OLIGHT Obulb 55 Lumens 4-Mode Orb Light Night Lights MCC Rechargeable Bedside Lamp User Manual

June 5, 2024
OLIGHT

OLIGHT Obulb 55 Lumens 4-Mode Orb Light Night Lights MCC Rechargeable Bedside Lamp

IN THE BOX

FEATURES

  • 4 light modes: warm white light(high/low), red light, and flashing red light, perfect to create a joyful and cozy vibe.
  • Both 55-lumen and 3.5-lumen brightness available for multiple purposes, and running up to 56 hours at the low setting
  • The magnetic charging, simple button, and light weight deliver an easy-to-use experience.
  • Made of safe and durable materials, the Obulb is IPX7 waterproof and 1.5-meter drop resistant.
  • Operating temperature: 0℃ – 40℃;
    Storage temperature: -20℃ – 60℃.

SPECIFICATIONS

  • All data above are test results according to ANSI/NEMA FL 1-2009 standards.
  • The tests are performed using the built-in battery that is fully charged.

PRODUCT OVERVIEW

BATTERY TYPE
  • Built-in 630mAh 3.7V Rechargeable Lithium Polymer Battery.

 UNLOCK THE LIGHT AT FIRST USE


Note: Before first use, please press and hold the button for over 2 seconds to unlock the product.

CHARGING

    • Before first use please fully charge the product.
  • Connect the USB end of the magnetic charging cable (MCC 1A) to an external USB power source, then attach the other end of the cable to the charging port at the bottom of the product. It takes 2 hours to fully charge.
  • Charged at 5V/max 0.65A.
  • The red indicator means charging, while the green indicator means charging completed.

Note: When the charging cable is connected for the first time, it is normal that the indicator of the cable flashes red once or twice to signal charging cable detection.

WARNING: Input voltage higher than 5V or voltage fluctuation may damage the IC, leading to short-circuit and even melting of the charging interface.

 HOW TO USE THE ADHESIVE METAL BADGE

  1. Clean and dry the paste position.
  2. Gently and carefully peel out the protective film and DO NOT touch the sticky side.
  3. Paste the sticky side of the adhesive metal badge onto the desired position and press it evenly until it is fixed in place.
  4. Attach the Obulb on the adhesive metal badge.

DANGER

  • DO NOT drop the light or impact it heavily to protect the built-in battery

WARNING

  • DO NOT charge the product if it becomes dirty or wet after used in a wet place. Before charging, please clean and dry it.
  • DO NOT let a pet play with it, in case the pet will bite and damage it.
  • DO NOT hit it as a ball, which may cause irreversible damage.
  • DO NOT use it as a baby toy.
  • It may be damaged or distorted at a temperature of 60℃ or higher.

NOTICE

  • When the light is turned off, the current output mode will be memorized for next activation.
  • The output brightness will decrease as the battery runs low and its voltage decreases, until the light goes off.
  • DO NOT use any charging cable other than the provided MCC 1A cable
EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

HOW TO OPERATE

The button is located at the bottom of the product. It can be operated by pressing the flat part of the bottom, or by pressing the top of the cover provided that the product sits securely on a hard surface.
ON/OFF: Single click the button to turn the light on/off.
CHANGE OUTPUT: When the light is on, press and hold the button to circle through warm white light (low), warm white light (high), red light, flashing red light
WARM WHITE LIGHT (LOW): When the light is off, press and hold the button for less than 2 seconds to access warm white light (low) directly.
LOCK/UNLOCK: When the light is off, press and hold the button for over 2 seconds, the light will be locked out after a short flash. Under the lockout mode, if press the button for less than 2 seconds, the light will be on with low white light momentarily. To exit the lockout mode, press and hold the button for over 2 seconds until the light is on with low white light after a quick blink.

EU-DECLARATION OF CONFORMITY

EU-Declaration of Conformity can be found here:
https://olightworld.com/ec-declaration

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
USB magnetic charging cable: One year.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com

Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals