ELECOM M-TM10BB Blue LED Bluetooth Mouse User Manual

ELECOM M-TM10BB Blue LED Bluetooth Mouse

Safety Precautions

• Prohibited action
• Mandatory action
• Situation that needs attention

WARNING

• If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the product from the PC. If you continue to use the product under these conditions, it may cause a fire or electric shock.
• If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufficiently check whether the product is generating heat while being careful to avoid being burned. Then, remove the product from the PC . After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a fire or electric shock.
• Do not drop the product or otherwise subject it to impacts. If this product is damaged, immediately stop using it, remove the product from the PC. After that, contact the retailer from whom you purchased the product.
• If this product is damaged, immediately stop using it, turn the power OFF, and remove the battery from the mouse. After that, contact the retailer from whom you purchased the product. Continuing to use the product while it is damaged may cause a fire or electric shock.
• Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a fire, electric shock or product damage.
• Do not put this product in fire, as the product may burst, resulting in a fire or injury.

CAUTION
Do not place this product in any of the following environments:

• In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (such as around a heater)
• In a moist place or a place where condensation may occur In an uneven place or a place exposed to vibration
• In a place where a magnetic field is generated (such as near a magnet)
• In a dusty place
  • This product does not have a waterproof structure. Use and store this product in a place where the product body will not be splashed with water or other liquid. Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
  • Avoid looking directly at the light of the optical sensor as doing so may cause eye damage.
  • If this product is used on a transparent surface such as glass or a highly reflective surface such as a mirror, the optical sensor will not function correctly and the product’s cursor movement will become unstable.
  • Only use this product with PCs and video game systems.
  • Do not use this product with any device that may significantly be affected in the case of this product malfunctioning.
  • When you no longer need to use this product and the battery, be sure to dispose of them in accordance with the local ordinances and laws of your area.

Batteries

• For this product, use AA alkaline battery, AA manganese battery, or AA type nickel-metal hydride rechargeable battery.
• When not using this product for long periods of time, remove the battery. This may cause fluid leak or malfunction.

Cleaning the Product

If the product body becomes dirty, wipe it with a soft, dry cloth. Use of a volatile liquid (paint thinner, benzene, alcohol) may affect the material quality and color of the product.

Precautions on wireless

This product is a wireless device that can use the entire 2.4 GHz band, and is able to avoid the mobile entity identification device range.The GFSK method is adopted as the radio wave method, and the interference distance is 10m.
The 2.4 GHz band is also used in medical devices and wireless LAN devices of the IEEE 802.11b/11g/11n standards.

• Before using this product, check whether “other wireless stations*” are not operating nearby.
• In the unlikely event that radio interference occurs between this product and “other wireless stations *”, change the location of use or stop using this product.
• Other wireless stations” refer to industrial, scientific, medical instruments which use the same 2.4 GHz as this product, as well as other wireless stations of the same type, such as in-house mobile entity identification wireless stations requiring a license, specific low power wireless stations and amateur wireless stations not requiring a license, used in plant production lines.

WARNING

• Do not use in equipment which may cause serious effects due to it malfunctioning. In rare cases, it may be affected by radio waves of the same frequency or radio waves of mobile phones from outside, causing a malfunction, deterioration in operation, or stop working.
• Do not use this product in places where radio wave usage is prohibited, such as hospitals. Radio waves of this product may affect electronic devices and medical devices (for example pacemakers).
• Due to the possibility of hindering safe navigation of aircraft, use of wireless mice in aircraft is prohibited by the Civil Aeronautics Act. Turn off the power of the wireless mice before boarding and do not ever use after boarding.
• Please note that we can not assume any responsibility, even if events such as an accident or social damage occur due to a failure of this product.

Limitation of Liability

• In no event will ELECOM Co., Ltd be liable for any lost profits or special, consequential, indirect, punitive damages arising out of the use of this product.
• ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

Name and function of each part

1. Left button
2. Right button
3. Wheel
4. “Back” button Operates the “Back” button on the Web browser.
5. LED light
   • During pairing standby state, the LED blinks blue.
   • When remaining battery becomes low during use, the LED blinks blue.
6. Pairing button
7. Blue LED sensor
8. Power Switch
9. Battery cover
10. Battery-storage compartment

Win https://www.elecom.co.jp/r/132.html
Mac https://www.elecom.co.jp/r/133.html
Download “ELECOM Mouse Assistant” from the ELECOM website to use its button assignment and high-speed scrolling functions. Windows® RT 8.1 and Andriod are not supported by the “ELECOM Mouse Assistant”.

