Rasonic RSG-TT203 Steam Grill Oven User Manual
- June 5, 2024
- Rasonic
Table of Contents
RSG-TT203 Steam Grill Oven
1
2
3
4
5
-
3. 4.
-
98. .
5 cm
10 cm
6
1.1 [ ] 1.2 [ ] 1.3 [ ]
7
8
1
2 [ ] 3 [ ] [ ]
9
1 [ ] 2 [ ] 3 [ ]
10
1 [ ] 2 [ ] 11
12
1
2 [ ]
3 [ ]
4 [ ]
3
5 [ ]
6 [ ]
13
1 [ ] 2 [ ] 3 [ ] 4 [ ] 14
15
16
17
18
19
20
21
22
23
1. Ventilation vent
2. Handle
3. Control panel
4. Water tank 5. Droplets tray
6. Water absorbent sponge
7. Insulation gloves
8. Baking tray
9. Grill rack
CAUTION! HOT SURFACE
Top, back and glass door, etc.
Free space shall be left on top of the appliance to prevent condensation and
poor ventilation
Top
Do not place the appliance against the wall or other objects, please keep a safe distance.
At least 5 cm
Both left and right side
Front Open space
Back At least 10 cm
CAUTION! When opening the door, do not pull the handle too hard to avoid
deformation of the glass door, which may result in a loose door.
24
Water tank level Preset icon
Temperature display Time display Cooking function
Menu selection
Oven light
Time Temperature Start/Pause Increase Decrease Power
25
1.1 In standby mode, press and hold Time button [ ] to enter the time setting
interface; 1.2 Press or to set the hour value, press Start / Pause button [ ]
to confirm; 1.3 Press or to set the minute value, press Start / Pause button [
] to confirm;
26
27
COMBO COMBO COMBO
1 In standby mode, press or to select the COMBO function;
2 Press Temperature button [ ] to enter the temperature setting interface,
then press or to set the value;
3 Press Time button [ ] to enter the time setting interface, press or to set
the value and then press Start/Pause button [ ] to start. The operation will
start accordingly.
28
COMBO COMBO COMBO COMBO
1 Press Temperature button [ ] to enter the temperature setting interface,
then press or to set the value.
2 Press Time button [ ] to enter the time setting interface, then press or to
set the value.
3 Press Start/Pause button [ ] to resume operation.
29
1 Press Menu Selection button [ ] to enter the temperature setting interface.
2 Press or to set the menu code, then press Start/Pause button [ ] to confirm
and start.
30
31
COMBO
1 In standby mode, press or to select the COMBO function;
COMBO COMBO COMBO COMBO
2 Press Temperature button [ ] to enter the temperature setting interface,
then press or to set the value;
3 Press Time button [ ] to enter the time setting interface, then press or to
set the value;
4 Press Time button [ ] and hold to enter the setting interface of preset
function; Press and hold for 3 seconds
5 Press or to set the hour value, then press Start/Pause button [ ] to
confirm;
COMBO
6 Press or to set the minute value, then press Start/Pause button [ ] to confirm the preset function. The operation will start after the counting down is finished.
Warm tips
Preset time is the starting time and runs in countdown; the completion time is the preset time + cooking time.
32
1 In standby mode, press Menu Selection button [ ] to enter the setting
interface of menu selection function;
2 Press or and set the code to , then press Start/Pause button [ ] to confirm
and start.
3 After stage 1, clean the water tank and fill it with clean water, then press
Start/Pause button [ ] to continue operation.
4 After stage 2, clean the water tank and fill it with clean water, then press
Start/Pause button [ ] to continue operation.
33
34
35
36