Shenzhenshidingwangshangmaozhongxin AP-TANS001 Ticket Dispenser User Manual

Shenzhenshidingwangshangmaozhongxin AP-TANS001 Ticket Dispenser

Package included

1. Ticket dispenser
2. Power cable with adapter
3. USB setup cable
4. 2.25’’ wide thermal paper roll
5. Keypad
6. USB Power cable
7. Display screen
8. USB Power cable

(Setup cable is used to set dispenser parameters and setting parameters needs our software. If you need set parameters, please add my skype.)

Instruction

1. Install Paper Roll
   Please put the paper roll like this. If there is not a paper roll or paper runs out, the dispenser will speak “NO PAPER

2. Power Connection and Antenna
   Connect the number dispenser, keypad, and a display screen with power supply by power cable and pull out the antenna of the display screen.(If the antenna of display screen is not pulled out, the number data of the keypad will not send to the display screen in time)

3. Number Dispenser Usage
   Click the take number button and get a numbered ticket as below. Note: Keep on pressing take number button for 5-6 seconds, your queuing number will become 001 and currently waiting people will become 0

4. Keypad Usage
   Current number: The current number in turn. Total number: The total number which clients take. 0-9: Input 000-999 numbers on keypad +/-: Nex number/former number. You can press “+” to call the next number one by one to ensure the correct queue sequence. E.x: The current number is 001, press “+”, then the current number will become 002 and display screen will show 002 and speak “number 002 please” Bell button. Press this button, the display screen will show and speak the current number. E.x: the current number is 001, press “+”, then the current number
   will become 002 and the display screen will show 002 and speak number 002, please.

5. Display Screen
   Display screen would show and speak the current number. On the side there are volume+/- buttons, you could adjust the volume through these two buttons.

6. Free Customization Service
   Free customization service includes showing your logo on the ticket; displaying time on the ticket; showing your company details on the ticket; voice prompt while taking numbers and more. NOTE: Customization needs our software to edit something, therefore, if you would like it, please add my skype: tracking. On skype i can send you this software, and teach your how to use this software. This process is very easy to be fulfilled within few minutes.

2 Bell Buttons: There are 2 bell buttons on the keypad, and their functions are the same. You could repeatedly press the “bell button” to keep on calling the current number

• F1: Emergency Insert button. If you would like some clients to jump the queue, for example, There are 10 clients taking numbers, and you would like number 005 client to jump the queue, please press the “F1” “5” “bell button”. In this way because the number 005 jumps the queue, therefore the number after 004 becomes 006.
• F2: Recover to 0 buttons: Keep on pressing “F2” for 2 seconds, the current number on keypad will become 0, and the display screen will show 000 and speak number 000please.
• F3: No function.

Fcc Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  this device may not cause harmful interference,
•  this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>