hama 00201637 USB-C 20W Car Charger Instruction Manual
- June 5, 2024
- Hama
Table of Contents
hama 00201637 USB-C 20W Car Charger
Overview
Operating instruction
Thank you for choosing this Hama product! Take your time and read the following instructions and information completely. Please keep these instructions in asafe place for future reference.
Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates arisk of electric shock from touching uninsulated
product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- Car charger
- These operating instructions
Safety instructions
- When using this product, observe the applicable local trafficlaws and regulations.
- Take carethat components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.
- Don’t allow yourself to be distracted by the product when driving avehicle. Always pay attention to the surrounding trafficand your environment.
- Protect the product from dirt, moistureand overheating and use it in dry environments only.
- Donot drop the product and do not expose it to any major shocks.
- Donot operate the product outside the power limits specified in the technical data.
- Donot modify the device in any way.Doing so voids the awarranty.
- Donot continue to operate the product if it is visibly damaged.
- Use the product only for the intended purpose.
- Aswith all electrical products, this device should be kept out of the reach of children.
- Do not bend or crush the cable.
- Always pull directly on the plug when disconnecting the cable, never on the cable itself.
- Donot use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Only use the article under moderate climatic conditions.
- Donot use the product in areas in which electronic products arenot permitted.
- Donot use the product in adamp environment and avoid splashing water.
Risk of electric shock
- Donot open the device or continue to operate it if it becomes damaged.
- Donot use the product if the charging cable, adapter cable or power cable is damaged.
- Donot attempt to service or repair the product yourself.Leave any and all service work to qualified experts.
Operation
Note
12V,24Vvehicle electrical systems The charger is suitable for 12 Vand 24
Vehicle electrical systems.
Warning
connecting devices
- Before connecting a device, check whether it can be adequately supplied with the charger’s current capacity.
- Ensure that the power of the connected device does not exceed 20 W.
- Note the instructions in your device’s operating manual.
Note Power Delivery / QC 3.0, 2.0
- Plug &GO: no additional software required, simply plug in and start:
- Thanks to Power Delivery /QC3.0, 2.0, the voltage and power are adjusted automatically.
- Be aware that, for efficient and optimized charging, your terminal device must support the PD (Power Delivery)/QC 3.0, 2.0 function.
- If you have a large number of PD/QC-enabled devices with different firmware updates, it may be that the function is not fully supported. Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:
- Connect your device to the charger.
- Then connect the charger to the onboard electrical system’s car socket.
- The charging process is displayed on your device.
- Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
- Then disconnect the charger from the line connection.
- When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.
Note -car battery
With some vehicles, it can happen that power continues to be supplied even
though the ignition has been switched off.You should therefore disconnect the
product from the line connection when not in use to protect your car battery
from being drained.
Care and maintenance
- Only use soft, dry towels to clean the product.
Note
Disconnect the device from the mains before cleaning and during prolonged
periods of non-use.
Technical data
Warranty disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.