NISSAN RT-NIX5BT Murano Smart Remote Key Instruction Manual
- June 5, 2024
- Nissan
Table of Contents
RT-NIX5BT Murano Smart Remote Key
Instruction Manual
Company: Remote Tech LLC
Address: 310 ALDER RD, Dover, DE 19904, USA
Name: Remote Key
Model: RT-NIX5BT (RT-NIX4BT, RT-NIX3BT)
Operation instructions
- After matching the key to the car, press 3 the unlock key for 2 seconds to open the door and press 2 the lock key for 2 seconds to close the door.
- The Start key is used to manually unlock and start the car.
Product parameters
Rated voltage | DC 3V |
---|---|
Working current | <12mA |
Operating voltage | DC 3.3V-2.2V |
Transmit power | >-8dbm |
Key operation force | 200±50g |
Operating temperature | -5°C +45°C |
Stand-by current | <7uA |
transmitting frequency | 433.92MHZ±75KHZ |
Modulation | ASK |
Battery | CR2032 |
Key durability | More than 70,000 times |
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
instructions, that may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.