TMRW RO1901 Registration Tray Instructions
- June 5, 2024
- TMRW
Table of Contents
TMRW RO1901 Registration Tray
DEVICE DESCRIPTION
The TMRW Registration Tray is an RFID registering site for cryo devices and
their associated CryoBeacons.
INTENDED USE
To provide users with an RFID-enabled tool for use during the registration of
containers.
INTENDED USERS
The intended users of the Registration Tray are laboratory professionals
including embryologists, andrologists, clinicians, laboratory technicians, and
laboratory management personnel.Patients do not interact with or come into
contact with
TMRW products.
The patient population served is men and women, typically age between the ages
of 18 years to 50 years at the time of fertility tissue collection.
CONTRAINDICATIONS
None.
ADVERSE EFFECTS
None.
STORAGE
Store at room temperature.
DISPOSAL
Discard in an e-waste facility. There are no lithium batteries used to
operate, nor are any toxic components used in the manufacturing of the
Registration Tray. The PCB assembly is lead-free.
WARNING
Always use appropriate personal protective equipment (PPE) and follow your laboratory’s standard operating procedures and safety guidelines when working with liquid nitrogen (LN2). The Registration Tray requires electricity to function. Use standard caution and care around electrical connections and cords to prevent bodily harm from electrical shock or damage to the machine.
CAUTI0N
Always use proper power and proper electrical compliant connections in accordance with the local electrical code.
INSTRUCTIONS FOR USE
- Place the CryoBeacon in the leftmost slot in the Registration Tray.
- Label the cryo devices.
- Place the labeled cryo devices in the paired CryoBeacon.
- Cap the CryoBeacon.
- Move the CryoBeacon to one of the four slots on the right side of the Registration Tray.
NOTICE
FCC CFR 47 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC CFR 47 15.21
Caution: any changes or modifications to this device not expressly approved by
TMRW Life Sciences, Inc. could void the user’s authority to operate the
equipment.
FCC CFR 47 15.105 INFORMATION TO THE USER
For a Class A digital device or peripheral, the instructions furnished to the
user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. The equipment should be
installed and operated with a minimum distance of 20cm between the radiator
and your body.
.ISED STATEMENTS
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
CAN ICES-3 (A) / NMB-3 (A) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de classe A est conforme à la norme canadienne ICES-003.
RADIATION EXPOSURE STATEMENT ISED
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
greater than 20cm between the radiator and your body.
Innovation, Science and Economic Development Canada ICES 003 Compliance Label:
CAN ICES-3 (A)/NMB-3(A).
TMRW Life Sciences, Inc. 250 Hudson, Suite 701 New York, NY, 10013 tmrw.org
/contact-us
CLIENT SUCCESS Contact for general inquiries into our service or products.
Phone: 917-525-3453
E-mail: info@tmrw.org
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>