hama 00201676 MagCharge Car FC15 Wireless Car Charger Instruction Manual
- June 5, 2024
- Hama
Table of Contents
hama 00201676 MagCharge Car FC15 Wireless Car Charger
Operating Instructions
Controls and displays
A1. USB-C input
A2. Status LED
A3. Function LED
A4. Grating attachment
A5. Car adapter for power supply
LED function indicator
Power supply| Brief illumination blue
Standby| off
Charging process| Lights up blue
End of charging| off
Error message| Flashes blue
Thank you for choosing Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates arisk of electric shock from touching product parts
carrying hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- “MagCharge Car FC-15” wireless car charger
- Grating holder
- 1xcar adapter for power supply
- 1xUSB-C to USB-C connecting cable
- These operating instructions
Safety instructions
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- Do not drop the product and do not expose it to any major shocks.
- Do not operate the product outside the power limits specified in the technical data.
- Do not use the product in areas in which electronic products are not permitted
- Ensure that the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Do not continue to operate the product if it is visibly damaged.
- Use the product only for the intended purpose.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight
- Only use the article under moderate climatic conditions.
- As with all electrical products, this device should be kept out of the reach of children.
- Do not use the product in a damp environment and avoid splashing water.
- Do not bend or crush the cable.
- Never apply force when using the product or during installation.
- When using this product, observe the applicable local traffic laws and regulations.
- Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted
- Ensure that the product is securely mounted before every journey.
- Do not allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.
- Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Warning -magnets
- People with pacemakers should keep away from the magnets. The magnets can negatively affect the function of the pacemaker.
- Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted
Warning
Ensure that there are no metal parts (e.g. metal plate for magnetic
holders) on the back of your device. Metal heats up significantly in the field
of an induction charger and can damage your device and/or the charger.
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the charging cable, adapter cable or power cable is damaged.
- Do not attempt to service or repair the product yourself.Leave any and all service work to qualified experts.
Start-up and operation
Note
- Please be aware that this wireless car charger is only suitable for Apple smartphones of the latest generation that support magnetic, wireless charging.
- Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the back of your device may interfere with or even prevent the charging process.
Note -12V,24Vvehicle electrical systems
The charger is suitable for 12 Vand 24 Vehicle electrical systems.
- Attach the wireless car charger using the grating holder included (A4) to the grating in your car by introducing the holder pin (B1) into the grating and locking it in place with the locking screw (B2). With rounded gratings, please use the retaining plate supplied (B3). The grating holder (A4) is suitable for gratings between 15 mm and 35 mm wide.
- Connect the enclosed USB-C to USB-C connecting cable to the USB-C input (A1) on the wireless charger and the enclosed car adapter for the power supply (A5).
- When the power supply is active, the status LED (A2) lights up blue.
Note
The maximum charging power of up to 15W is only achieved with aPower Delivery
(20W) car adapter (5V/3A, 9V/2.22A, 12V/1.67A) which is included in the extent
of delivery.
Warning
- Only use suitable charging devices or USB connections to charge the product.
- Do not use defective chargers or USB ports and do not attempt to repair them.
- Place the back of your Apple smartphone on the wireless car charger.It attaches automatically thanks to the integrated magnets. (FigureC)
- The charging process begins as soon as an effective induction field has been established. The status LED (A3) lights up blue. The current charge status is displayed on your device.
- The charging process ends automatically once your device’s battery is fully charged. The function LED (A3) goes out.
- If metallic or magnetic objects are on the charger, this is indicated by the function LED (A3) flashing blue.
Note -car battery
With some vehicles, it can happen that power continues to be supplied even
though the ignition has been switched off.You should therefore disconnect the
product from the line connection when not in use to protect your car battery
from being drained.
Care and maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents. Ensure that no water is able to enter the product.
Note
Disconnect the device from the mains before cleaning and during prolonged
periods of non-use.
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.
Technical data
Wireless car charger
Input
| 5V __ 3.0 A
9V __ 2.22 A
12V __ 1.67 A
Output (under optimised conditions)| max. 15 W
Car adapter:
vehicle electrical system voltage| 12V, 24V
Output voltage / current max.
| 5V __ 3.0 A
9V __ 2.22 A
12V __ 1.67 A
Output power total| 20W max.
Declaration of Conformity
Hama GmbH &CoKG hereby declares that the radio equipment type [00201676] is in
compliance with Directive 2014/53/EU.The full text of the EU declaration of
conformity is available at the following internet address:
www.hama.com -> 00201676 -> Downloads.
Frequency band(s) | 112.600 KHz – 152.600 KHz |
---|---|
Maximum radio-frequency power transmitted | -14.69 dBµA/m at 10 m |
Hama GmbH &CoKG 86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>