WAIKIL G7 Professional Electric Push Shear Instruction Manual

WAIKIL G7 Professional Electric Push Shear

Specifications

• Model: G7
• Type: Rechargeable Electric Push-Shear
• Battery: High-performance 18650 lithium battery
• Adjustment: Five-gear fine-tuning, 3-speed adjustment

Trimming

1. Select the appropriate limit comb based on the desired trim length.
2. Install the chosen limit comb securely onto the trimmer.
3. Turn on the trimmer and move it back along the pet’s hair to trim to the desired length. To trim without a limited comb, gently brush the pet’s hair for a
   uniform and natural look.

FAQ :
Q: Can I use the product for purposes other than pruning?
A: No, it is recommended to only use the electric push-shear for pruning purposes to ensure optimal performance and safety.

Professional electric push-shear

Installation and operation instructions
Thank you for buying G7 rechargeable electric clippers
Please read this instruction carefully before using it and keep it carefully after reading For future inquiries.

The component of the product

Professional electric push-shear
Installation and operation instructions
Thank you for buying G7 rechargeable electric clippers.
Please read this instruction carefully before using it and keep it carefully after reading
For future inquiries.

The component of the product

Matters needing attention

DANGEROUS

1. This product and accessories not toys, please place them in the reach of the children’s touch, lest produce risk.
2.  Please do not use a wet hand plug USB charging line, USB charging line should avoid touching the liquid.
3.  Please make sure that the fuselage, USB charging line, and dry battery, do not used in the bathroom.
4. When the USB charging line is damaged, or cooperate with socket is loose, do not use it.

WARNING

1. Please check whether the tool head is damaged or deformed before use.
2. When using the USB charging cable, pull the charging cable by yourself
3. This product can only be charged with the matching USB charging cable.
4. USB charging cables must use special soft wire or from the company and professional maintenance department special gradually to replace.
5. Do not use electric shear for other purposes other than pruning.
6. Do not press the knife head against the skin.
7. Do not use diluent, gasoline, alcohol or other chemicals to clean the electric push-shear.
8. Please store the electric push-shear in a dry place after use, do not store it in direct sunlight or other heat sources, and do not place it in the car.
9. Please properly handle the packaging bag of this product to avoid accidents such as infant room rest.
10. Keep lubricating oil away from infants and children.

Attention

1. Do not press the weight on the USB charging cable to avoid damage or deformation of the USB charging cable.
2. in the use and charging process, the trimmer will appear a slight heat, this is a normal phenomenon, please rest assured to use.
   In case of any abnormality or fault found in this product, please stop immediately and deal with it according to the fault type. If necessary, the product shall be repaired by the maintenance department of the company.

Method of use

Charging

1. . After turning off the trimmer switch, insert the USB charging cable into the trimmer (Figure 1).
2. Insert the USB charging cable into the USB socket.
   • Please charge in 5C to 35 C environment.
   • The voltage input of this product is 5V-charging time is about 5 hours.
   • It lasts about 1.5-2 hours on a full charge.
   • For the first use or not used for more than three months after purchase, please charge for 6 hours (to activate the rechargeable battery). If the lithium battery is charged after complete discharge, the charging indicator may not be on, and it will be normal after a few minutes of charging.
   • In order not to affect the service life of the product, remove the USB charging cable from the USB socket after the battery is fully charged. Do not allow the trimmer to be connected to the external power supply for a long time.

Warning
The battery should have a residual charge before charging and only use a standard charger or USB outlet.

It is forbidden to non-rechargeable batteries used in this product.

1. Before each use, the number of drops of oil in the tip area of the blade tooth (Figure 2 circle)

2. According to the use situation can be used with the limit comb.

   • This product is equipped with four limit combs (length indicated on parts).
   • Select the limit comb adjusting knob and place it in the “2.0” position. then select the appropriate limit comb and install it in the trimmer. when it is installed in place, the” click “sound will be heard (FIG. 3), and then rotate the adjusting knob to adjust it to 0.8 gear.
   • After use, rotate the adjusting knob of the limit comb, put it in the “2.0” position, and pull out the limit comb (Figure 4).

3.  trim

   • Select the appropriate limit comb to install, and turn on the switch, so that the trimmer back along the pet’s hair, and the hair is trimmed to the appropriate length.
   • Do not stay in one place while trimming, keep moving slowly at all times.
   • Trimming without a limit comb
   • Care should be taken when cutting without a limited comb to prevent excessive shaving of the pet’s fur.
   • Trim the coat gently from top to bottom (Figure 5).
   • When dressing the whole, lightly brush the hairy part as the center to make the whole hair uniform and natural (Figure 6).

4 Care and maintenance

1. Disassembly and installation of tool head Note: The switch must be in the OFF state and the adjusting knob in the “2.0” position. Remove: such as graphic, holding a trimmer, will adjust knob in the “2.0” gear, with one hand under the thumb of the segment, another hand catch segment (figure 7) installation: needs to be fitted with a cutting head, the adjusting knob in the “2.0” gear, insert the tail of the cutting tools positioning steel trimmer positioning groove, and the segment according to the direction as shown under pressure, until you hear “clicking” Sound, the tool head is installed (Figure 6)
2. Clean
   • Remove the tip and use a cleaning brush to remove the hair in the trimmer and around the tip (Figure 7). * The knife head can be cleaned with water alone to remove the hair stuck in the knife head. After that, dry the knife head with a cloth and then dry it (Figure 8).
3. Maintenance
   • After the tool head is cleaned, drop oil in the circle area in Figure 2 as shown in the figure.
   • Put the tool head back on the trimmer, turn on the switch and run for a few seconds, then turn off the switch.
   • Tip: Before and after using the trimmer, please drop oil on the tool head to avoid dull, hot, and abnormal sounds. Tool head life: Tool head life depends on the frequency of use and the length of use time. When you find that the trimming effect decreases, please replace the tool head.
4. battery use The battery of this machine is a rechargeable lithium battery, specification 18650, 3.7V; The battery of this machine is a rechargeable battery. If the battery life is exhausted, please contact the dealer to purchase a battery for replacement.

Note:
If you find that the battery has leaked, please wipe the body clean with a cloth in time, and put the battery that has leaked into a plastic bag and hand it over to an institution with recycling and processing qualifications. Do not discard it at will to avoid environmental pollution.If the battery fluid comes into contact with your skin, rinse it with clean water. If you feel uncomfortable, seek medical advice immediately.
Battery life: Battery life depends on the frequency and duration of use. If the battery is charged three times a month, the battery life is about three years. If it is not used for a long time, it is recommended to charge the trimmer at least once every 3 months to ensure battery life.

Environmental Protection and Recycling

Built-in rechargeable batteries contain substances that pollute the environment. When you decide to discard this product, please remove the battery and discard the battery in a government-designated place or recycling unit.

1.  Turn on the trimmer switch until the trimmer stops working and the battery is exhausted.
2. Disassemble the trimmer before removing the battery, turn off the switch and disconnect the power supply.
3. Use a screwdriver to open the case, take out the battery circuit board, and cut off the positive and negative connection pieces of the battery with scissors.

Warranty and Service

• We guarantee our products for a period of 12 months starting from the date of purchase.
• The above warranty does not cover:
• Any damage caused by improper use of the following contents (such as: using the wrong current, voltage to insert the product into the inappropriate socket, or artificial damage, etc.), *
• This may cause aging and wear of the product due to normal use, but has little impact on the use function and value of the product.
• The warranty expires if the product is repaired by an unauthorized person or if the product uses parts other than our own.

Q&A

Model series and specifications

The name and content of the hazardous substance in the product

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>