BMPRO RV View Wall Mounted 12V Battery Monitor Owner’s Manual

BMPRO RV View Wall Mounted 12V Battery Monitor

POWERING YOUR ADVENTURES

Born by the innovative spirit of our parent company Setec, with over 50 years of experience in power solutions, and design and manufacturing facilities in Melbourne, we are the leading experts in RV power management. Inspired by the great Australian outdoors, we have created a range of rugged, smart and reliable products to power your adventures.
Our range of battery chargers, monitors, and power management systems for caravans gives you peace of mind when you are on the road, so that you can relax in even the most far-flung destinations, knowing that you have control over your vehicle’s power. To learn more about the BMPRO range of products, please visit our website teambmpro.com

SAFETY PRECAUTIONS

Please read the Safety Precautions before installing or using the review. Be sure to observe all precautions without fail. Failure to observe these instructions properly may result in personal damage, or personal injury which depending on the circumstances may be serious and cause loss of life. Correct installation is the most critical factor in ensuring the safe use of the review. If every consideration of these instructions has been satisfied, the review will be safe to operate. Keep the review away from water or other liquids. Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use alcohol, thinners, benzene or any other chemical cleaner. Do not allow any liquids to enter the housing. The review is a high-precision electronic product. It contains no user-serviceable parts inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service or repair by an unauthorized person will void the warranty. Product specifications are subject to change and improvement without notice.

ABOUT THE REVIEW

The review is designed specifically to operate with BMPRO’s BatteryPlus35. Monitor battery voltage, available battery charging sources and caravan load current consumption all from the convenience of a wall-mounted display fitted to the caravan interior.

WHAT’S INCLUDED

Included with this product are:

• RVView
• review Owner’s Manual

DESCRIPTION OF PARTS

WARNING INDICATOR

Indicates an issue, the review will display a warning indicator if:

1. There is a fault with one (or more) of the loads connected to the BatteryPlus35, for example, a short or overload of the fault. Use the Load Output Status Indicator on the BatteryPlus35 to identify the affected terminal and remove the faulty load.
2. BMPRO’s BC300 + CommLink has been installed and communication with the BC300 is lost.

POWER SOURCE INDICATOR
Displays the sources available to the BatteryPlus35 for charging the battery and powering the loads.

• AC MAINS ONLY
• AUXILIARY SOURCE ONLY
• SOLAR SOURCE ONLY
• SOLAR/MAINS BLENDING
• SOLAR/AUX BLENDING

BATTERY STATUS INDICATOR
Displays the status of the caravan battery connected to the BatteryPlus35.

• THE BATTERY IS IDLE AND 100% CHARGED
• THE BATTERY IS IDLE BUT IS NOT 100% CHARGED
• BP35 IS CHARGING THE BATTERY
• THE CONNECTED BATTERY IS DISCHARGING

SYSTEM VOLTAGE
Displays the system voltage. If a caravan battery is connected to the BatteryPlus35, the RVView will display battery voltage. Otherwise, the review will display the output of the BatteryPlus35 when in Power Supply Mode.

BACKLIGHT BUTTON
Press to turn the backlight of the RVView screen on and off. A single press will turn the backlight on. Press again to turn the backlight off, otherwise, the backlight will automatically turn off after 30 seconds.

OUTPUT CURRENT
The current provided by the BatteryPlus35 to power loads connected to the unit.

INPUT CURRENT
The total current drawn by the BatteryPlus35, from its input sources to power loads connected to the BatteryPlus35 and to charge the caravan battery. If the BatteryPlus35 is charging the battery, the input current minus the output current will indicate the battery charging current. This display may be blank if there are no input sources available and the battery is unconnected.

USING YOUR REVIEW

The review is designed to work with the BatteryPlus35 to display battery usage information. The review does not have an ON/OFF button. The review receives power directly from the BatteryPlus35 through the connected data cable. The review will automatically turn off if it is not receiving power from the BatteryPlus35.

SERVICING

Do not attempt to service the RVView yourself, OR dismantle, modify or repair the RVView yourself; this will void your warranty. If your review requires servicing, please consult your BMPRO dealer or visit teambmpro.com for assistance.

FAQS AND TROUBLESHOOTING

Need more help troubleshooting your review?
Contact our customer service team online at teambmpro.com/technical-support/ or give us a call at (03) 9763 0962.
Why has the RVView screen turned off?
The review receives power to run the monitor from the BatteryPlus35. If the BatteryPlus35 shuts power to the monitor, the review screen will turn off. The BatteryPlus35 will shut power to the review if:

1. The user-activated the remote switch connected to the BatteryPlus35. This turns off power to the data cable connecting the RVView and BatteryPlus35. Check that the switch has not been activated.
2. The BatteryPlus35 has entered Storage Mode and to conserve the remaining battery voltage will disable power to the review. To repower the RVView, plug the BatteryPlus35 into a power source and begin battery charging. When the battery is sufficiently charged, the BatteryPlus35 will enable power to the review.

SPECIFICATIONS

RVView

Input Voltage Range| 8-15V
Battery Drain| < 22mA with backlight off
Ambient Temperature| 0-50°C
Dimensions (mm)| 140W x 80Hx15.5D

WARRANTY TERMS AND CONDITIONS

Registering your BMPRO product is an important step to ensure that you receive all the benefits you are entitled to. Please visit teambmpro.com to complete the online registration form for your new product today.

1. BMPRO goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits under this Warranty are in addition to your other rights and remedies under a law in relation to the goods to which this Warranty relates (the Australian Consumer Law).

2. BMPRO warrants products against defects for a period of two years, commencing from the original date of purchase. Proof of purchase is required before you can make a claim under this warranty.
   HOW TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY

3. The RVView is designed to be installed by a suitably qualified installer. You or your installer should carefully inspect the products before installation for any visible manufacturing defects. We accept no responsibility in addition to our consumer guarantee obligations where a product has been installed incorrectly.

4. This warranty does not extend to product failures or defects caused by, or associated with, but not limited to: failure to install or maintain correctly, unsuitable physical or operating environment, accident, acts of God, hazard, misuse, unauthorized repair, modification or alteration, natural disaster, corrosive environment, insect or vermin infestation and failure to comply with any additional instructions supplied with the product.

5. BMPRO may seek reimbursement of any costs incurred by BMPRO when a product is found to be in proper working order or damaged as a result of any of the warranty exclusions mentioned in point 4 of this statement.

6. To enquire or make a claim under this warranty, please follow these steps:

   • Prior to returning a BMPRO product, please email customerservice@teambmpro.com to obtain a Return Material Authorisation (RMA) number
   • Package and send the product to: BMPRO Warranty Department 19 Henderson Road Knoxfield, VIC 3180 Please mark RMA details on the outside of the packaging
   • Please ensure the package also includes: a copy of the proof of purchase, a detailed description of the fault, and your contact details including phone number and return address.

7. BMPRO will not be liable for any costs, charges, or expenses incurred in the process of returning a product in order to initiate a warranty claim.

BMP
+61 3 9763 0962 | sales@teambmpro.com 19 Henderson Rd, Knoxfield VIC 3180 Australia teambmpro.com

References

• Smart RV Power & Power Management Systems, Chargers | BMPRO
• Technical Support - Power Management Systems | BMPRO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>