FLETCHER-Terry Wire Hanging System for Metal Frames User Manual
- June 5, 2024
- FLETCHER-Terry
Table of Contents
FLETCHER-Terry Wire Hanging System for Metal Frames
Tools Needed
INCLUDES EVERYTHING YOU NEED TO HANG ONE FRAME
- Rotate washers until screw threads are flush with washer rim and aligned with bracket as shown
- TilUslide brackets into left and right frame channels as shown
- Brackets DO NOT have to be the same distance from the top
- Tighten screws
- Insert lorkers and rotate to lock
- Attach bubble level to top of frame using tape
- Attach bumper to bottom center of backside of frame
- Determine desired location, make sure frame is level and press firmly against wall to make 2 dimple marks
- Rotate to unlock markers
- Insert markers into dimples and then nail markers into wall
- Push in and pull down to complete
For additional help hanging frames and mirrors, please visit: www.fletcher- terry.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>