beurer HR 8000 Rotary Shaver Instructions

June 5, 2024
Beurer

HR 8000

beurer HR 8000 Rotary Shaver

beurer HR 8000 - QR Code

Read these instructions carefully and keep them for later use. Make them accessible to other users and note the information they contain.

WARNING

  • The device is intended only for domestic/private use, and not for commercial use.
  • This device can be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or people lacking experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely and are aware of the consequent risks of use.
  • Children must not play with the device.
  • Cleaning and user maintenance must not be per-formed by children unless supervised.
  • The hand-held part must be disconnected from the connection cable before it is cleaned in water.
  • When using the device in the bathroom, disconnect it from the power outlet after charging, as water in the vicinity constitutes a danger even when the device is switched off.
  • Never use the device with the mains adapter near baths, wash basins, showers or other objects containing water or other liquids due to risk of electric shock.
  • As an additional safety measure, we recommend the installation in the bathroom circuit of a residual-current protective device (RCD) with a rated operational current not exceeding 30 mA. Your local electrical specialist can provide you with the relevant information.
  • If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk.
  • The device may only be operated with the supplied mains adapter.
  • Under no circumstances should you open or repair the device yourself, as faultless functionality can no longer be guaranteed thereafter. Failure to adhere to this instruction will void the warranty.

Dear customer,
Thank you for choosing a product from our range. Our name is synonymous with high-quality, thoroughly tested products for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage, beauty and air. Please read these instructions carefully and keep them for later use, make them accessible to other users, and note the information they contain.

With kind regards,
Your Beurer team

1. Included in delivery

Check that the exterior of the delivery cardboard packaging is intact and make sure that all components are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address.

1 x HR 8000 rotary shaver
1 x 2-in-1 beard and sideburn styler
1 x comb attachment for the beard and sideburn styler
1 x shaver head protective cover
1 x mains adapter
1 x cleaning brush
1 x storage bag

2. Signs and symbols

The following symbols are used in these instructions for use, on the packaging and on the type plate for the device:

WARNING Warning notice indicating a risk of injury or damage to health.
CAUTION Safety note indicating possible damage to the device/accessory.
Note Important information to note
  Observe the instructions for use
Suitable for cleaning under running water.
Disposal in accordance with the EC Directive on Waste Electrical and

Electronic Equipment (WEEE).
IPX6| Protection against strong water jets.
IPX4| Protection against splashes
| Manufacturer
| CE labelling
This product satisfies the requirements of the applicable European and national directives.
| Dispose of packaging in an environmentally friendly manner
| Energy efficiency class 6
| Only use the mains adapter indoors.
| The device is double-protected.
| Polarity of the output terminal
| Short-circuit-proof safety isolating transformer
| Switching power supply
 EAC| The products demonstrably meet the requirements of the Technical Regulations of the EAEU.

3. Getting to know your device

With the HR 8000 rotary shaver, you can trim or shave your beard with ease and precision. The rotary shaver is suitable for wet and dry shaving.
The rotary shaver has a precision cutting system with three dual-ring shaving heads. The three spring-loaded dual-ring shaving heads ensure optimum contour alignment, even in hard-toreach areas.
You can achieve clean contours effortlessly with the integrated pop-up contour trimmer.
The device also has an extra 2-in-1 beard and sideburn styler for creating particularly defined beard and sideburn styles. The rotary shaver has an LED display with charging and battery indicator (0­100%), maintenance indicator and travel lock indicator.

The rotary shaver can be powered via battery or using the mains adapter supplied. A high-performance lithium battery ensures that you can use the rotary shaver for up to 60 minutes from just one battery charge.
The shaver head can be opened and rinsed under running water for hygienic cleaning.

4. Intended use

The HR 8000 rotary shaver is exclusively intended for shaving and cutting human facial hair. Do not use the rotary shaver on other body parts, animals or objects!
The rotary shaver is intended for private use only. It is not intended for commercial use.
The rotary shaver may only be used for its designated purpose and in the manner specified in the instructions.
Any improper use may be dangerous. The manufacturer is not liable for damage resulting from improper or incorrect use.

5. Warnings and safety notes

DANGER
To avoid damage to health, we strongly advise against using the device in the following situations:

  • Danger of suffocation by packaging material. Keep packaging material away from children.
  • Before use, inspect the device and accessories for visible damage. In the event of any uncertainty, do not use the device, and contact your retailer or the specified Customer Service address.
  • Keep the mains adapter away from water.
  • Never submerge the device in water or other liquid! Risk of electric shock!
  • If the device should fall into water while charging, despite following all safety precautions, immediately pull the mains adapter from the socket! Do not reach into the water! Risk of electric shock!
  • Have the device checked by an authorised specialist workshop before using it again. Danger to life due to electric shock!
  • If the device has been dropped or has suffered any other damage, it must no longer be used. Risk of electric shock and injury!
  • If there is visible damage to the mains cable/plug, do not use the device, and contact your retailer or the specified Customer Services address. Risk of electric shock!
  • Do not use the device if the shaver heads are damaged as they may have sharp edges -­ risk of injury!
  • Children must not play with the device.
  • Do not use extension cables in the bathroom, as it must be ensured that the mains adapter can be accessed quickly in an emergency.
  • Never use the device with wet or damp hands when it is connected to the power supply.

WARNING
To avoid damage to health, please note the following:

  • Ensure that no highly flammable liquids are located near the device. Risk of fire!
  • Do not use the device if you have sunburn, open wounds, eczema or cuts on your face.
  • Switch off the device before changing attachments.
  • Remove all packaging material before using the device.
  • Ensure that the mains cable does not pose a trip hazard.
  • Only connect the device to a socket that has the correct voltage as indicated on the type plate.
  • Only operate the device according to the specifications on the type plate.
  • Only pull on the mains adapter to remove the mains cable from the power outlet.
  • Under no circumstances should you open or repair the device yourself, as faultless functionality can no longer be guaranteed thereafter. Failure to comply with this instruction will void the warranty.
  • In the event of a fault or damage, have the device repaired by a certified specialist workshop.
  • Never leave the device unattended while in use.
  • Do not use the device outside.
  • If you pass the device to someone else, make sure to also pass on these instructions for use.
  • Switch off the device after every use.
  • Pull the mains adapter out of the socket after each completed charging process.

CAUTION

  • Protect the device and its accessories from impact, humidity, dirt, marked temperature fluctuations and direct sunlight.
  • Only operate, charge or store the device at temperatures between -10°C and 40°C.

Notes on handling batteries:

  • If your skin or eyes come into contact with fluid from the battery cell, flush out the affected areas with plenty of water and seek medical assistance.
  • Risk of explosion! Never throw batteries into a fire.
  • Do not disassemble, split or crush the batteries.
  • Only use chargers as specified in the instructions.
  • Batteries must be charged correctly prior to use. The instructions from the manufacturer, and the specifications in these instructions regarding correct charging must be observed at all times.
  • Fully charge the battery prior to initial use (see section 7).
  • In order to achieve as long a battery service life as possible, fully charge the battery at least 2 times a year.
6. Device description

1. Dual-ring shaver head| 9. Connection socket
2. Shaver unit release button| 10. Pop-up contour trimmer
3. Shaver unit| 11. 2-in-1 beard and sideburn styler
4. ON/OFF switch | 12. Comb attachment
5. Battery indicator (0–100%)| 13. Cleaning brush
6. Travel lock indicator| 14. Shaver head protective cover
7. Charging indicator| 15. Mains adapter
8. Maintenance indicator| 16. Storage bag

7. Initial use

You can power the device using the battery or the mains adapter supplied.

Charging the battery

You must fully charge the battery for approx. 90 minutes before the first use. The operating period of the device is approx. 60 minutes when it is fully charged.

How to charge the battery:

  1. Ensure that the device is switched off before charging the battery.
  2. Connect the mains adapter to a suitable socket.
  3. Plug the other end of the mains adapter into the connection socket on the underside of the device. The charge indicator will start to flash. The battery indicator displays the current battery state in percent. As soon as the battery is fully charged, the charging indicator illuminates continuously.
  4. Once the charging process is complete, pull the mains adapter out of the socket and the device.

Quick charging

If you have forgotten to charge the shaver before use, the quickcharge function can help. Connect the device to the power supply. The device will be ready for a complete shave via battery operation within 5 minutes.

Mains operation

To operate the device with the supplied mains adapter, proceed as follows:

  1. Connect the mains adapter to a suitable socket.
  2. Plug the other end of the mains adapter into the connection socket on the underside of the device. The battery indicator shows you the current battery state in percent and the charge indicator begins to flash. The mains adapter supplies enough energy to charge the battery and operate the device at the same time.
  3. After use, pull the mains adapter out of the socket and out of the device.

WARNING
Never use the device in the shower when it is being operated via the mains.
The hand-held part of the device must be disconnected from the connection cable before use in a damp environment.

8. Usage

Travel lock
The device has a travel lock. If the travel lock is activated, it is not possible to switch on the device. The travel lock prevents the device from switching on by accident (e.g. when transporting it in a suitcase).
To activate the travel lock, press and hold the ON/OFF switch for 3 seconds.
The travel lock indicator lights up.
If the ON/OFF switch is briefly pressed when the device is locked, the travel lock symbol will light up in the display to indicate that the device is locked.
To deactivate the travel lock, press and hold the ON/OFF switch for 3 seconds.

Direct drive function
If the battery is completely flat, you can continue using the device immediately via mains operation.

Tips for shaving/trimming

  • Clean your face before shaving to remove any dirt or grease from the skin. This will reduce skin irritation and make the shave feel more pleasant.
  • Apply light pressure and shave in circular motions to keep skin irritation to a minimum.
  • Shave the most awkward areas first, such as under the nose and along the jawline. This is because the shaver heads are still cool at the start of the shave, and if you need to shave over these awkward areas multiple times, the shaver heads may have warmed up towards the end of your shave and this can feel unpleasant.
  • Try to stretch the skin being shaved using your fingers.
  • The shorter the beard hair is, the more effectively the rotary shaver will shave.
  • If you switch from wet to dry shaving (or vice versa), it may take up to 3 weeks for your skin to get used to the new method.

Shaving with the shaver heads
Before you start shaving, make sure that the shaver is charged (see section “Charging the battery”).

  1. Make sure that the shaver unit is securely attached to the device.
  2. Remove the shaver head protective cover if it is still attached.
  3. Press the ON/OFF switch to switch on the shaver. The battery indicator starts to light up and displays the remaining battery capacity in percent.
  4. Apply light pressure as you move the shaver heads in circular motions across the areas of the face to be shaved.
  5. When you have shaved all the required areas of your face, switch the shaver off. Press the ON/OFF switch to switch off the shaver.
  6. Clean the shaver heads after every shave using the cleaning brush provided. For information on thorough cleaning, see section “9. Cleaning and maintenance”.

2-in-1 beard and sideburn styler
The shaver also has an extra 2-in-1 beard and sideburn styler and a comb attachment (3 mm) to create particularly defined beard and sideburn styles. How to use the 2-in-1 beard and sideburn styler:

beurer HR 8000 - Styler 1| beurer HR 8000 - Styler
2|
---|---|---
1. Remove the shaver unit from the shaver if it is attached. The shaver head must be held firmly on two sides and removed with a sharp tug.| 2. To attach the 2-in-1 beard and side-burn styler, push it down onto the shaver until you hear and feel it click into place. If you would like to trim your beard or sideburns to a length of 3mm, attach the comb attachment to the top of the 2-in-1 beard and side-burn styler.

3. Press the ON/OFF switch to switch on the shaver.
4. Slowly move the 2-in-1 beard and sideburn styler over the required areas to style your beard or sideburns.
5. When you have finished styling, switch the shaver off. Press the ON/OFF switch to switch off the shaver.
6. Clean the 2-in-1 beard and sideburn styler after every shave, using the cleaning brush provided.

Pop-up contour trimmer
The shaver has an integrated pop-up contour trimmer to help you shave or trim clean contours. How to use the pop-up contour trimmer:

  1. Push down the pop-up contour trimmer lock as shown. The pop-up contour trimmer flips up.
  2. Press the ON/OFF switch to switch on the shaver.
  3. Start to shave or trim clean contours using the pop-up contour trimmer.
  4. When you have finished shaving or trimming your contours, switch the shaver off. Press the ON/OFF switch to switch off the shaver.
  5. Clean the pop-up contour trimmer after every shave, using the cleaning brush provided.
9. Cleaning and maintenance

Cleaning the device

WARNING

  • Always remove the mains adapter from the power outlet before cleaning the device. Risk of electric shock!
  • Only clean the housing of the device with a soft cloth dampened with warm water or the cleaning brush supplied.
  • Do not clean the device with highly flammable liquids. Risk of fire!
  • Do not clean the device in the dishwasher.
  • Remove any residual hair from the device after each use. Use the cleaning brush provided for this task.
  • Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.

Cleaning the shaver heads under running water
Clean the device regularly, at the latest once the maintenance indicator symbol (see chapter 6 on device description) lights up in the display.
To clean the shaver heads very thoroughly, you can also rinse them under running water. How to do this:

beurer HR 8000 - Cleaning 11. Pull the shaver unit upwards to remove it from the device.
2. Push the shaver unit release button. The shaver heads open.
3. Hold the shaver heads under running water so that the jet of water runs through the shaver heads from the inside out.
4. When the shaver unit is completely dry, reassemble it, following the above instructions in reverse order.

beurer HR 8000 - Cleaning 2

10. Accessories and replacement parts

To purchase accessories and replacement parts, please visit www.beurer.com or contact the corresponding service address (according to the service address list) in your country. Accessories and replacement parts are also available from retailers.

Designation Item number and/or order number
3 x Dual-ring shaver head 580.18
11. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the device at appropriate collection points in your country. Dispose of the device in accordance with the EC Directive on Waste Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local authorities responsible for waste disposal.

WARNING
The integrated battery cannot be removed for disposal. Risk of explosion and injury.
The lithium-ion battery used in this device must not be disposed of in household waste, but must be disposed of correctly. For information on disposal, please contact the authorised seller or a municipal collection point.
During disposal, it must be pointed out that the device contains a battery.

Discharge the battery before disposal. Take the device and switch on the rotary shaver until the battery is flat.

NOTE
If it is not possible to discharge the battery due to a fault or damage, please consult your waste collection point.

12. Technical specifications
Model HR 8000

Weight (including shaver unit)
2-in-1 beard and sideburn styler| 169 g
34 g
Device dimensions| 16.0 x 6.0 x 5.9 cm
Device protection type| IPX6
Device input| 5 V ⎓ 1 A

Adapter protection type IPX4
Adapter protection class II

Voltage supply
(TPA-97050100B02)| Input: 100-240 V~; 50/60 Hz; 0.15 A
Output: 5.0 V ⎓ 1.0 A; 5.0 W
Average active efficiency| ≥ 73.98 %
No-load power consumption| ≤ 0.07 W

Battery:
Capacity
Nominal voltage
Type designation|

700 mAh
3.7 V
Lithium-ion

---|---

Subject to technical changes

13. Warranty/service

Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this product, subject to the requirements below and to the extent described as follows.

The warranty conditions below shall not affect the seller’s statutory warranty obligations which ensue from the sales agreement with the buyer.

The warranty shall apply without prejudice to any mandatory statutory provisions on liability.

Beurer guarantees the perfect functionality and completeness of this product.

The worldwide warranty period is 3 years, commencing from the purchase of the new, unused product from the seller. The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the context of domestic use.
German law shall apply.

During the warranty period, should this product prove to be incomplete or defective in functionality in accordance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.

If the buyer wishes to make a warranty claim, they should approach their local retailer in the first instance: see the attached “International Service” list of service addresses.

The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required.

A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with
– a copy of the invoice/purchase receipt, and
– the original product.

The following are explicitly excluded from this warranty:
– deterioration due to normal use or consumption of the product;
– accessories supplied with this product which are worn out or used up through proper use (e.g. batteries, rechargeable batteries, cuffs, seals, electrodes, light sources, attachments and nebuliser accessories);
– products that are used, cleaned, stored or maintained improperly and/or contrary to the provisions of the instructions for use, as well as products that have been opened, repaired or modified by the buyer or by a service centre not authorised by Beurer;
– damage that arises during transport between manufacturer and customer, or between service centre and customer;
– products purchased as seconds or as used goods;
– consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liability or other compulsory statutory liability provisions).

Repairs or an exchange in full do not extend the warranty period under any circumstances.

Subject to errors and changes

Beurer GmbH • Söflinger Straße 218 • 89077 Ulm, Germany
www.beurer.comwww.beurer- gesundheitsratgeber.com
www.beurer-healthguide.com

580.09_HR8000_2020-12-07_06_IM1_BEU

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals