Doors Korea M37 Bluetooth Karaoke Mic User Manual
- June 5, 2024
- Doors Korea
Table of Contents
Doors Korea M37 Bluetooth Karaoke Mic
COMPONENT
Quick Directions
For more detailed directions see enclosed instructions
- Turn ON : Press Power button 2-3 seconds, green light will show
- Bluetooth Pairing: You can pair using Bluetooth (Please check the description on the right)
- Play Music: You can play music through a Smartphone APP.
- Volume Control: You can control Volume and Echo on demand.
- Lyrics Elimination Mode: This mode significantly lowers recorded singer’s voice.
- Duet Mode: Connect two MICs together so you can sing with others.
- Turn ON / OFF : Press POWER 2-3 seconds
- Charge Cable: Connect 5 pin charging cable to charger or desktop USB.
- App : You can use any Smartphone APP to use this product.
- USB Play: you can play your own MP3 music stored in your USB. Please check description in enclosed manual
How to Charge
- The Red Light is on during charging; when fully charged, the Red Light is off
- The included battery [in the package] is not fully charged. You may use the device after it is fully charged.
- Microphone must be turned off when charging
- Plug the micro USB port cable into the MIC port, and another port into a USB port.
- A full charge usually take 1-3 hours
- A fully charged Battery can be used for 1-4 hours
Note: The mic will automatically turn off when the battery charge is low. Please note that charging times can vary depending on outside circumstance or battery condition You can check the battery status on your Mobile phone if the MIC is connected through Bluetooth.
Duet Mode
Duet Mode needs two mics.
- Turn on both mics
- Push the PLAY button for 2 -3 seconds on one of the mics. When the two MICS connect, there will be a confirmation sound.
- Search Bluetooth devices on your smart phone and select miracleM M37-SE Bt-mic
- Play music through a Smartphone, and enjoy Duet Mode
- To disconnect Duet Mode, push the PLAY button for 2 – 3 seconds on one mic.
Note: Duet Mode and Lyric Elimination Mode features cannot be used together Duet Mode is available when two MICs are within 2 meter [6.5 feet] of each other
Bluetooth Mode information
To use Bluetooth Mode, you need to pair mic to your smart phone [miracleM
M37-SE Bt-mic]
- To pair the mic properly, Smartphone and the MIC should be within 1 Meter [3 feet] to each other
- Once paired, the MIC can be used as microphone and speaker. If this process does not work, then turn off speaker and try again. Walls or partitions can affect Bluetooth pairing
How to pair the mic to a smart phone.
- Press POWER button for 3 seconds. If it is paired, a green light will show.
- Press M37 POWER button for 3 seconds, confirmation sound and green light on. (After first paring, it automatically pairs with a confirmation sound.)
- In case your device asks for a PASSWORD, please type 0000. (Most smartphone will not need this)
Play Music with output cable.
Lyrics Elimination Mode
What is Lyrics Elimination Mode?
- If you want to sing a song but you cannot find a song from your APP, you can use Lyrics Elimination Mode
- Play the MP3 file you want to use and press POWER button one quick time, the lyrics will sound softer.
- To turn off Lyrics Elimination Mode press POWER button quickly. Then Lyrics Elimination Mode will then turn off with Miracle M making confirmation sound.
- Lyrics Elimination Mode will work when it connected with Smartphone, but does not work with the Output cable connected. Also, Lyrics Elimination Mode does not work when you use the Duet Mode feature.
- You do not need any additional APP to use Lyrics Elimination Mode.
- Lyrics Elimination Mode cannot totally remove the recorded singers’ voice, it will vary depending on the condition of the MP3 file.
FAQ
| Status | Reasons | Solutions |
|---|---|---|
| Microphone not working | Can’t be turned on or the voice volume can’t be | |
| adjusted | Change the MIC, press power button 2-3 seconds and adjust |
the volume
No Reverberation| Unable
volume
| to| turn| up| echo| Switch to Echo volume and
press VOL+
Presence of noise| Environmental noise mobile
phone signal interference
| Adjust the distance between
microphone and Cellphone
Poor Recording| Phone does not match. Phone chip processing ability that is
too weak
| Restart the Smart Phone to try again or try another Smart
Phone
When Playing music, staccato appears| Too Distant to Bluetooth connection or obstructions
between phone and device
| Move closer to Smart Phone, keep away from obstructions
Weak accompaniment sound| Low phone volume or bad-
quality music
| Turn up phone volume or
download high-quality music
Bluetooth cannot be paired| Distant Bluetooth connection or already paired with another
phone
| Get closer to Smartphone or reconnect with another
Smartphone..
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation