore app for an enhanced product experience. Follow onscreen instructions to set up Soundcore app.

When not in use, store your speaker in a cool place. Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited Warranty.

Specifications

Specifications are subject to change without notice.

Input: 100V-240V AC, 50~60Hz
Output: DC 5V, 2.4A(MAX)
Audio output: 80W
Battery capacity : max. 4900 mAh
Charging time : 4.0 hours
Playtime (varies by volume level and music content): 18 hours
Size : 180 x 180 x 369 mm
Weight (without packaging): 3.5 kg / 123.4 oz
Bluetooth version: V5.0
Bluetooth range : 20 m / 66 ft

Read More About This Manual & Download PDF:

References

• Soundcore EN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>