SMARTEK ST53W Portable Handheld Garment Steamer User Manual

Cautions for the first use

Remember, safety should be your first priority.

1. Never fill the water reservoir when the power cord is plugged in. 2. Allow the appliance to cool for at least 5 minutes after it has been used.
2. Do not place on unstable surfaces such as cushions while using the steamer.
3. Do not place the steamer close to walls and furniture, as steam may cause discoloration and warping.
4. Never add cold water to hot water; steam may shoot out of the filling hole and cause injuries. Always let the appliance cool before adding water.

Safety Instructions

1. Whenever you need to step away from the steamer, make sure that you unplug it and leave the steamer in a vertical position.
2. Please keep it out of reach of children.
3. DO NOT operate the steamer if it has been dropped, damaged, or has malfunctioned in any way.
4. CAUTION! Make sure your steamer is disconnected from the power supply before pouring water into the tank.
5. DO NOT immerse any part of the steamer in any type of liquid.
6. DO NOT use the steamer if the cord is damaged. Consult with the manufacturer to get your steamer fixed or replaced. (See last page for instructions)
7. To prevent the deposition of minerals in the steam holes, it is recommended to use distilled water for cleaner steam holes.
8.  Never use chemically descaled water.
9. Avoid directing steam towards people or animals. Steam is hazardous and can cause severe skin burns.

Product View

ST53BNV

1. Iron head
2. Fur brush
3. Power button
4. Machine body
5. Water tank

Filling with Water

1. Before filling the water tank, make sure the steamer is unplugged and held straight or placed on a flat level surface.
2. Open up the water tank by turning the steaming head to the Left and add cold clean water by using the measuring cup. Carefully monitor the water tank level during this process to prevent overfilling.
3. Never fill the water tank past the MAX line. 4. Place steaming head back on and turn to the Right to close.

Steaming

1. Fill the water tank in accordance with the “Filling with Water” instructions.
2. Plug the cord into the outlet.
3. By pressing the ON/OFF button, the steamer will automatically start heating up to an adequate and optimal steaming temperature.
4. The light “ON” indicates that the steamer’s heating system is currently working and maintaining an optimal steaming temperature.
5. Place the garment on a clean hanger. 6. Begin steaming slowly from the bottom to the top of the garment. The steam will rise along the inside and outside of the fabric, removing wrinkles (ONLY steam with vertical movements, NOT from side to side)
6. Periodically point the steamer away from the garment and smooth the fabric with your free hand.
7. . Repeat steps 6-7 as necessary until the garment is free of wrinkles.
8. When done steaming, press the On/Off button, unplug and allow the steamer to cool before putting steamer away.

Steaming Tips

1. Steaming on both sides of the fabric will help to remove stubborn wrinkles.
2. Delicate fabrics need to be steamed carefully to avoid damage by water spots.
3. Drapery and curtains can be steamed while still hanging.
4. Caution should be taken while using a ladder or step ladder. DO NOT use a stool, chair or revolving chair.
5. To steam towels, handkerchiefs and napkins, hang them over a rod or towel holder.

Handling & Storing

1. Use distilled water to avoid material build-up.
2. Empty any remaining water into a sink to minimize mineral build-up.
3. Store the steamer in a cool, dry place.

Troubleshooting

cord into an electrical outlet
The household circuit breaker has been tripped; there is a teem fuse
In the electrical circuit.| Reset the household circuit breaker or replace the blown fuse. Contact an electrician or your area’s electric provider.
The steamer heats up but there is no
steam| The water reservoir is empty| Refill the water reservoir
There is a mineral build-up in the steamer| To remove mineral build-up make sure that the steam holes on the cap are not clogged. Use a pin or any sod of thin pointed object which can fit through the hole to remove the build-up.
Water sprays out from the steamer’s
head| The water tank is overloaded| Release some water from the tank until the water level is
below ct, at the MAX level

Warranty

This product has a warranty for 1 year from the provable date of purchase against defects in material and workmanship. During this period such defects will be repaired, or the product will be replaced at no charge. This warranty does not cover damage caused by misuse, negligence, or improper installation. Warranty is also invalid in any case that the product is taken apart or serviced by an unauthorized service station.
TO CLAIM:
Purchasers must receive a Return Authorization Number by calling our service center at 1(888)380-2111 or visit our website www.smartekusa.com.net for more info. Once your return has been authorized, please send your package, prepaid postage, with a copy of your proof of purchase. You will also need to enclose a letter explaining the nature of your difficulty in detail. Please allow 2-4 weeks for return shipping.

Smartek USA Inc.
12 Hinsdale Street, NY 11207

Documents / Resources

| SMARTEK ST53W Portable Handheld Garment Steamer [pdf] User Manual
ST53W, Portable Handheld Garment Steamer, ST53W Portable Handheld Garment Steamer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>