FANTECH WH01 Wireless Headphone Instruction Manual

FANTECH WH01 Wireless Headphone

Instruction manual

Thank you for purchasing FANTECH WH01 Wireless Bluetooth Headphone. Lift your limitations and enjoy the audio from Fantech WH01 wireless bluetooth headphone. Move freely with compact design packed  with performance and uninterrupted high-quality sound.

Technical specification

• Bluetooth version: Bluetooth V5.0
• Effective range: 10m
• Driver unit: 40mm
• Speaker sensitivity: 103±3dB
• Speaker frequency response: 20-20kHz
• Speaker impedance: 32±15%Ω
• Microphone sensitivity: -42±3dB
• Microphone directivity: Omni directional
• Microphone impedance:

Headphone overview

LED indicator description

How to use

Turn ON
Long press for 3 seconds, then the headphones will turn on. After powering on, the LED indicator will shine blue for 3 seconds.

Turn OFF
Long press for 3 seconds, the headphone will turn off, after the LED indicator appears Red for 3 seconds.

Volume Adjustment
Short press and to control volume

Music Selection
Long press to skip to the next song And Long press for skip to the previous song

• Play/Pause/Phone calls
• Pause: Short press when playing music
• Play: Short press when music is paused
• Answer calls: Short press when there is an incoming call
• Refuse to answer: Long press when there is an incoming call
• When connected to Bluetooth, double pressing will re-dial the last phone number in your call record.

Language switch
If the headphones are powered on and did’nt connect to any device, double tap on the “M” button to switch language between Chinese and English.

Siri / voice assistant access
When the headphones are connected to your cell phone, double press ”M” to access SIRI / voice Assistant

Connect two devices at once

This headphone supports multiple connections across 2 devices and will not interfere with each other. This allows the user to answer their phone from any paired device.

•  In the status of turn off, long press ON/OFF button for 3s to turn on the headphone and connect it with the first smart phone.
•  Turn off the Bluetooth on your first phone, let the headphone in pairing status to connect with the second device, turn on the Bluetooth on your second smart phone, search WH01, click to connect.
•  Turn on the Bluetooth on the first device, and find WH01 to manually connect again. At this time, the headphone has connected to two smart phones.

Low latency mode
After connecting the headphones to a smart phone, press the “M” button for 3 seconds to enter low latency mode. After successfully entering low latency mode, there will be an audible prompt, which sounds like “du”, and the LED indicator will turn to green.

Bluetooth disconnected
In non-call status, long press and for 5 seconds simultaneously, then the headphone will disconnect from all connected devices. The LED indicator will begin to flash blue and green, alternately.

How to connect

• Bluetooth connection
  The headphone will enter into pairing mode automatically after being turned on. Red and Blue colors will flash on the LED indicator. Turn on the Bluetooth on your cell phone and search for WH01, and then tap to connect. The Blue LED indicator will stay on indefinitely after the headphones are successfully connected. The Blue LED indicator will flash slowly when playing music.

• Charging mode
  When the battery is low, please charge the headphones. The headphones will turn off automatically when charging. During charging, the Red LED indicator will be lit, and will turn off after the battery is fully charged. When connecting the headphones to an IOS device, the current power status of the headphones will appear in the right corner of the IOS device screen. When the battery is low, the headphone will use a voice prompt of “battery low”, to notify the user.

• Line-in Mode
  After plugging in the audio cable, the headphone will power off and switch into “Line-in” mode, where music can be played through the cable. Note : If you want to listen to the music in Bluetooth mode, you need to unplug the audio cable.

WARM TIPS

•  Please charge the headphone with 5V 1A/5V 2A charger, high voltage may damage the headphohe
•  When the headphone has not been used for more than 3 months, it needs to be charged before using.
•  When the headphone has not been used for a long time, we suggest you to charge every 3 months to provide good protection for the battery.
•  We suggest you fully charged the headphone for the first time use.

Attentions

• Please keep or use the headphone in normal temperature, avoid direct sunlight.
•  Please keep the headphone away from fire or other hot object.
•  Please keep the headphone away from damp place or submerged in liquid, keep dry.
• Please don’t try to use other method for charging other than the USB charging cable we provide.
•  Please don’t disassemble, repair or modify.

Warning

•  If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or similar overheating environment.
• The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids.
•  This device is not a children’s toy. Children under the age of 14 need to be accompanied by parents to use.
•  Using headphones for a long time at high volume may cause damage to your hearing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>