OLIGHT Perun 2 Right-angle light Headlamp Outdoors Household User Manual

OLIGHT Perun 2 Right-angle light Headlamp Outdoors Household

IN THE BOX

SPECIFICATION

SUPPORTED BATTERY

• The light is equipped with a customized 21700 rechargeable battery. In case of emergency, another brand’s 21700 battery with a built-in protection board can be used (but charging is not supported). It may turn off due to other brands’ low battery protection current.
• Low Battery Warning: The light will vibrate once every 30 seconds when the battery power is less than 10%, except for the moonlight mode.

USB MAGNETIC CHARGING CABLE — MCC3

Parameter Specification

• Charging cable USB type A – magnetic charging
• connector, length: 0.5m
• Input USB A – Type DC 5V 2A
• Charging pattern CC&CV
• Maximum charging current: 2A
• The voltage of fully charged battery is 4.2V±0.05V
• Time to fully charge: 3.5 hours
• Charge indication Red：charging Green: full (over 95%) or disconnected with a flashlight

PRODUCT OVERVIEW

BEFORE FIRST USE

Remove the protective film from the lens, unscrew the body and remove the yellow insulating film.

• Connect the magnetic USB end of the charging cable to an external USB power source, then attach the other end of the magnetic charging cable to the charging port. It takes no more than 3.5 hours to fully charge the light ( For reference only. When the USB power supply is insufficient to provide 5V 2A power capacity, the charging time will be longer ).
• Before the first use please fully charge the product.
• Only charge with a standard USB magnetic charging cable, not compatible with other USB magnetic charging cables.

LANYARD ATTACHMENT

Put the pin tool through the light lanyard hole and then hook the lanyard to the hole.

PROXIMITY PROTECTION FUNCTION

When the proximity sensor detects an obstruction nearby, the brightness will automatically reduce. The light will shut down directly if the blockage continues for more than 60 seconds. The sensor is sensitive to occlusion only (the sensing distance will be different due to different colors and materials).

ATTENTION

1. Pay attention to protecting the lens from scratches. Scratches on the surface of the lens will reduce the luminous flux. In severe cases, it will affect the internal sensor performance, resulting in the failure of high and above modes.
2. Please keep the surface of the lens clean. Stains or water mist will affect the performance of the built-in sensor located in the black area, resulting in the failure of high and above modes, please erase in time.

HOW TO TURN IT INTO A HEADLAMP

1. Remove the pocket clip.
2. Put the flashlight into the bracket with the tail first.
3. Adjust the flashlight to the appropriate position.

DANGER

• DO NOT throw the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
• The battery can only be charged while installed in the flashlight. When charging, please use the provided charger for your light.

WARNING

• Keep out of reach of children.

• If the light is about to be put aside for a long time or be transported, please unscrew the body for half a circle to
  cut off the circuit.

• DO NOT use the turbo mode continuously when the environmental temperature is high in case the light body is too hot to hold.

• Ensure the battery is inserted with the negative ( – ) end pointing to the head of the light ( LED side ).

• Take good care of the battery; if the battery needs to be replaced, please keep the removed battery in a safe place.
  DO NOT mix it with the conductive metals.

NOTICE

• Moonlight and turbo mode are not the normal brightness levels ( low, medium, and high mode ). Under moonlight and turbo mode, press and hold the switch to enter the normal brightness level cycle.

• When the light is turned on, the light will return to the last used setting. Only moonlight, low, medium, and high mode can be memorized when the light is turned off. If the light is turned off on turbo mode, it will memorize high mode and will revert to the medium setting after 10 minutes.
  SOS mode cannot be memorized.

• When the battery capacity is less than 60%, the internal MCU will automatically shield the turbo mode and reset the high mode to the highest brightness level.

• Active thermal management: On turbo mode, overheating can be avoided by adjusting the power output.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

References

• Olight | Illuminate Your World.
• Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>