FUWANG C12 Wireless Earbuds Bluetooth 5.1 Headphones User Manual

FUWANG C12 Wireless Earbuds Bluetooth 5.1 Headphones

Product Introduction

1. (Multi-function button) MFB Control
2. LED Indicator
3. Charging Contactor
4. TYPE-C Charging Port
5. Charging Case
6. Wireless charging base
7. Earbuds charging base
8. Charging case LED indicator

Basic Skills

Boot up: When the earbuds is picked up from the charging case, it will be
automatically turned on and connected to the connected device in a team.
Shutdown: The earbuds will automatically shut down after being put into the charging case.

Steps:

1. Turn on the Bluetooth device of the mobile phone.
2. Takeout the left/right earbuds from the charging case and automatically power on, the indicator light flashes blue to enter the pairing state; or press and hold the “multi-function button” for about 3 seconds when the earbuds is turned on, and the indicator tight flashes red and blue alternately to enter the pairing state.
3. Find the earbuds model ‘Cl2″ to connect. (To confirm the Bluetooth name)

Note

1. When using the earbuds for the fi rst time, remove the Insulation label on the earbuds so that the earbuds can be charged normally.
2. The earbuds is placed in the charging case and will automatically shut down after the charging state is activated.

Automatic Connection:
After the first connection is successful, the next time the earbuds is switch on, it will automatically connect to the last paired phone by default

Touch function

mode)
play/ Pause| Just one touch
Previous song/next song| Double click the left earbuds, the previous song Double click the right earbuds, the next song
Answer/hang up a call| Tap the left/ right earbuds 1 time
Reject the call| Long press the left/right earbuds for about 2s
Volume+ / volume-| Long press the right earbuds, volume+ Long press the left earbuds, volume-
Voice assistant activation| Tap the left/right earbuds MFB key 3 times

Note:
volume(+); volume(-); previous and next song control, need to be worn under both ears to be effective.

LED Indicator

Charging Compartment Indicator

Headphone Indicator

The earbuds is

connected successfully

| Blue light flashes cyclically for 6 seconds
Music/call status| No lights
low battery| Flashing red
charging| Red light is on
Fully charged| After the red light goes out, the blue light turns on for 5 seconds and then goes out

Specification

Package Contents

• 1 X Wireless R/L earbuds
• 1 X Charging case
• 1 x Earbuds ( S/M/L) (default M is installed on R/L earbuds)
• 1 X TYPE-C charging cable
• 1 X User manual

If the earbuds cannot be connected correctly or the device cannot be connected
correctly, reset the earbuds.

1. Turn off Bluetooth on the device or delete the connection history on the device.
2. Touch and hold the earbuds until the red and blue indicator lights flash alternately, then touch the earbuds 3 times, the red and blue indicator lights wit! light up for 1 second, and the earbuds will automatically turn off the power.
3. The Bluetooth connection of the earbuds has been reset.

Note
Please reset the 2 earbuds together instead of resetting one.

Care and Maintenance

1. Wearing swimming is not supported.

2. After use, keep the earbuds away from heat and moisture.

3. Do not place the product in direct sunlight or high temperature places.
   High temperature will shorten the service life of the earbuds, battery and/ or internal circuit board.

4. Turn off the power of the earbuds when not in use and before storage.

5. Do not try to disassemble the product.

6. Do not drop or knock the earbuds on a hard surface.

Comfortable to Wear

1. Choose the earbuds that best suit your ears.
2. lnsert the earbuds into the inner ear of the ear.
3. Turn and find the most comfortable position.

Are the following directions of rotation correct? Correct

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>