yodeck Digital Signage Player 4G User Guide
- June 5, 2024
- yodeck
Table of Contents
**yodeck Digital Signage Player 4G
Contents of Yodeck Player Kit
Connection Diagram**
- Power Port
- Micro HDMI Port
- Audio Port
- 4x USB Ports
- Network Port
Installation and Connection
Step 1: Screen Connection
Connect the Yodeck Player to your screen with the Micro HDMI cable in the
package.
Only use the Left Micro HDMI Port on the Yodeck Player, as shown below. Make
sure the TV is powered On and set to the correct HDMI source. STEP 2: Wired
Connection
Connect the Yodeck Player directly to your router/switch by plugging a network
cable (not included) into the Player’s Network port.If you have configured the
Yodeck Player with a WiFi network when you placed your order, go to Step 3. If
you want to pair the Yodeck Player with a wireless network, go to the “Connect
to a Wireless Network” section.
STEP 3: Power Connection
Plug the power cable’s end into the Player’s Power port and plug the power
adapter into a power socket.
The Player will start to work automatically.
For a Wireless (WIFI) Internet Connection
Connect to a Wireless Network
If you have a wired connection, you can initially use it to configure your
Yodeck Player’s WiFi through the Yodeck Portal. If not, you can configure it
as follows:
- Connect a keyboard to any USB port of the player.
- Press Ctrl+Alt+F12 (all 3 keys together).
- Wait for 5 seconds and type “user” (without quotes).
- For password, type “signagepassword”. If that does not work, use the player’s unique password. You can find it in your Yodeck Account. Go to “Monitors”, edit your Player from the list and go to the “Advanced” section, then “Security”, “Remote Support Password”
- Follow on-screen instructions to connect to the WiFi network. Make sure you configure the exact same WiFi settings on the Yodeck Portal as well.
Having Trouble?
Is your screen not showing anything?
Make sure your screen is On and that the screen input is set to the correct
source (e.g. HDMI 1), which is the port you connected your Yodeck Player to.
Boot-up seems to be stuck on the Yodeck logo?
Wait at least 10 minutes before worrying.
Is the Yodeck Player still appearing as “Offline”?
Try using an Ethernet cable instead of WiFi. Or unplug the Ethernet cable,
wait 10 minutes, and plug it in again.
Still not working?
Avoid rebooting constantly, it might do more damage than good, just let us
know and we will help you out.
Need more help?
Scan QR Code or visit our support
pagehttp://yodeck.link/help
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>