FANTECH XD3 Gaming Mouse User Manual
- June 5, 2024
- fantech
Table of Contents
FANTECH XD3 Gaming Mouse User Manual
Instruction manual
Thank you for purchasing FANTECH HELIOS XD3 Pro Wireless RGB Gaming Mouse.
FANTECH HELIOS XD3 has 50 millions switch and also support on-board memory which can save up to hundreds of different profiles.
FANTECH HELIOS XD3 is a plug and play usb interface programmable mouse, no need to install any driver for your first use. For more enhanced settings and function, you can install the software from our website www.fantechworld.com.
What’s included in the box
- 1. FANTECH HELIOS XD3 Pro Wireless RGB Gaming Mouse
- 1 set mouse skates
- User manual
System requirements
- Operating systems: Windows XP/7/8/10; MAC OS
- USB 2.0/3.0 port
Technical specification
- Pbcart 3335 Gaming Optical Sensor
- 1000Hz Polling Rote
- On-the-fly Adjustable DPI (100-16000)
- Up to 403IPS/40g acceleration
- HuonO 50 million clicks
- Battery capacity: 730mAh
- Battery life: up to 70 hours
- Size: 120mm58mm38mm
- 1.8m Type-C paracord
- Weight: 83gr
Size
Key Function Map
| KEY | KEY FUNCTION MAP |
|---|---|
| I | LEFT BUTTON |
| 2 | MID BUTTON |
| 3 | RIGHT BUTTON |
| 4 | FORWARD |
| 5 | BACKWARD |
| 6 | DPI |
| 7 | POWER SWITCH |
| 8 | USB RECEIVER |
How to Connect
Its plug and play. Connect the mouse to computer by inserting USB receiver to your computer USB port.
How To Use
Power switch
Easily switch the mouse ON or OFF, or switch on ECO for battery saving mode.
Software
Main setup
- 6 Macros button assignment.
- 4 stages polling rate customization
- Battery indicator.
Advanced setup
- 6 Stages DPI customization from 100 – 16000DPI.
- You can customize mouse sensitivity, scrolling speed, double – click speed on advanced setup.
Macro setup
To create new macro, follow steps below:
- Select the profile
- Select the macro bar
- Right click on the macro list bar and click new macro
- Input “Macro Name” then click “OK”
- Click “Start record” to start recording and click “Stop record” to stop recording the marco key (Delay/cycle time can be edited/modified)
- Click “Stop record”, then click “Save” to save the macro.
* To use the macro
- Select the designation button
- Select macro and choose the “MACRO NAME”
- Click “or’
Lighting setup
- Customize up to 4 different lightning setup: Steady, respiration, streaming, LED OFF.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>