hama 00201501 Replacement Metal Plates for Magnet Universal Smartphone Holder Instruction Manual
- June 5, 2024
- Hama
Table of Contents
**hama 00201501 Replacement Metal Plates for Magnet Universal Smartphone
Holder**
Operating Instructions
Thank you for choosing Hama product.
Take your time and read the following instructions and information
completely.Please keep these instructions in asafe place for futurereference.
If you sell the device, please pass these operating instructions on to the new
owner.
Explanation of warning symbols and notes
Note
This symbol is used to indicate additional information or important notes.
Package contents
- 1x round plate, diameter 40 mm, silver
- 1x rectangular plate, 65 mm x45mm, black
Safety instructions
- Use the product only for the intended purpose.
- Protect the product from dirt, moistureand overheating and use it in dry environments only.
- When using this product, observe the applicable local trafficlaws and regulations.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way.Doing so voids the warranty.
Installation
Note
Never apply force when using the product or during installation.
- Remove the protective film (A)from the adhesive side of the metal plate (round or rectangular) and press it onto the desired adhesive surface (e.g. rear of a mobile phone) for afew seconds.
- The metal plate (B)can simply be inserted/stuck between the protective cover and the rear of the mobile phone.
Care and maintenance
Only clean this product using alint-free, slightly damp cloth and do not use any harsh cleaners.
Warranty disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.