Insert the battery

1. Remove the battery cover by sliding it in the direction indicated by the arrow.

2. Insert the battery according to instructions displayed on the bottom surface.
   Insert with the correct battery plus and minus orientation.

3. Re-attach the battery cover to its original state.

Turning the Power On

1. Slide the power switch to the ON position. * When the battery is running low, the LED will blink blue  10 times.
   Power-saving mode
   When the mouse is left untouched for a fixed period of time while the power is ON, it automatically shifts to power-saving mode. The mouse is released from the power-saving mode when it is touched. Mouse operation may be unstable for a few seconds after returning from the power-saving mode.

Pairing with a PC

Pairing involves registering Bluetooth® devices (in this case, this product and your device) with each other, and authorizing a connection between them. This section covers Windows® and Macintosh standard Bluetooth® functions. Depending on your device or Bluetooth® adaptor, unique Bluetooth® functions may be used. Please read the respective manuals for each function. Please carry out the pairing operation using your current mouse or touchpad on your device.

Windows® 10

1. Click on the “Start” button on the lower left of the screen, and click on the “Settings” icon.

2. Click on “Devices” on the “Settings” screen.

3. Click on “Bluetooth & other devices”, and click on “Add Bluetooth or another device”.

4. Click on “Bluetooth”.

5. When the add device screen is displayed, hold down the pairing button on the bottom for two to three seconds, and then release. Pairing button
   Pairing mode is activated, and the LED light blinks blue.

6. Click on “ELECOM BT Mouse” to start pairing.

7. When it changes to “Connected”, click on “Done”.

8. This product is added to “Mouse, keyboard, & pen”, displays “Connected “ and pairing is complete.

macOS Catalina (10.15)

1. From the Apple menu, click “System Preferences…” to display the system environment settings screen.

2. Click “Bluetooth” to display the “Bluetooth” environment settings screen.

3. During the device search, hold down the pairing button on the bottom surface for two to three seconds, and then release. Pairing button
   Pairing mode is activated, and the LED light blinks blue.

4. Select “ELECOM BT Mouse”, and click “Connect” to start pairing.

5. When it changes to “Connected”, pairing is completed.

Specifications

Supported OS| Windows® 10, Windows® 8.1, macOS Catalina (10.15),

iOS13.5/iPadOS13.5, Android OS 7 to 10

(Updating the OS or installing a service pack may be necessary.)

• Compatibility information was retrieved during operation confirmation in our verification environment. There is no guarantee of complete compatibility with all devices, OS versions, and applications.

---|---
Resolution| 1600 dpi
Compatible standard| Bluetooth 4.2 Class2
Profile| HOGP (HID Over GATT Profile)
Radio wave method| GFSK
Radio frequency| 2.4 GHz band
Radio wave range| Non-magnetic surfaces (such as wooden desks): approximately 10 m Magnetic surfaces (such as steel desks): approximately 3 m

• These are test values in company environment and are not guaranteed.

Dimensions (W × D × H)| Approximately 54 mm × 104 mm × 28 mm

(Approximately 2.1” × 4.1” × 1.1”)

Weight| Approximately 66 g (Approximately 0.14lb) * Including the battery
Operational temperature/humidity| 5°C to 40°C/ up to 90%RH (without condensation)
Storage temperature/humidity| -10°C to 60°C/ up to 90%RH (without condensation)
Supported battery| Any one of AA alkaline battery, AA manganese battery, AA type nickel-metal hydride battery
Operational time| Estimate when using alkaline battery

Continuous operation time : Approximately 307 hours Continuous standby time : Approximately 833 days Estimated usage time : Approximately 596 days

(The above is assuming the computer is used for eight hours a day with 5% of that time spent operating the mouse.)

FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

NOTICE: The manufacture is not responsible for any radio or TV interference caused by unauthorized modifiation to this equipment. Such modifications could void the user’s authority to operate the equipment. In order to make improvements to this product, the design and specifications are subject to change without prior notice.

FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

ELECOM Korea Co., Ltd.
Dome-Bldg 5F, 60, Nambusunhwan-ro 347-gil, Seocho-gu, Seoul, 06730, South Korea
TEL : +82 (0) 2 – 1588 – 9514
FAX : +82 (0) 2 – 3472 – 5533
www.elecom.co.kr

References

• ELECOM Global | エレコム株式会社
• ページを移動します
• ページを移動します

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>