NISSAN Auto-Dimming Mirror With Homelink And Compass Owner’s Manual
- June 5, 2024
- Nissan
Table of Contents
NISSAN- Auto-Dimming- Mirror- With -Homelink- And- Compass- Owner’s
Installation
AUTO-DIMMING MIRROR WITH HOMELINK® AND COMPASS
Your mirror comes packed with features, including auto-dimming technology, compass readout, HomeLink two-way communication and HomeLink car-to-home automation.
HOMELINK WITH HOMELINK CONNECT ®
HomeLink’s mirror-integrated buttons allow you to program and operate devices
like garage doors and gates, in addition to wireless smart home devices like
thermostats and home lighting.
Programming HomeLink is easy with the HomeLink Connect mobile app, which
guides you through the button programming process. It also allows you to
control your smart home devices by paring the app to the mirror via
Bluetooth®.
HOMELINK PROGRAMMING
To program your HomeLink buttons to operate your garage door/gate, or to control your smart home devices, download the HomeLink Connect app.
- Scan the QR code or open Google Play/App Store
- Search “HomeLink Connect”
- Download the app
- Follow app prompts with the vehicle ignition on to pair with the mirror
- Standard garage door programming information can also be obtained at homelink.com.
- To learn more about smart home connectivity via the HomeLink Connect app, visit connect.homelink.com.
AUTO-DIMMING
During nighttime driving, your auto-dimming mirror senses distracting glare
from the vehicle headlights behind you and automatically darkens to preserve
your vision and prevent eye fatigue.
COMPASS SETTINGS
- COMPASS ON/OFF—To toggle the display on/off, use a paperclip to push and release the compass switch.
- COMPASS RESET—To reset your compass:
- Find your location and number on the map below.
- Use a paper clip to press and hold the compass switch until a number appears in the display (hold for 6-7 seconds).
- Press the switch again until your location’s number appears in the display. Your new location will automatically save when the display shows a direction.
- Then, use a paper clip to press and hold the compass switch until a “C” appears in the display (hold for 12-15 seconds).
- Drive the vehicle in a complete circle at less than 5 mph until the display shows a direction.
HomeLink® and the HomeLink House® logo are registered trademarks of Gentex Corporation. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gentex Corporation is under license. “Volkswagen” and the Volkswagen logo are registered trademarks of Volkswagen AG.
FCC and Canada
This device complies with FCC rules part 15 and Innovation, Science, and Economic Development Canada RSS-210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received including interference that may cause undesired operation. WARNING: The transmitter has been tested and complies with FCC and ISED rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. End Users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter